Chassis & Suspension
Availability
Welcome to the home of great handling and ride quality! We stock a huge assortment of car and truck chassis and suspension parts like shocks, struts, and coil and leaf...
Welcome to the home of great handling and ride quality! We stock a huge assortment of car and truck chassis and suspension parts like shocks, struts, and coil and leaf springs, so whether you want a smooth street ride, responsive race handling, or rugged off-road control, you can find all the parts you need for your suspension upgrades here. We have complete lowering kits for a road-hugging sport stance, and lift kits to accommodate massive tires and greater suspension travel. Summit also has steering components, sway bars, frame rails and connectors, tie rods, wheelie bars, and wheel tubs, plus engine, transmission, and...
Welcome to the home of great handling and ride quality! We stock a huge assortment of car and truck chassis and suspension parts like shocks, struts, and coil and leaf springs, so whether you want a smooth street ride, responsive race handling, or rugged off-road control, you can find all the parts you need for your suspension upgrades here. We have complete lowering kits for a road-hugging sport stance, and lift kits to accommodate massive tires and greater suspension travel. Summit also has steering components, sway bars, frame rails and connectors, tie rods, wheelie bars, and wheel tubs, plus engine, transmission, and suspension mounts and bushings.
Showing In Stock Items. Show All 37 Items.
When servicing your RideTech suspension, be sure to use the right parts. RideTech offers a wide variety of replacement air line fittings to ensure secure connections. They're manufactured from quality materials and install easily with no modifications. The push-to-connect fittings are available in a variety of sizes and configurations.
( 24 )
$6.00
Jones Racing power steering pumps are engine components with drive! These racing products are manufactured from lightweight aluminum and come with or without a built-in reservoir. They're ideal for rack and pinion or steering box setups and great for street use. The pumps produce up to 1,100 psi of pressure for easier steering. Take the turn to minimal effort with Jones Racing power steering pumps.
( 6 )
$227.57
—
$361.44
Allstar Performance power steering pumps with pulleys are durable and dependable. They provide smooth consistent steering. The pumps are rated at 3 gallons per minute and produce up to 1,300 psi at a recommended pump rpm range of 1,500 to 6,500.These pumps provide smooth and consistent steering.
( 10 )
$219.99
—
$249.99
You definitely know when your power steering pump fails--turning the wheel becomes a muscle-building chore. Tuff Stuff Performance offers a complete line of replacement pumps designed to look as great as they perform! The units are available in a variety of textures, finishes, and colors to set your engine bay apart from others at a car show or the race track. Manufacturing custom-finished components for hot rods and custom cars is Tuff Stuff Performance's business. Find the pump style and fitment for your vehicle, and never be without efficient power steering.
( 160 )
$186.99
—
$285.99
PSC Pro Touring power steering pumps are ideal replacements for a variety of applications. Their selection includes models, such as CBR, Saginaw P or TC Series, and GM Type 2. The pumps offer different inlet attachments and sizes, as well as multiple outlet quantities and sizes. Performance Steering Components is a leading authority for off-road, Circle Track, street and hot rod parts—keeping you safely in control of your vehicle. Order the power steering pump that's best suited for your ride.
Not Yet Reviewed
$659.99
—
$734.99
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 54 )
$275.00
—
$701.99
UniSteer power steering pumps are sourced straight from an OEM manufacturer and are put on a state-of-the-art test stand to ensure perfect performance and durability every time. They offer several low-flow and high-flow pumps with different finishes to choose from. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 5 )
$177.99
—
$301.99
All American Billet GM Type II (Saginaw TC Series) power steering pumps are designed for use with a remote reservoir (sold separately). The top fitting is -6 AN for connecting the pressure hose to the steering box; and the side fitting is -10 AN for the feed from the reservoir. Multiple finishes are available. Power steering pumps use engine power to generate hydraulic pressure, which then assists the driver in turning the steering wheel by pushing fluid through the steering system. The pump is typically powered by the engine's serpentine belt.
Not Yet Reviewed
$179.99
—
$198.99
Borgeson Universal remote power steering pump reservoirs are beautifully machined from billet aluminum. They feature a classy, sleek design with an O-ring sealed cap. These reservoirs are tapped for standard rubber hose fittings or AN fittings and come with a mounting bracket.
( 2 )
$109.66
—
$131.81
Holley power steering remote reservoirs are ideal for applications that can not fit a pump mounted reservoir. These lightweight aluminum reservoirs have an internal baffle and air separator to keep the fluid from getting foamy or overflowing. Choose from two styles of reservoirs--polished aluminum model for custom and racing applications that you can fabricate a mount for or use clamps for mounting, or black finish model that includes mounting bracket. Features: * Aluminum construction * Dual inlet ports support Hydro-Boost brake systems when used with Earls pump adapters * Port sizes: (2) -8 ORB ports on top (inlets) and (1) -10 ORB port on the bottom (outlet) * Includes fittings: (1) -6 AN Male flare to -8 AN ORB, (1) -10 AN Male flare to -10 AN ORB, and (1) -8 AN port plug * Vented cap allows excess pressure to be released
( 5 )
$178.95
VIAIR 444C dual onboard air systems deliver the vital compressed air source you may need, from the worksite to off-road adventures. These dual OBA setups are capable of inflating up to 40 in. tires, managing air locking differentials, and running your air tools. They include an air tank, compressors, hose, and all components needed to make the systems work. Follow the roads or forge your own trails—but go with the power and confidence that VIAIR 444C dual onboard air systems supply. VIAIR 444C dual OBA systems feature: * 2.5 gallon 200 psi VIAIR air tank * Two 444C VIAIR compressors * 30 ft. coil hose with quick-connects * Tire inflation gun with 200 psi gauge * 0-220 psi pressure regulator * Sealed pressure switch—165 psi on, 200 psi off * Two 40-amp relays * Inline fuse holder * 1/4 in. quick-connect coupler (M) * 1/4 in. 250 psi safety valve * 1/4 in. drain cock * Two 1/8 in. BSP to 1/4 in. NPT fittings * Three 1/4 in. compression fittings * 5-piece 1/4 in. NPT plugs kit * 6-port billet manifold with mounting bracket (1/4 in.) * Two 15 ft. 1/4 in. air lines * Electrical connections
Not Yet Reviewed
$919.50
If you're looking for a complete air system capable of filling up to 35 in. tires, then these VIAIR super-duty onboard air systems are just what you need. These air systems come with all of the necessary components to inflate tires, manage air locking differentials, and any other pneumatic needs that your vehicle may have. These VIAIR super-duty onboard air systems have everything that you need to stay on the trail all day long. Air systems feature: * Two 325C air compressors * 2 gallon air tank * 30 ft. coil hose with quick-connects * Tire inflation gun with 200 psi gauge * 0-150 psi pressure regulator * Blow gun air tool * 1/4 in. NPT female threads quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch * Two 40 amp relays * 1/4 in. NPT 175 psi safety valve * 1/4 in. NPT drain valve * Two 1/8 in. BSP to 1/4 in. NPT fittings * Five 1/4 in. NPT compression fittings * 20 ft. of 12-gauge wire with inline fuse holder * Electrical connectors
Not Yet Reviewed
$783.75
Does your off-road machine require some serious pneumatic backup power? If so, these VIAIR Xtreme-Duty onboard air systems will fill that requirement. These air systems are capable of inflating 37 in. and larger tires, managing air locking differentials, and any other air-related needs that your vehicle may have. With a 100 percent duty cycle, these VIAIR Xtreme-Duty onboard air systems are sure to keep your vehicle's pneumatic needs met and keep your tank-filling time to a minimum. Air systems feature: * Two 350C air compressors * 2 gallon air tank * 30 ft. coil hose with quick-connects * Tire inflation gun with 200 psi gauge * 0-150 psi pressure regulator * Blow gun air tool * 1/4 in. NPT female quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch * Two 40 amp relays * 1/4 in. NPT 175 psi safety valve * 1/4 in. NPT drain valve * Two 1/8 in. BSP to 1/4 in. NPT fittings * Five 1/4 in. NPT compression fittings * 20 ft. of 12-gauge wire with fuse holder * Electrical connections
( 1 )
$804.50
If you enjoy the outdoors as much as your 4x4 off-road machine does, then these VIAIR quarter-duty onboard air systems are for you. These air systems are suitable for many small pneumatic needs, including the inflation of outdoor recreational items and air horns. Built with a 25 percent duty cycle, these VIAIR quarter-duty onboard air systems can operate for about 10 minutes of continued used, provided that you give them a 30-minute cool-down afterwards. Air systems feature: * 275C air compressor * 2 gallon air tank * Accessory airline * Pressure switch * 40 amp relay * 1/4 in. NPT drain valve * 1/4 in. NPT compression fitting * 145 psi safety valve * 20 ft. or 12-gauge wire with an inline fuse holder * Electrical connectors
( 3 )
$315.50
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$899.99
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
Complement your bracket and pulley kit with these high-quality Billet Specialties remote power steering pumps. They are compact pumps for tight engine compartments and have pre-installed cad plated AN fittings, a flow rate of 3.5 gpm, and a pressure rate of 1,200 psi. These Billet Specialties remote power steering pumps feature all-new construction (not remanufactured) and are available in your choice of a natural or polished finish.
( 9 )
$284.95
—
$357.95
VIAIR's Continuous Duty onboard air systems are a compressed air solution for inflating off-road tires (up to 37 in.), as well as powering up a variety of pneumatic applications. These systems feature one of the most popular "C" model compressors, the 485C Gen II. The upgraded duty cycle of 100 percent at 200 psi and the larger head port size of 3/8 in. NPT allow for faster fill rates, along with increased airflow to your applications. With the VIAIR Continuous Duty onboard air system, you can easily air up off-road tires and other power pneumatic applications like air horns, air lockers, load leveling and more! Air systems feature: * 485C Stealth black air compressor * 2.5 gallon air tank * 30 ft. coil hose * Digital tire inflation gun with 180 psi gauge * 1/4 in. NPT female thread quick-connect stud * 1/4 in. NPT male thread quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch with relay * 1/8 in. NPT female thread to 1/4 in. NPT male thread reducer * 1/4 in. NPT 250 psi safety valve * 1/4 in. NPT drain valve * 1/4 in. NPT compression fittings * 20 ft. of 12-gauge wire with an inline fuse holder * Electrical connectors * IP67 ingress protection rating
( 3 )
$705.25
Do your off-road trail adventures force you to deflate your tires to get through those tough obstacles? If so, these VIAIR Constant Duty onboard air systems are perfect for you. These air systems include everything that you need to install an air system on your vehicle and provide a 100 percent duty cycle to get those big tires inflated again. Specifically designed to fill 37 in. or larger tires, these VIAIR Constant Duty onboard air systems will ensure that you can re-inflate your rubber to get home when the trail day is over. Air systems feature: * 450C air compressor * 2.5 gallon air tank * 35 ft. coil hose * 1/4 in. NPT female thread quick-connect stud * 1/4 in. NPT male thread quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch with relay * 1/8 in. NPT female thread to 1/4 in. NPT male thread reducer * 1/4 in. NPT 175 psi safety valve * 1/4 in. NPT drain valve * Three 1/4 in. NPT compression fittings * 20 ft. of 12-gauge wire with an inline fuse holder * Electrical connectors
( 3 )
$522.50
Do you enjoy taking your off-road rig out on the weekends, but need some extra assurance that you won't be left stranded on the trail because of an air-related issue? These VIAIR heavy-duty onboard air systems are sure to give you the peace of mind that you're looking for when it comes to your vehicle's pneumatic needs. Specifically designed for inflating up to 35 in. tires, these air systems come with all of the necessary components for a successful installation. Go ahead and be aggressive on the trail--these VIAIR heavy-duty onboard air systems can handle whatever pneumatic demands you put them through. Air systems feature: * 400C air compressor * 2.5 gallon air tank * 1/4 in. NPT male thread quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch with relay * 1/8 in. NPT female thread to 1/4 in. NPT male thread reducer * 1/4 in. NPT 175 psi safety valve * 1/4 in. NPT drain valve * 20 ft. of 12-gauge wire with an inline fuse holder * Electrical connectors
( 4 )
$409.99
Kleinn medium-duty onboard air systems offer higher pressure and capacity—which means a longer, louder blast of your horns! These kits have many features that simplify installation and prolong the life of the product. The compressor bodies are sealed and moisture/dust-resistant to make installation on the exterior no problem. The steel air tank has five ports and is configured so that no matter how you mount it, there is always a drain port available on the bottom. They also include a "snorkel system" for remote intake mounting. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order Kleinn medium-duty onboard air systems. More product features, items, and specifications include: * Compressor model 6275RC (150 psi) * Remote-mount air filter housing with element (plus one replacement filter) * Heavy-duty, heat-resistant, stainless steel braided leader hose with built-in check valve, mounting brackets, and hardware * Only compressor orientation not recommended is upside-down * Black epoxy 1.5-gallon air tank with five 1/4 in.-NPT ports * Pressure switch (1/4 in.-NPT; 110 psi on/145 psi off) * Safety valve (1/4 in.-NPT; 170 psi) * Compression fitting (1/4 in.-NPT) * Drain cock (1/4 in.-NPT)
Not Yet Reviewed
$349.95
For the ultimate in onboard air system capability and styling, these VIAIR ultra-duty onboard air systems are perfect for your 4x4 off-road vehicle. These onboard air systems feature a 100 percent duty cycle compressor and all of the necessary components to inflate tires, manage air locking differentials, and any other pneumatic needs that your vehicle may have. These VIAIR ultra-duty onboard air systems are the ultimate packages for your 4x4 off-road vehicle. Air systems feature: * 480C chrome 200 psi air compressor * 2.5 gallon air tank * Tire inflation gun * 30 ft. coil hose * 1/4 in. NPT male thread quick-connect stud * 1/4 in. NPT male thread quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch * 1/8 in. NPT female thread to 1/4 in. NPT male thread reducer * 3/8 in. NPT female thread to 1/4 in. NPT male thread reducer * 1/4 in. NPT 250 psi safety valve * Three 1/4 in. NPT compression fittings * Accessory airline * 20 ft. of 12-gauge wire * Electrical connectors
( 1 )
$556.33
These Summit Racing™ GM Type II remote reservoir pumps are the perfect upgrades to replace your bulky Saginaw power steering system. These compact pumps dress-up any engine, adding a clean and uncluttered appearance.
( 25 )
$214.99
—
$219.99
Eddie Motorsports GM Type II power steering pumps are the perfect finishing touch for your engine bay. Pumps are available in a variety of finishes with or without reservoir for remote mounting. Reservoirs are available in seven different custom finishes. The pump is intended as a replacement for pumps supplied in Eddie Motorsports pulley kits. Please verify the correct inlet and outlet size for your particular kit. Eddie Motorsports GM Type II power steering pumps include pressure valves for both power steering gear boxes (3 to 3.5 gpm/1,500 psi) and rack and pinions (1.5 to 2 gpm/1,200 psi).
( 23 )
$166.00
—
$186.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
