Availability
Showing In Stock Items. Show All 78 Items.
Summit Racing offers replacement thermostats for thousands of vehicles. They're offered in a variety of styles, materials, flow rates, temperature ratings, and more. A reliable thermostat is essential to your cooling system and overall performance—kicking in precisely when your engine needs it. Order the model best suited for your application.
( 360 )
$8.99
—
$9.99
On Sale
If you're running a single fan on your Corvette's stock radiator, then it's time to upgrade to DeWitt's aluminum electric dual Spal fan kits. These cooling systems are designed to move a massive amount of air when needed—the fan speed increases as temperatures rise. At the programmed upper threshold temperature, the primary fan speed reaches 100 percent and the secondary fan kicks in to help. As the temperature drops down, the secondary fan cycles off, and the primary slows, giving you a constant cooling temperature. You get uncompromised cooling under all driving conditions.
( 12 )
$529.99
—
$551.99
$476.99
—
$496.79
On Sale
Mr. Gasket high-performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpms. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced high-performance thermostats have brass-and-copper construction, and open at the right temperature regardless of engine rpm.
( 236 )
$29.11
—
$31.46
$21.83
—
$28.31
FlowKooler Robertshaw high performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpm. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced, high performance thermostats feature brass-and-copper construction and will open at the right temperature, regardless of engine rpm.
( 153 )
$28.99
Meziere 100 Series electric water pumps deliver 35-40 gpm of flow. Because they're electric, you won't have the usual horsepower loss at high rpm caused by a mechanical pump's impeller. Plus, their lightweight billet aluminum construction reduces overall engine weight. These pumps also feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal. They're available for a wide variety of V8 engines, including LT1 and LS1.
( 88 )
$341.08
—
$366.77
These billet electric water pumps from Summit Racing™ allow you to save both weight and horsepower. They're constructed from 6061-T6 billet aluminum, and flow more efficiently than your belt-driven stock pumps. In addition, they only draw 6.1 amps. Hardware and gaskets are included.
( 55 )
$222.99
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$1,699.99
On Sale
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 643 )
$423.54
—
$435.54
$398.54
—
$410.54
Improve your safety quotient with these Lev-R-Vent radiator caps from MotoRad. Lev-R-Vent radiator caps feature a unique pressure release lever that vents pressure prior to removing the caps, reducing the risk of injury. These caps are designed to easily fit in the smaller spaces of today's engines.
( 11 )
$7.99
—
$8.99
You always get optimum performance when your engine is running at the proper temperature. Chevrolet Performance thermostats are made of high-quality stainless steel and copper. They help your ride stay cool, to make sure that you get the most out of your vehicle. Stop the knocking, power reduction, and possible engine damage that high-temperature running can cause. Chevrolet Performance thermostats will keep your engine running at the perfect temperature--what more could you ask for?
( 10 )
$55.99
On Sale
DeWitts Pro-Series direct-fit aluminum radiators provide a 25 percent increase in cooling performance. They include features like two rows of one-inch wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—and they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 166 )
$805.99
—
$938.99
$725.39
—
$845.09
On Sale
BMR radiator supports will dress up your engine bay. They replace the existing plastic supports with a stronger and better looking part that weighs the same as the stock piece. New mounting hardware is supplied, making installation a simple task with big satisfaction.
( 12 )
$99.95
—
$149.95
$89.96
—
$134.96
Clearance
Few things get your attention as quickly as seeing white smoke billowing out from under the hood—and once stopped, precious anti-freeze all over the ground. OSC Automotive radiators are designed to fit into place as easily as the stock model came out; OEM models are used as a baseline, so their radiators meet or exceed the originals. To ensure great products, OSC starts with the highest grade of raw components, then follows factory construction standards to maintain longevity of the engine and transmission. Transmission and oil coolers are tested before installation on needed units, and radiator cores are qualified before and after assembly using state-of-the-art cycle, vibration, burst, and environment testing. OSC prides itself on solving OE design failures in order to provide radiators with better life expectancies than the originals. Over a thousand models are available for fitment on specific makes and models. Choose the style designed for your engine type and vehicle application.
( 290 )
$129.99
—
$193.99
Caspers Electronics electric fan control switches are easy to install and allow you to turn your car's electric coolant fans on manually, yet still retain stock fan operation. Stock cooling fans are set to activate at 215 degrees F, which is too hot for high performance use. The easiest way to optimize the performance of your car is to run it at a lower operating temperature. So, if you're sitting in traffic or at the track waiting in the staging lanes between rounds, you can activate your fans early to keep your engine operating efficiently and producing as much power as possible. Lowering your engine's operating temperature will not only increase performance, but it will also increase reliability and engine life by decreasing the stress caused by heat fatigue.
( 9 )
$57.99
On Sale
DeWitts direct-fit radiators install in the stock mounting position and use the factory connections without any modifications or adapters. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores contain two rows of cooling tubes, a serpentine fin, and are epoxy-free. These radiators feature press-formed end tanks and are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. They are available with a standard finish or an exclusive black ice epoxy coat for a great OEM look. DeWitts direct-fit radiators can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 4 )
$582.99
—
$635.99
$524.69
—
$572.39
Lingenfelter Performance Engineering offers premium-quality thermostats for several applications. They're all direct drop-ins with no modifications needed and each includes the rubber seal. Reduce coolant temperature, produce more horsepower, and improve performance with Lingenfelter Performance Engineering thermostats.
( 142 )
$28.45
Control the flow with Allstar Performance water outlet restrictors. The flow of water to your radiator aids in cooling, and these value-packed kits contain three differently sized aluminum restrictors to limit the flow and meet your application needs. The rings are compatible with more than a hundred make/model vehicles. Get just the right stream of water with Allstar Performance water outlet restrictors.
Not Yet Reviewed
$7.99
Universal Air Conditioner electric fans are part of their extensive line of cooling system components. Offered for a variety of makes and models with electric fans, each fan assembly is carefully manufactured to be a perfect OE replacement … for much less than OEM parts. Each model meets or exceeds OEM standards and is designed for quiet, dependable operation. So, instead of buying pieces individually to replace your non-working air conditioning and engine cooling system, save time and money with UAC's electric fans. Choose the model designed for fitment on your application.
( 1 )
$146.99
REACH Cooling offers more than 1,000 radiator models, covering roughly 95 percent of popular automotive and light truck applications. All of their replacement parts are designed to meet or exceed original equipment specifications, ensuring that they will fit and perform just like stock. REACH aluminum radiators are available in crossflow or downflow styles; with numerous inlet/outlet size and location options. Many models also include a transmission cooler. Order the radiator recommended for your vehicle.
( 34 )
$117.99
—
$154.99
Summit Bucks
Air conditioning orifice tubes can become clogged and prevent refrigerant and oil from reaching the vehicle's A/C compressor. Restore your A/C performance with ACDelco GM Genuine Parts air conditioning orifice tubes. They're manufactured to GM original equipment specifications to meet or exceed your expectations for fit, form, and function.
( 5 )
$4.99
On Sale
Summit Bucks
Mishimoto thermostats are effective in noticeably lowering engine coolant temperatures. These thermostats are built with high-quality wax and are shipped with new rubber gaskets (where applicable) for a good, leak-free seal. They are then digitally calibrated for precise operation. Mishimoto thermostats open up at a slightly lower temperature than OEM or standard thermostats once your engine is fully warmed up. This allows the coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. Whether you have a daily driver or a modified and upgraded turbo, Mishimoto thermostats will maintain optimal temperatures to efficiently cool your application.
( 73 )
$28.95
$26.06
Summit Bucks
ACDelco GM Genuine Parts engine coolant thermostats monitor the flow of coolant through your vehicle's engine and radiator. Built to the exact specification of your original component, these are the only GM-recommended replacements. Do not settle for anything less than the best; choose ACDelco GM Genuine Parts.
( 37 )
$17.99
Summit Bucks
ACDelco air conditioning compressors are an ideal choice for a custom hot rod project or standard OEM replacement. They're available in new or cost-alternative remanufactured units for fitment on a wide range of applications. The heart of any air conditioning system is the compressor—their primary function is to compress and transfer refrigerant gas. The intake side draws in refrigerant gas from the outlet of the evaporator. Once condensed to a gas, it's then discharged to the condenser, where it can transfer the heat that is absorbed from the inside of the vehicle.
( 91 )
$304.99
Do you want cooling improvement and performance? During a test, a Be Cool aluminum radiator was installed in a 1955 Chevy in about an hour and lowered its operating temperature from 220 degrees to 180 degrees F--even with the air conditioning going full-blast. Be Cool custom-fit aluminum radiators are designed to be an exact fit, and they feature 15 percent more cooling capacity than factory 4-core models. What's more, they can be used with all brands of antifreeze and are available in both standard and polished finishes.
( 122 )
$599.99
—
$949.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
