Availability
Fully assembled and bench-tested ARB on-board high performance air compressors install into your vehicle and include a full, snap-together, fuse-protected wiring loom with solenoid plug-in contacts, mounting hardware with reinforcing bracket, and an OEM-quality compressor isolating switch. With the addition of an ARB-171302 pump-up kit (sold separately), they can be used to activate ARB Air Lockers, and perform other functions such as inflating camping gear. So what makes these compressors special? They're small enough to fit into even the tightest space and quiet enough to mount in the cab. They have enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes. And, they work. ARB has tested these units in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and they continue to perform. Features of ARB on-board high performance air compressors include: * Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply * Fully sealed components for moisture and dust protection * Over-pressure safety valve-equipped * Pressure switch-controlled air manifold system specially designed for ARB Air Lockers * Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life * Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing * Motor is internally thermal-protected against extreme temperature damage * Comprehensive-photo illustrated installation guide * Range of accessories available
( 9 )
$545.70
Belltech Street Performance twin-tube shocks set the standard in performance handling for sport trucks. Their low-speed compression characteristics help to control pitch and roll, while their progressive rebound tuning allows you to use large aftermarket wheels and still have a smooth, firm ride. Get the performance and quality that you're looking for when you order the Belltech Street Performance shock models designed for your application. Other features may include (application dependent): * Oversized galvanized steel shock bodies with steel dust covers * Sturdy 35mm valves and 15mm or 18mm piston rods * Available vehicle-specific or adjustable damping tunes * Progressive-rate polymer bump stops
( 505 )
$79.95
Belltech designed the ND2 OEM shocks to provide the truck and SUV market with a unique blend of shock tuning. This new setup concentrates on the comfort level while also increasing the overall performance of the complete suspension system. Developed with the daily driver truck and SUV customer in mind, Belltech Engineers increased the low-speed compression and massaged the rebound forces of the shock valving to deliver a factory-style quality ride, along with better road feel and grip. ND2 OEM shocks feature: * Metal dust boots * Hardened chrome piston rods * Triple lip NBR rod seal * PTFE guide bushing * 30mm pistons with low-friction PTFE seals * 45mm wide body for increased oil volume * OEM-quality rubber bushings offer maximum durability
Not Yet Reviewed
$65.00
Buick, Chevy, Chrysler, or Dodge—whatever type of vehicle you drive, Summit Racing™ has just the right suspension components, including these loaded strut assemblies. They're application-engineered to your vehicle's unique riding and handling characteristics for better suspension performance. Hundreds of models are available, for fitment on vehicles from the 1980s and up. Summit Racing™ loaded strut assembly features: * Twin-tube, nitrogen-charged design for better performance * Consistent robotic TIG welds * High-range -45 to +450 degree grease applied to all bearings * Strut rod nuts are torqued to OE specs and retain the OE spring compression * Phosphate finished and painted for corrosion resistance * Chrome plated pistons for added life * Neoprene strut boots included * Rubber seat and bumper meet or exceed OEM specifications * High-quality NOK seals * Every unit is put through a 300,000-cycle durability test
( 272 )
$107.99
Get great handling for your ride with Mevotech Supreme sway bars. These quality suspension components are built to match or go beyond OE standards to help reduce body roll, and control oversteer and understeer in corners. The over-built sintered metal-to-metal technology enhances the sway bars durability and a corrosion-resistant surface treatment prevents the buildup of rust for longer service life. Made of quality steel, these stabilizer bars include the end links and hardware for a straightforward installation. Don't just repair or replace worn components—bolster them with Mevotech parts!
Not Yet Reviewed
$136.99
Dorman sway bars keep your vehicle's suspension dynamics under control. These OE replacement sway bars offer a better-than-stock fit, with a Dorman-improved solid forged design with high-quality materials and a strong finish to resist corrosion in the center or at the ends. Replace rusty originals with a better OE-fitting part--sway bars from Dorman, the OE solutions people.
( 55 )
$112.95
Suspension is one of the most important factors in determining your vehicle's day-to-day drivability, and the first step in suspension tuning is to upgrade your vehicle's stock springs. H&R Sport springs are high-quality units that will not set or sag, and are designed and manufactured to be strong, resilient, and durable. H&R's Sport spring kits streamline the look of your vehicle with a reduced fender well gap, as well as lower your vehicle's center of gravity, reducing body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. Additional features: * Crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance * Shot-peened to increase their life by more than 200 percent * Each spring is 100 percent tested * All production is completed in-house, so product quality is ensured * H&R's ISO9001 certified production facility in Germany
( 2 )
$458.99
—
$698.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
