Availability
Mount one of these CSR water necks on your manifold, and you'll have an easy way to top-off your cooling system and still have a provision for overflow. Precision-machined from lightweight 6061-T6 billet aluminum, they'll bolt right onto your manifold or an existing 2 in. spacer. Each of these necks comes with stainless steel hardware; a cap is not included.
( 6 )
$132.50
—
$178.95
Replace your stock thermostat with new parts from Dorman. These quality components offer solution upgrades for your coolant outlets. Dorman offers thermostats for several applications. Don't wait for your engine to overheat or for the check engine light to illuminate--upgrade to reliable, OE-fitting thermostats from Dorman.
( 29 )
$102.46
Summit Bucks
ACDelco air conditioning compressors are an ideal choice for a custom hot rod project or standard OEM replacement. They're available in new or cost-alternative remanufactured units for fitment on a wide range of applications. The heart of any air conditioning system is the compressor—their primary function is to compress and transfer refrigerant gas. The intake side draws in refrigerant gas from the outlet of the evaporator. Once condensed to a gas, it's then discharged to the condenser, where it can transfer the heat that is absorbed from the inside of the vehicle.
( 91 )
$106.99
—
$271.99
These Trick Flow® Clevor water crossover kits allow you to mate the cooling passages of Trick Flow® PowerPort Cleveland cylinder heads onto a Ford Windsor engine block. They replace the water passage and thermostat housing on factory Windsor intake manifolds with one that redirects the coolant out of the front of the cylinder heads and moves the thermostat housing horizontally above the original Windsor location. Kits include: * Thermostat housing * 4 hose fittings * 2 suction cups * 4 hose clamps * 2 mounting bolts * 2 mounting washers
( 4 )
$144.99
Be Cool electric fan wiring harness kits are designed to work on all of their electrical fans. The sensors install in water jackets in your intake manifold or engine block. Choose from harnesses that activate the fans at 195 degrees F and turn them off at 175 degrees F, or activate at 185 degrees F and turn off at 165 degrees F.
( 29 )
$118.99
—
$189.99
These specialty brackets from Vintage Air are designed for use in applications that require added clearance, like tri-power or dual quad carburetors. You can mount your compressor with these top-mount brackets to clear tall valve covers, and there are no head bolt holes required. These brackets move the compressor forward to clear the intake oil filter. When you need more room, you need Vintage Air extra clearance top-mount brackets.
Not Yet Reviewed
$126.99
The worst thing you can do to that finely tuned machine is let contaminants and oil into your intake or crankcase. Keep that "blowby" out of your combustion and get a cleaner burn with your engine, thus improving efficiency. JR Race Car catch cans also keep that crud from building up around the intake by filtering it out before it gets there, preserving your vital components and helping to extend engine life. Keep your vehicle in top form with JR Race Car catch cans.
Not Yet Reviewed
$106.37
Allstar Performance low-profile aluminum water necks sit only 1.75 in. above the intake flange and feature a front exiting fitting. These Chevrolet V8-style water necks have a black anodized finish to help protect against corrosion, and include stainless steel hardware and an O-ring for sealing the base of the water neck to engine. Available in two neck outlet sizes, as well as a housing-only option, select the one ideally suited to your needs.
Not Yet Reviewed
$104.99
—
$123.99
Give your engine compartment a cleaner look by concealing the radiator, fans, and wiring while contouring your Roto-Fab elbow and other components with Roto-Fab radiator upper support covers. They are designed to be used with Roto-Fab intake systems; however, they will work with some other systems as well. The covers are available in choice of finishes, or bare, for those who wish to finish the covers themselves. The radiator covers install easily by using factory mounting points for the brackets. Once the brackets are installed, the radiator cover itself mounts with push fasteners.
( 6 )
$249.95
Lingenfelter temperature-based relay controllers are designed to control relays based on temperature sensor readings. They can be used to independently activate two relays to control fans, pumps, or other devices. These relays can also be used to activate intercooler water spray based on air temperature or alcohol injection based on intercooler temperature. Lingenfelter temperature-based relay controllers reduce noise and increase component life in your auxiliary cooling systems.
Not Yet Reviewed
$180.45
These Edelbrock water bypass kits will allow water to flow through the thermostat and out of the bypass spacer without going into the upper radiator hose. They include the cast aluminum bypass spacer, gasket, blue anodized fittings, and -6AN braided stainless steel hoses.
( 2 )
$143.95
Canton Racing billet aluminum water necks will not crack or break like conventional OEM water necks. They feature CNC-machined billet aluminum construction for ultimate durability. Canton Racing billet aluminum water necks are available with a standard 1 1/2 in. smooth hose connection or a -16 AN male threaded fitting connection. The water necks include stainless steel mounting hardware for the ultimate protection against corrosion.
( 38 )
$139.00
Keep your compressor in its place with support from Vintage Air compressor brackets. Manufactured from steel plate with smooth finished edges to fit properly, these brackets are available in several styles--low mount, side mount, top mount, and universal--to fit most applications of Chevy, Ford, Mopar, and more. Vintage Air also offers Steel-eez brackets made from laser-cut, jig-welded steel to mount your popular Sanden 508. These brackets include mounting hardware. For brackets that you know will fit and last, check out Vintage Air compressor brackets.
( 89 )
$195.99
On Sale
Summit Bucks
Mishimoto coolant reservoir tanks offer under-your-hood styling! Whether you're polishing the look of your engine bay or you just want to replace the plastic OEM tank, Mishimoto aluminum coolant reservoir tanks are your solution. These inclusive kits are delivered with a mounting bracket, hardware, and reinforced hose. Improve the aesthetics of your engine bay with polished aluminum coolant reservoir tanks from Mishimoto.
( 45 )
$234.95
$200.95
—
$211.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
