Availability
Showing In Stock Items. Show All 203 Items.
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
Arnott New OE magnetic shocks and struts are a direct replacement for Magnaride vehicles. These magnetically controlled struts and shocks provide the same highly adaptive ride as the OE. The monotube damper is filled with magnetorheological fluid which is a synthetic hydrocarbon oil that contains iron particles that are easily magnetized. The damper includes electromagnetic coils which, when turned on, instantly change the bonds between the magnetized iron particles to alter the viscosity and stiffness of the suspension. Arnott New OE magnetic shocks and struts fit the left or right side, connects to the vehicle's ECU, and requires no modifications.
( 70 )
$529.34
—
$672.19
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$575.00
—
$615.00
Firestone Ride-Rite Red Label air spring kits protect and stabilize loads, increasing safety when hauling heavy loads. They provide a more comfortable ride and a more level load with less bottoming out when towing. Each kit includes the air springs, brackets, and hardware necessary for installation. Additional features and specs: * 7,500 lbs. of carrying capacity * Installs in about 90 minutes * Manual fill * 5 psi minimum pressure * 150 psi maximum pressure * Compatible with in-bed hitch * No drilling necessary for installation
( 2 )
$726.01
McGaughy's rides on the reputation of their parts being bolt-on installations, and they make sure that their control arms work hand-in-hand with necessary factory suspension components. McGaughy's suspension engineering capabilities are endless, and they continue to release the high-quality suspension parts that the public demands.
( 5 )
$794.99
—
$845.99
Fox Racing Shox 2.0 Performance Series coilover IFP shocks were developed through advanced technology—and with a long list of features that set them apart from other coilovers. The precision metal impact-extruded aluminum body increases cooling capacity and is rust-resistant; and the vehicle-specific upper mount includes a composite bushing that isolates noise and vibration. Locking spring preload rings (that allow easy ride height and preload adjustment) retain a top-quality racing coil, selected to deliver the optimal spring rate. Easy to install, IFP shocks provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions. The shocks are available in dozens of models and options for applications from 1995 and up. Additional features include: * Body: 2.0 in. impact-extruded and CNC-machined 6061-T6 aluminum one-piece body resists rust over time * Body plating: Clear-anodized for a durable finish * Reservoir: Internal IFP monotube reservoir design separates shock oil from the high-pressure, nitrogen-charged gas chamber * Components: Black-anodized, CNC-machined 6061-T6 billet aluminum * Shaft: Hard-chrome plated heat-treated alloy steel * Piston: race-developed high-flow piston design * Valving: Application-specific valving to maximize performance * Seals: Redundant sealing pack system main seal, wiper seal, scraper seal * Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Bearing: Large diameter, heavy-duty spherical * Bolt-on installation
( 10 )
$629.95
BDS Suspension heavy-duty radius arms upgrade the weak factory stamped steel versions on your vehicle. They add strength, functionality, and styling, plus correct the suspension geometry when used with lifted applications. Built from heavy wall tubing, these arms are gusseted and fully welded for superior strength, along with larger OE-style rubber bushings to isolate NHVs with zero maintenance needed. The design offers additional tire clearance along with more ground clearance over drop brackets. BDS radius arms are finished in a durable textured black powdercoat and most have lower cam slots for easy caster adjustment.
Not Yet Reviewed
$614.95
ACDelco GM Genuine Parts shocks and struts can help support your ride like no other. GM Genuine Parts are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors.
( 112 )
$504.99
—
$769.99
Air Lift LoadLifter 7500XL air spring kits feature massive 7 in. double-bellow air springs designed to enable greater leveling strength at lower pressures—and provide up to 20 percent more air spring volume than the LoadLifter 5000 air springs. Their exclusive upper and lower roll plates protect the air springs from any possible abrasion damage and help increase load capacity by up to 10 percent. Most Air Lift LoadLifter 7500XL air spring kits utilize the exiting holes in your vehicle's frame to provide bolt-on installation with no drilling required. They also include end caps made of ultra high-strength, corrosion-proof, nylon composite that's as strong as steel, but weighs less and will not rust. If you need a high performance air spring kit for you heavy-duty truck, Air Lift LoadLifter 7500XL is your answer.
( 25 )
$609.95
—
$719.95
Your big rig is the big boss with the Hellwig Big Wig on board! These American-made sway bars offer your heavyweight hauler, tow vehicle, or truck camper more stability in those heavily loaded conditions--over 20 percent more! Big Wig sway bars provide extra control that comes from Hellwig's larger-diameter design, plus the extra heavy-duty hardware. Together, both provide maximum durability, with the ability to tackle the extra load. Are you putting on weight? Haul big payloads, tow heavy trailers, or add a camper to your bed, but first add a big shot of performance for a more safe, more stable, more confident ride--add Big Wig sway bars from Hellwig.
( 83 )
$563.17
—
$639.90
IHC Suspension offers replacement control arms for countless truck applications—including models from Chevrolet, GMC, Ram, and Ford. The steel tubular arms are black powdercoated to resist rust and corrosion. Most of the kits include adjustable control arms to achieve the desired ride height, along with ball joints, polyurethane bushings, and hardware. Order the control arms recommended for your vehicle.
( 6 )
$570.00
—
$760.00
Firestone RED Label air spring kits utilize a pair of convoluted air springs to raise your truck back up to factory height while hauling or towing heavy freight. They're built to extreme specifications found in the most demanding applications. These "helper" kits can handle up to 150 psi and level loads up to 7,500 lbs. (not to exceed the vehicle's GVWR). The air springs include high-strength steel alloy brackets, Grade 8 fasteners—and an enhanced coating technology which protects against elemental conditions, such as corrosive de-icing agents and salt spray. Choose the Firestone RED Label air spring kit designed for fitment on your vehicle.
( 5 )
$762.32
Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.
( 177 )
$680.99
—
$849.99
When an independent front suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding these Old Man Emu control arms brings the alignment cams back into an acceptable range for both caster and camber. Each control arm is carefully constructed to meet all VSB14 requirements. The ball joint housings and eyelets are made from forged steel for added strength. The ball joints are greasable and include protective caps to endure rough conditions, while also holding up long-term. All of this is coated in a durable black powdercoat finish that looks great and protects the control arms. Order the pair recommended for your vehicle application.
( 2 )
$679.95
IHC Suspension is excited to announce the most complete air spring helper bag kits in the market. They're available for countless truck applications—including models from Chevrolet, Ford, and GMC. These replacements are 100 percent bolt-on, requiring no drilling, welding, or cutting. The helper bags are rated at 1,500 lbs. each. Order the kit recommended for your vehicle. (Note: Not all kits will fit lifted or long bed trucks.)
Not Yet Reviewed
$550.00
—
$575.00
Improve traction without limiting wheel travel with BDS Recoil traction bar kits, made with heavy wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They offer a full float design for bind-free performance and can be installed with a range of lift heights. BDS Recoil bars are fabricated from 2 in. O.D. x 3/16 in. wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut. Using a forged housing with large 1 1/4 in. x 12 threaded shank, a single sided snap ring, and a one-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. Choose the kit designed for your vehicle.
Not Yet Reviewed
$675.95
Arnott suspension strut and coil spring assemblies are "Engineered to ride and built to last". Offering high-quality at a competitive price, these shocks and struts deliver the stability, handling, control, and comfort of the original OE shock without any external commands from the vehicle. Arnott engineers have determined and tested the optimal internal shock settings to mimic the OE performance. Features and benefits: * Custom-valved shock adapted to driving style * Improved seals to prevent leaks * Electronic to passive shock technology
( 2 )
$593.94
—
$654.90
Time for a suspension upgrade? You can increase wheel travel by upgrading your OE upper control arms to BDS performance. BDS Suspension front upper control arms are specially designed for leveled and lifted applications, and they come fully assembled, ready to install right out of the box. Built from high-strength 1.5 in. O.D. x .120 in. thick wall steel tubing, the UCAs feature an indexed ball joint cup to correct the ball joint positioning. They can be used with BDS lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific rubber bushings and premium quality, greaseable ball joints for smooth, quiet operation, and superior durability compared to arms featuring uniballs, poly bushings, or heims. Choose the upper control arms designed for your vehicle.
( 1 )
$770.95
Belltech dropped front spindles are designed to improve handling and retain exceptional ride quality. These spindles maintain suspension geometry, eliminating the excessive ball joint, shock, and tire wear that is common with other forms of lowering.
( 198 )
$515.00
—
$595.00
RideTech has upgraded the traditional notion of sway bars with their MuscleBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MusceBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions
( 24 )
$595.00
Made from heat-treated 4140 chromoly spring steel, these Hellwig anti-sway bars reduce body roll, even during tight cornering. They come with high-durometer polyurethane bushings to ensure superior performance—and install easily with basic hand tools. Mounting hardware is included.
( 569 )
$530.34
—
$774.63
Air Lift WirelessAir 2nd generation on-board air compressor systems allow you to inflate and deflate each air spring independently to different pressures. The one-touch control from inside or outside the vehicle makes them perfect for uneven or top-heavy loads. And with two user-defined memory buttons, WirelessAir can remember your frequently used settings. Control the air like a boss with your Air Lift WirelessAir 2nd generation kit. Features and items: * LCD-display wireless controller * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * Heavy-duty air compressor * All wiring, hardware, and fittings required for installation
( 1 )
$665.95
Bilstein B8 5112 suspension leveling kits are high performance lift kits which provide more ground clearance, allow for larger tires, and increase wheel travel. Designed for front applications, the kits consist of B8 5100 shock absorbers combined with matched coil springs. These simple, yet effective kits will bolt into the factory locations with no modifications. Bilstein B8 5112 suspension kits provide a smooth and stable ride both on and off-road. Order the model designed for fitment on your vehicle application.
( 8 )
$525.00
—
$584.00
If you're looking for fun and good looks with a head-turning pickup that you can depend on tomorrow and for years down the road, then Belltech lowering kits are the right suspension choice. Each suspension system that they offer is specifically designed to work and fit properly on your vehicle.
( 91 )
$726.00
—
$747.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
