Availability
Showing In Stock Items. Show All 33 Items.
Proform's brushless motor electric cooling fans deliver more cfm than the competition for maximum cooling. These brushless fans are lightweight, low-profile, no amp spikes, and create cooling unlike anything out there. The best part is, they are totally universal and designed for 12-volt systems. No fancy engine specific controller required, just wire up the (+) and (-), and you're good to go. Soft start ramp up prevents amp spikes. The brushless electric fans are designed to fit the most popular cars and trucks. Order the electric fan model designed for your application needs. Product features and benefits: * Prevents overheating in stop-and-go traffic * Designed to fit the most popular cars and trucks * Frees the water pump pulley for more rpm * Thin design to fit cramped locations * Reinforced glass filled polypropylene blade and plastic housing for minimized weight * Nylon tie mounting kit included * Installs in minutes with simple hand tools Note: This is strictly a puller fan and is not reversible. Not compatible with variable speed fan controllers using PWM technology. Works with normal on/off thermostat controllers.
( 63 )
$195.95
—
$199.95
Completely re-engineered, these RevMax transmission cooler thermostatic bypass upgrades are a direct bolt-in replacement. No lines are cut, nothing is altered. Simply disconnect your old lines and install them onto your new RevMax bypass. Utilizing RevMax's ZeroStat Technology, these billet 6061 aluminum cooler thermostatic bypass upgrade modules completely remove the orifice restriction for full cooler flow all the time. This equates to lower operating temperatures and helps to prolong the transmission's life. Order the model for your application. Features and benefits: * RevMax's ZeroStat patented technology provides increase in cooler flow due to the elimination of the orifice bottleneck located in the factory part * Direct bolt-in replacement—no lines are cut, nothing is altered, simply disconnect your old lines, and install them into the RevMax new bypass * There is no thermal controlled bypass valve which can fail and cause lack of cooler flow and complete transmission destruction * Instead of closing off cooler flow when the transmission is cold and making your transmission generate unneeded heat that is hard to shed later; RevMax bypass allows your cooler to immediately begin cooling transmission and not waiting for it to get hot, just to try to cool it later * You cannot properly flush your cooler lines without the aid of a hot flush machine that can get hot enough to open the bypass valve up but with the RevMax bypass upgrade you can use room temperature fluid to clean out your cooler anytime you wish without any special tools! * Moules with integral aluminum cooling fins aid in passive cooling of the block and fluid
Not Yet Reviewed
$109.00
Designed to fit the most popular cars and trucks, these Proform electric fans help to prevent overheating in stop-and-go traffic, increase gas mileage, and improve engine performance. They install in minutes with simple hand tools, and most are reversible (they mount in front or back of the radiator). Their ultra-thin design is perfect for hard-to-fit cramped locations. These fans feature a reinforced, glass-filled polypropylene blade and a plastic housing for minimized weight.
( 165 )
$174.99
—
$180.99
LG Billet USA radiator brackets come in several corrosion-resistant models for different vehicles and include highlights like an etched American flag design. Available finishes include machined and black anodized. Each radiator bracket has been engineered and manufactured for OEM-style fitment, but with improved appearance, durability, and functionality. Step up your restoration game and help bring billet back with the LG Billet USA radiator brackets best suited for your application. Other features include: * Pocket-style and smooth-style sides available * Fitment styles include 2- or 3-row cores and 4-row cores * Increased engine bay rigidity * Installation hardware * 3D-scanned, CAD-modeled, and CNC-machined for precision fit * Easily installed in minutes with a couple of tools
Not Yet Reviewed
$160.00
—
$200.00
Granatelli Motor Sports billet thermostat housings will upgrade your OE plastic housing to prolong the life of your motor. Factory units are known to crack, resulting in coolant loss. These replacement housings are made from 6061-T6 aluminum—and include a high-flow thermostat with copper, brass, and stainless steel construction for high reliability. No gaskets are required; the housings use factory bolts on the outside to maintain OE look and function, and they can be installed with basic hand tools. Order the model recommended for your engine application.
( 1 )
$154.61
—
$274.31
Doing any work on your ride is a lot easier and a whole lot more pleasant when you have the right tools for the job. Fragola Performance Systems hose test kits are one of those must-haves for your toolbox. These hose test kits from Fragola allow you to quickly test your -4 through -16 hose assemblies. Simply screw them into AN hose ends, pressurize them with your compressed air source, and submerge them into a water bath to look for bubbles. These aluminum line testers from Fragola are available individually or as complete kits, so you'll be prepared to check for leaks in any size hose.
( 19 )
$117.99
Derale heavy-duty tube and fin transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. For top-quality underhood cooling components, trust the expertise of Derale Performance.
( 3 )
$109.67
CSF racing radiators feature the most advanced and efficient radiator cores in the industry. Offered for both vehicle-specific and universal applications, they use innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. Specially engineered tubes in the shape of a "B" are carefully formed and then brazed over the seam. CSF is able to use thinner and lighter aluminum because this design is stronger than normal welded "O" shape tubes. With the inlet in the middle of a seam-brazed tube, the surface area of the tubes is increased approximately 15 percent over regular tubes. With CSF's B-tubes you get dual liquid laminar flow and the efficiency of two smaller tubes vs. one large tube in the same space. High-efficiency, multi-louvered fins are precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in CSF's wind-tunnel lab. CSF offers two all-aluminum end-tank designs to match any style and performance needs. CSF 7000 Series racing radiators have OE-style radial tanks that are flat, rounded, and welded together. Perfect for the customer who likes the sleek and smooth look, and wants to display the intricate welding. CSF deep-drawn end tanks are stamped to the same geometry of OE plastic end tanks. The only high performance manufacture to feature this advanced radiator technology; CSF deep-drawn end tanks feature less welding, and are generally considered the strongest tanks in the industry. Additional features of CSF racing radiators include: * Finished with CSF's Show-Stopper mirror polish process * CAD/CAM designed * Racing-style aluminum drain plug * Brazed in a controlled atmosphere brazing (CAB) furnace—the preferred process for aluminum * ISO 9001/9002 certification * Military-grade (special clad) aluminum used for tubes, fins, and headers * Plates and side brackets meet JIS 3003 specifications * Privately owned factories with full in-house tool rooms * CNC-machined fittings * TIG welded
( 34 )
$309.00
—
$325.00
These GM licensed electric fans from Proform look great and help prevent overheating in stop-and-go traffic. Designed to fit the most popular cars and trucks, they increase gas mileage, improve engine performance, free the water pump pulley for more rpm, and install easily within minutes using simple hand tools. The 10, 12, 14, and 16 in. fans are reversible (mount in front or back of the radiator). These fans feature an ultra-thin design to fit in cramped locations, and a reinforced, glass-filled polypropylene blade and plastic housing for minimized weight. They also include a nylon tie mounting kit, and each fan features the popular Chevy Bow Tie emblem in red.
( 6 )
$199.95
The engine auxiliary water pump circulates coolant through the cooling system in your vehicle. When failure occurs, your vehicle's engine will overheat and could leave you stranded. Dorman manufactures these water pumps from quality materials and they are direct-fit installations for your vehicle. They're easy to install and no special tools are required! Direct replacement for a proper fit No special tools required Easy to install
( 1 )
$156.99
—
$261.99
Dorman Air Conditioner refrigerant pressure sensors are designed to measure the amount of pressure in the A/C line to ensure the air conditioning system is operating properly. The A/C refrigerant pressure sensor is an essential replacement part, keeping your vehicle cool during the hot summer months or in year-round warm weather climates. Air conditioner refrigerant pressure sensor features: * Direct replacement for a proper fit * Replacement restores proper functioning of the A/C system * Easy to install; no special tools required * Part has undergone quality testing to meet product standards and quality
Not Yet Reviewed
$112.99
Clearance
Scratch & Dent
DeWitts direct-fit surge tanks install in the stock mounting position and use the factory connections without any modifications or adapters. Manufactured from original tooling, they feature a Harrison logo, original pressed fittings, and filling instructions. DeWitts direct-fit surge tanks are available in date-coded or non-dated coded models. Order the tank recommended for your vehicle.
( 2 )
$296.99
$267.29
Maradyne Champion series electric fans are great for use on remote transmission coolers, oil coolers, or intercoolers. They feature a reversible motor, so they can be used as a puller or pusher type, depending on your space constraints. They use sealed motors, perfect for harsh conditions, including off-road, and they can be sprayed clean without moisture entering the motor. The Maradyne Champion series electric fans have a glass-filled nylon shroud and blade and are high-temperature and impact-resistance for harsh underhood temperatures and greater resistance to flying road debris.
( 63 )
$165.11
Simplify radiator installation and removal! JOES Racing Products clamp-on radiator brackets bolt right on without welding. These flexible mounting systems are crafted from billet aluminum with multiple mounting holes for easy adjustment and a powdercoated finish for good looks. Easily locate your radiator side to side, while the top clamps unbolt quickly for easy radiator removal. The adjustable billet slider clamps will hold radiators of any thickness securely in place, and an air box can be fastened to the brackets. Don't fabricate a mess when you can install with ease and JOES clamp-on radiator brackets.
Not Yet Reviewed
$199.95
Summit Racing™ A/C selector duct assemblies direct air to different locations inside the cab of your vehicle. Made from quality materials, they will fit and function just like the originals they are replacing. Get your "cool" back with our Summit™ reproduction A/C selector duct assemblies.
Not Yet Reviewed
$121.99
Induction Innovations offers a collection of essential coils for your Mini-Ductor induction heater. These kits enable you to heat and release seized nuts, bolts, and other metallic hardware from corrosion and thread lock compounds This is a package of the most-used smaller diameter coils, manufactured in an assortment of lengths and sizes to fit a variety of applications. Benefits: * Each coil lasts for several hundred uses or more (subject to use); avoiding abrasion and overheating prevents premature wear to the coil * Coil insulation is coated to resist abrasion; but if insulation is breached, a new coil will need to be used * The coils are all flexible and can be bent or separated for a variety of applications * To use around corners or buried deep near plastic or rubber, simply bend to your desired configuration Kits include: * Two 7/8 in. pre-formed coils (MC99-601: 5 in. L x 1.25 in. W) * Two 3/4 in. pre-formed coils (MD99-611: 4.5 in. L x 1.25 in. W) * One 7/8 in. long pre-formed coil (MD99-605: 9.5 in. L x 1.25 in. W) * One 1 in. pre-formed coil (MD99-610: 8.25 in. L x 1.75 in. W) * One 7/8 in. long pre-formed coil (LCK) (MD99-621: 13.25 in. L x 1.25 in. W) * One 1 in. long pre-formed coil (MD99-622: 13.25 in. L x 1.75 in. W)
Not Yet Reviewed
$107.10
Our Summit Racing™ heater duct kits contain all the hose, diffusers, and hardware you need to distribute hot air efficiently.
( 25 )
$101.99
MotoRad offers integrated housing thermostats for a variety of car and truck applications from the 1990s and up. They feature high-grade stainless steel and copper construction, and are 100 percent tested and calibrated for consistent, precise response to your cooling system needs. The thermostats provide an OE design for worry-free direct-fit replacement; they meet or exceed factory standards. Order the model recommended for your vehicle.
Not Yet Reviewed
$102.99
Induction Innovations standard coil kits are an accessory for the Mini-Ductor Series and the Inductor Series U-555. These kits enable you to heat and release seized nuts and bolts up to 1.5 in. in diameter and other metallic hardware from corrosion and thread lock compounds. Kits include: * One 1 3/4 in. pre-formed coil (MD99-607: 8.75 in. L x 2.25 in. W) * One 1 1/2 in. pre-formed coil (MD99-608: 8.5 in. L x 2 in. W) * One 1 1/4 in. pre-formed coil (MD99-609: 8.25 in. L x 2 in. W) * One 1 in. pre-formed coil (MD99-610: 8.25 in. L x 1.75 in. W) * Two 7/8 in. pre-formed coils (MD99-601: 5 in. L x 1.25 in. W) * One 3/4 in. pre-formed coil (MD99-611: 4.5 in. L x 1.25 in. W) * One 7/8 in. long pre-formed coil (MD99-605: 9.5 in. L x 1.25 in. W)
Not Yet Reviewed
$134.10
Induction Innovations long coil kits are an accessory for the Mini-Ductor Series and the Inductor Series U-555. These kits enable the user to heat and release seized nuts and bolts up to 1.5 in. in diameter and other metallic hardware from corrosion and thread lock compounds Benefits: * Each coil lasts for several hundred uses or more (subject to use); avoiding abrasion and overheating prevents premature wear to the coil * Coil insulation is coated to resist abrasion; but if insulation is breached, a new coil will need to be used * The coils are all flexible and can be bent or separated for a variety of applications * To use around corners or buried deep near plastic or rubber, simply bend to your desired configuration Kits include: * One 3/4 in. pre-formed coil (P/N MD99-620: 13.25 in. L x 1.25 in. W) * Two 7/8 in. long pre-formed coils (LCK) (MD99-621: 13.25 in. L x 1.25 in. W) * Two 1 in. long pre-formed coils (MD99-622: 13.25 in. L x 1.75 in. W) * One 1 1/4 in. pre-formed coil (MD99-623: 13.25 in. L x 2 in. W) * One 1 1/2 in. pre-formed coil (MD99-624: 13.25 in. L x 2 in. W) * One 1 3/4 in. pre-formed coil (MD99-625: 13.25 in. L x 2.25 in. W)
Not Yet Reviewed
$165.60
Diagnosing a refrigerant leak at the evaporator can be difficult. Four Seasons evaporator cores are high-quality, OEM replacements for when your old one goes out. These aluminum evaporator cores are leak-tested for maximum durability and are available in sizes and styles to fit your application. It doesn't matter what season of the year it is--Four Seasons evaporator cores are ready for climate control.
( 31 )
$100.99
—
$139.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
