Availability
Showing In Stock Items. Show All 236 Items.
Flex-A-Lite Flex-Wave electric fans are the revolutionary way to move more air! These patent-pending electric fans not only produce greater airflow, but are also more efficient, and quieter than traditional S-blade and straight-blade designs. Designed using advance software and tested in a wind tunnel to verify increased airflow and improved efficiency, Flex-Wave fans move up to 20 percent more airflow than Flex-A-Lite Trimline fans, and up to 25 percent more airflow than the comparable electric fans on the market. With a new look, a selection of sizes available, and several aerodynamic advantages, Flex-A-Lite Flex-Wave electric fans are ready to cool your high-horsepower applications. Advantages include: * The leading edge of the fan blade is no longer a single, solid line. The sine-wave design creates leading edges that cut through the air first. This starts movement in the air around the blade with greater efficiency. * The wave surface of the blades creates channels for the air to move along, producing more airflow and reducing energy losses. * The wave surface forms a winglet at the tip of the blade, further increasing efficiency by reducing air vortices. * The trailing edge of the fan blade also has variations, which reduces wind noise.
( 155 )
$187.99
Body Parts radiator supports are aftermarket replacement products for your old or damaged factory units. Keep your radiator secure and your cooling system in tip-top shape with their steel supports parts. An affordable solution for your replacement needs.
( 72 )
$102.99
—
$247.99
Maradyne Champion series electric fans are great for use on remote transmission coolers, oil coolers, or intercoolers. They feature a reversible motor, so they can be used as a puller or pusher type, depending on your space constraints. They use sealed motors, perfect for harsh conditions, including off-road, and they can be sprayed clean without moisture entering the motor. The Maradyne Champion series electric fans have a glass-filled nylon shroud and blade and are high-temperature and impact-resistance for harsh underhood temperatures and greater resistance to flying road debris.
( 63 )
$135.23
—
$181.06
FlowKooler Hi-Flow mechanical water pumps resolve low-speed heating problems by doubling flow rates at low rpm and idle. CNC precision-machined impellers feature larger diameters, increased vane count, tighter clearances, shrouding, and porting. These unique design features help drop engine temperatures by up to 30 degrees, increase the block pressure to prevent hot spots on cylinder walls, and stop the formation of steam pockets in the block, all while delaying the onset of cavitation at higher rpm. FlowKooler Hi-Flow mechanical water pump impellers are protected from electrolysis and corrosion with a military-grade Type II Class II anodized surface coating.
( 746 )
$148.99
—
$178.99
Four Seasons air conditioning compressors are made using state-of-the-art technology and quality assurance processes. Their compressors are carefully assembled and then undergo a battery of stringent quality tests, including noise, function, leak, and pressure testing. You can feel confident that you're purchasing a high-quality product from Four Seasons.
( 164 )
$126.99
—
$274.99
Summit Racing™ classic OEM radiators are designed to give you top performance cooling, while fitting your vehicle's mounts, so your ride can have a new radiator without having to modify brackets and fittings. The radiators are available in various styles and sizes to best fit your application or engine bay design.
( 442 )
$281.99
A Summit Racing™ plastic/aluminum radiator gives your engine bay the current cooling update it needs. These units are designed for premium performance, while fitting your vehicle's original mounts, so your ride can have a new radiator without modifications to the brackets and fittings. The radiators are available in various sizes and styles to fit your application. Efficient and economical, Summit Racing™ replacement radiators are an excellent option to restore the cooling performance your vehicle requires.
( 81 )
$212.99
Improve engine cooling performance with Mishimoto electric fan and shroud kits! These kits are a direct OEM fit, without the excess weight or bulk of standard OEM shrouds. Mishimoto electric fan and shroud kits include Mishimoto slim electric fans and durable, lightweight aluminum shrouds that safely secure the fan blades from damaging vital engine components. Don't let their light weight and compact size fool you, though--Mishimoto electric fan and shroud kits flow a massive amount of air to your aluminum radiator, while driving out excess heat.
( 65 )
$254.95
—
$262.95
Some like chrome, some like powdercoat, some like nothing at all. No matter your preference, We have you covered with a big selection of Summit Racing™ mechanical cast iron water pumps. We have short and long pumps, standard and high-flow models, and a selection of finishes to meet your needs.
( 224 )
$101.99
Scott Drake offers replacement fan shrouds for a variety of muscle car applications from the 1960s and '70s. They're available in different sizes and materials, with easy bolt-on installation. Fan shrouds are a cooling system accessory that help to facilitate cool air flowing throughout your engine bay. Order the model designed to fit your vehicle.
( 76 )
$115.95
—
$239.95
High performance engines need high performance cooling--these Summit Racing Equipment® electric water pumps will keep that engine chilled after a mechanical pump retires. They are powdercoated for corrosion resistance and can move 35 gpm at 12 V to keep the operating temperature down. Built from aluminum and designed to be lightweight, these pumps are engineered to keep your under-bonnet cool on the track or street. When your mechanical pump falls short, these electric pumps are a great option to keep that performance level, while also being easy to install. They are available for various engine applications--find your engine's best fit and get it back to road-ready in no time.
( 89 )
$150.99
—
$169.99
Tuff Stuff Performance Platinum Series water pumps are constructed from lightweight aluminum, and are available in both standard- and high-volume flow rates. Choose from among long and short styles, clockwise and counterclockwise rotations, and several quality finishes. These mechanical water pumps are ideal for replacement or upgrade purposes. They're available for a wide variety of vehicle-specific applications.
( 66 )
$184.99
—
$224.99
Tuff Stuff Performance Supercool water pumps create 30 percent more flow to help cool engines under abnormal conditions. Ideal for race applications, these pumps are made from high-quality materials, such as aluminum and iron, and are available in a variety of finishes. Options include short and long style; standard and high-volume flow; clockwise and counterclockwise rotation; and different pilot diameters. Whether you're replacing or upgrading, there's a Supercool water pump for your specific vehicle.
( 410 )
$101.99
—
$283.99
Ford Performance Parts mechanical pumps are available in stock volume and Maximum Flow (high-volume) models. Stock volume pumps have an OEM-spec shaft and bearing with a stamped impeller, and are recommended for engines that operate below 6,000 rpm. Maximum Flow pumps feature heavy-duty ball/roller bearings for long life, a CNC-machined, curved vane impeller and billet hub, and distribute the same amount of coolant to both sides of the engine block. That eliminates hot spots, to help your engine produce maximum power without detonation or pre-ignition.
( 16 )
$106.99
Inspired by top Ford 4.6L engine builder Sean Hyland, these EMP Stewart Ford Mustang high performance water pumps fill an industry void of high performance water pumps for this engine. These EMP Stewart pumps are also perfect as cost-effective original equipment replacement upgrades. They are available in both long and short versions fitting either of the 2 or 4-valve 4.6L Mustang powerplants.
( 21 )
$199.95
Small block Fords are pretty compact engines. But their accessory drive setup tends to make swapping them into street rods or small engine compartments a little tougher. One of these Ford Performance Parts shorty-style mechanical water pumps will help solve that problem. These V-belt drive pumps are approximately 1.5 in. shorter than stock, allowing more fan and radiator clearance without recessing the firewall. They must be used with Ford Performance Parts Street Rod pulley sets, and the 4-bolt, long-style 3.950 in. harmonic damper.
( 10 )
$216.99
Scott Drake recovery tanks are designed to hold excess coolant from your system. They are manufactured from quality materials and include a cap and mounting clamps with stainless steel mounting hardware.
( 26 )
$141.95
The cool people at Vintage Air technology have done it again! Defining their commitment to creating superior products, Vintage Air offers SuperFlow condensers. These condensers have a unique micro tube design with improved refrigerant flow to provide much more capacity than any other comparable tube and fin condenser. By providing increased refrigerant contact with the micro tube walls, and multiple passes per circuit, SuperFlow condensers furnish more sufficient flow for a more efficient system and much cooler air. Vintage Air SuperFlow condensers are available in horizontal models, which are perfect for late model cars with more grille area, and vertical models for those tight spots in your classic street rod, and most include universal mount bracket kits. Oh, and by the way, increased condenser capacity means that more heat is dissipated, pressure drops, and your compressor turns more easily. "So what," you say? Well, if your engine isn't working as hard, you gain a boost of horsepower! Cool, huh? Vintage Air--the people who know all about living cool.
( 25 )
$183.99
REACH Cooling offers more than 1,000 radiator models, covering roughly 95 percent of popular automotive and light truck applications. All of their replacement parts are designed to meet or exceed original equipment specifications, ensuring that they will fit and perform just like stock. REACH aluminum radiators are available in crossflow or downflow styles; with numerous inlet/outlet size and location options. Many models also include a transmission cooler. Order the radiator recommended for your vehicle.
( 80 )
$100.99
—
$263.99
Keep your compressor in its place with support from Vintage Air compressor brackets. Manufactured from steel plate with smooth finished edges to fit properly, these brackets are available in several styles--low mount, side mount, top mount, and universal--to fit most applications of Chevy, Ford, Mopar, and more. Vintage Air also offers Steel-eez brackets made from laser-cut, jig-welded steel to mount your popular Sanden 508. These brackets include mounting hardware. For brackets that you know will fit and last, check out Vintage Air compressor brackets.
( 87 )
$126.99
—
$212.99
GMB high performance water pumps are designed to combat engine overheating associated with higher performance and load applications. They feature a precision-ground, heavy-duty steel bearing that's completely sealed and lubed for life. These replacement pumps have a specially modified, higher performance impeller that eliminates cavitation at all rpm—and maintains maximum volumetric flow of coolant throughout the engine. Order the model recommended for your application. Additional features: * Increase pump pressure up to 300 percent * Eliminate steam pockets trapped inside the engine block * Reduce engine temperature by 15-30 degrees * Help increase horsepower
( 235 )
$100.99
PRW High Performance mechanical water pumps are engineered to deliver increased water flow faster. These super velocity pumps significantly improve cooling for all street, high performance, and racing applications. The low pressure-injected, A356 aluminum alloy pump bodies are complemented by a precision, high-flow cast iron impeller design. Pressure-balanced water passages equalize flow and minimize engine hot spots at any speed. PRW High Performance mechanical water pumps are excellent alternatives for not only racers, but also trucks, towing, and motorhome applications. Order the model recommended for your specific vehicle and engine size. Features, items, and specs: * 35 gpm at 4,000 rpm with minimal cavitation and proportional increased flow rates at 5,000+ rpm * Aircraft industry tolerances * Heavy-duty 0.75 in. diameter steel shafts * Billet steel hubs and shielded-seal roller ball bearings * Back plate O-ring sealed for most applications * System Basis Chip (SBC) applications include adjustable hardware
( 29 )
$119.87
—
$267.71
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 214 )
$124.95
—
$177.95
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 159 )
$115.99
—
$117.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
