Truck & Car Suspension Parts & Kits

Trail-Gear Leaf Spring Perches

Lift kits and taller tires are a necessity when navigating serious off-road trails. Whether you need to make adjustments to pinion angles or tire fitment in the fender wells, Trail-Gear leaf spring perches have you covered. These 1/4 in. steel perches feature the standard center hole, with additional holes drilled 1 in. in front and behind the center to avoid crunching fender well sheet metal. When running longer rear springs for greater flex, you may need to move the axle forward—while larger tires with stock length springs sometimes hit the front, requiring the axle to be moved back. If you're adding a larger lift, it's advised to change the angle of the perches in order to set proper pinion angles. Properly mounted lift kits and taller tires can greatly improve your vehicle's off-road capabilities, but steep driveline angles and tires hitting the edges of fender wells will bring nothing but trouble. Give your vehicle many options with Trail-Gear leaf spring perches.

5.0 out of 5 stars ( 7 )

$39.99

Auto Metal Direct Shock Mounts

Auto Metal Direct shock mounts are an exact OE fit to make it easier to replace your crossmember/brace and rear shock mounts. They fit perfectly over the axle on the underside of the rear floor pan to save you time and frustration. Attention to detail is the hallmark of every Auto Metal Direct sheet metal component.

5.0 out of 5 stars ( 6 )

$13.99

—

$341.50

Low Range Off-Road Complete Contact Axle Pads

Low Range Off-Road complete contact axle pads provide more contact with the axle than other spring –over-axle pads to provide the strength needed for hardcore off-roading. They are laser cut from thick steel and CNC press bent for accuracy. The top of each axle pad is cut from a flat sheet, and allows a 100 percent flat surface for your spring, instead of the curved surface of some bent pads on the market. The pad surface is longer than OE pads to help with axle wrap issues that may come from narrower pads, ensuring maximum spring-to-pad surface area. Other features of Low Range Off-Road complete contact axle pads include: * 3/16 and 3/8 in. laser-cut steel construction * Fully TIG-welded for superior strength and looks * Laser-cut sides fully match the axle tube and original lower perch for complete contact * Each pad has multiple spring pin holes on the top to allow for suspension adjustments

Not Yet Reviewed

$143.45

—

$288.35

Helix Mustang II IFS Upper Control Arms

Helix Mustang II IFS upper control arms are Grade "A" units to provide your hot rod with maximum performance. They are fully assembled, ready-to-install, direct replacements for stock upper control arms on any Helix Mustang II IFS application and will fit most stock or aftermarket crossmembers without modification. Helix upper control arm assemblies feature all-steel, 12-point TIG-welded construction for maximum strength and durability, corrosion/rust-resistant painted tubes, powdercoated cross shafts, and a full .120 in. thick wall aircraft-quality tubular design which is lighter, yet much stronger than OE stock designs and provides for more clearance for body sheet metal. The cross shafts have a knurled surface mount area which provides "bite" into mounting surface area, preventing slippage and holding alignment settings. Helix upper control arm assemblies are equipped with a screw-in ball joint with urethane dust boot and grease fitting, castle nut with cotter pin, castle nut spacer, Nyloc nuts, and plain washers.

Not Yet Reviewed

$279.95

Unplugged Performance Coilover Suspension Kits

Unplugged Performance coilover suspension kits are engineered with a wide spectrum of adjustment for both height and damping to satisfy both street and track uses. They are more comfortable than stock when set to soft, yet meanwhile, on track performance is so dialed in that it managed to impress our development driver Randy Pobst when turned up to firm. Treat your Tesla to an Unplugged Performance coilover suspension kits. Specifications include: * Height adjustable--fully personalize the height of your Model 3 from factory heights to slammed! * Damping adjustable--easy to use 24-way adjustable control simultaneously adjusts the ratio of rebound and compression damping. Rebound damping regulates the speed at which your shock bounces back from an impact (pothole, bump, hard cornering). By adjusting rebound damping, one can customize the ride and handling of Model 3. * Correct droop setting at any height--independent ride height adjustment ensures correct preload setting without sacrifice and handling loss at different heights. * Easy to access external adjustment knob included for fast access in the frunk. * Every shock is custom engineered, utilize high-grade internal technology and components, and after assembly they are placed on a shock dyno to validate the exact results. * High-flow D-port pistons with super low-friction seals and rod guide bushings * High-end monotube design is lighter with more consistent performance when driven hard. * Progressive bump stops * Swift linear coilover springs--the best coilover spring money can buy. * Swift thrust sheets ensure silent operation * Retains the factory upper damper mounts to mitigate the transmission of excessive noise and vibration into the passenger cabin * Simple and straightforward installation onto you Tesla Model 3 (about 3 to 4 hours)

Not Yet Reviewed

$2,599.99

Landrum Elite Series Coil Springs

Landrum is proud to present its Elite Series coil springs for Circle Track racing. After extensive research, development and engineering, these front and rear coil springs exceed the high demands racers and crew chiefs expect. Elite Series springs are made from chrome silicon high-tensile steel and are lightweight. They deliver the most travel with no loss in spring height or rate. As always, Landrum Performance Springs provide the tightest tolerances in the industry—and you always get a dyno sheet to prove it! Don't settle for the anything less but the best when it comes to suspension performance. Elite Series springs are available in a variety of heights, diameters, and dozens of spring rate options (from 50 lbs./in. through 1,000 lbs./in.). Elite Series front coil spring features: * Available in front or rear coil spring applications (specify when ordering) * All front springs are closed and ground on one end to provide proper contact with the jack plate, not forged * All rear springs are closed and ground on both ends, which ensures proper contact with the jack plate and spring seat * The opposite end is either open or closed tangential to fit properly into the lower control arm * Cold wound, not hot wound, so each coilover spring is properly heat-treated and stress-relieved to ensure sides of the spring remain parallel during installation * Powdercoated, not plated, to protect the spring from hydrogen embrittlement, a corrosive breakdown of the spring's surface which decreases the spring's life * Each spring is designed with the correct pitch and height ratio to ensure consistent rate throughout the entire cycle

Not Yet Reviewed

$99.99

—

$104.99

BDS Suspension Lift Kits

BDS Suspension lift kits are tailor made for specific lift ranges on select trucks and SUVs. These kits are designed to help improve your vehicle's stance with all the necessary components to properly lift the body and provide more clearance for larger tires and wheels. They are designed for 100-percent bolt-on installation and provide a new steering arm (application dependent) for proper steering angles and improved handling. Get your 4x4 suspension components from the company with the mission of making things right with no excuses when you order the BDS Suspension lift kits specifically designed for your application. More product features, items, and specifications may include (application dependent; see the product page, short description, and/or any attached Instructions Sheet for details): * Glide-Ride leaf springs * Brake line brackets * Standard NX2 or FOX upgrade nitrogen shocks with vehicle-specific tuning * High-strength lift blocks and add-a-leaf provide a level front-to-back stance * Extended length U-bolts Available rear lift options: Block Kits * Part of the base kit * Cast lift blocks * Designed to provide correct pinion angles Block Kits with add-a-leaf * Replaces worn-out factory leaf springs * Provides additional lift * New center pins Leaf Springs * Eliminates need for lift blocks * Reduces axle wrap for more controlled and stable feel * Multi-leaf progressive design for smoothness * Maintains factory payload weight ratings Available shock options: * NX2 Nitro Series * FOX 2.0 Performance Series

Not Yet Reviewed

$1,255.00

Scott's Hot Rods IFS Packages

Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options

5.0 out of 5 stars ( 4 )

$3,372.50

—

$6,468.99

KYB AGX Adjustable Gas Shocks and Struts

AGX adjustable gas shocks and struts are built with the advanced engineering and quality that you would expect from KYB. The AGXs have velocity-sensitive valving that gives you a comfortable ride under gentle driving conditions, and yet automatically gets firmer as the driving gets more serious. These shocks let you tune the damping for your driving conditions without having to lift the vehicle or remove anything to change the settings. You select the damping rate simply by turning an external knob on the body of the shock, or via a screwdriver slot on the top of the piston rod, depending upon the make and model of the vehicle.

4.69 out of 5 stars ( 65 )

$164.24

Dorman Premium Chassis Control Arms

Dorman Premium Chassis control arms are precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles. With durable construction and manufactured to strict standards, they are direct replacements for specific vehicles offering a reliable fit and performance just like the originals they are replacing.

3.83 out of 5 stars ( 6 )

$83.99

—

$128.99

Dorman Control Arms

These Dorman control arms were developed to meet the rigorous demands of today's passenger cars, pickups, and SUVs. They use new technology designed for smooth, responsive steering. Replace your worn control arms with direct fit parts from Dorman.

4.38 out of 5 stars ( 279 )

$68.99

—

$105.99