Availability
Showing In Stock Items. Show All 35 Items.
BMR Level 2 suspension handling packages are matched and developed to handle the twists and turns of your favorite road. Installation of these American-made components takes only a few hours of your time with basic hand tools. You can install superior handling on your ride today with BMR Level 2 Suspension handling packages. These BMR Level 2 handling packages include: * Lowering springs * Front and rear sway bars * Bilstein shocks * Upper and lower A-arms * Rear upper and lower control arms * Control arm mount braces
( 8 )
$2,349.00
Made from heat-treated 4140 chromoly spring steel, these Hellwig anti-sway bars reduce body roll, even during tight cornering. They come with high-durometer polyurethane bushings to ensure superior performance—and install easily with basic hand tools. Mounting hardware is included.
( 569 )
$269.00
—
$986.45
RideTech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with RideTech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck
Not Yet Reviewed
$3,995.00
—
$4,315.00
BMR sway bars are the most significant handling upgrade you can make to your vehicle. With hand tools and about an hour or so of your time, BMR sway bars will deliver the most noticeable handling improvement to your ride. BMR chooses to cold form their tubular sway bars instead of the conventional hot formed process. For you that means better resistance to torsional fatigue, more consistent "memory" retention, and money well spent for lasting performance and driving enjoyment. BMR put countless hours into developing and testing the ideal rates for their bars, so feel their passion for perfection by installing one of their sway bar kits--you're in control with BMR Suspension.
( 102 )
$259.95
—
$599.95
Dial in your ideal ride quality with the independently adjustable compression and rebound valving of QA1 Proma Star double adjustable coilover systems. They offer the perfect balance of street-ability and performance and are an ideal choice if you plan to use your car on the road and occasionally take it to the track. With QA1 Proma Star double adjustable coilover systems you will improve overall handling, increase suspension tunability, and gain the ability to adjust ride height quickly and easily for a perfect stance and corner balance your car, maximizing performance. They are easy to install with basic hand tools in the factory mounting locations and does not require the use of a toe link relocation kit. Coilovers are available with multiple spring rate options to help you find the perfect option for your intended use. The medium springs are great for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering, and providing a more planted feel.
( 3 )
$1,682.95
QA1 1961-71 D100 independent front suspensions update your classic 2WD Dodge truck with coilover shocks and rack-and-pinion steering. The IFS kits instantly transforming the old-school feel of leaf springs and a straight axle to greatly enhanced truck performance with late-model drivability and the perfect lowered stance. QA1 coilovers make it easy to achieve the ideal look while tuning ride characteristics to meet your unique needs. Choose from kits that offer 3 to 4 in. of drop or 5 to 6 in. of drop to lower the front of your truck while gaining much better geometry. You also have the choice of single or double-adjustable coilovers. Kits come complete with everything you need to bolt in the system. Contents and features of QA1 D100 IFS kits: * Front crossmember * Tubular control arms * Steering rack * Spindles * Ball joints * Inner/outer tie rods * All necessary installation hardware * The kits can be bolted in with simple hand tools without any cutting, welding, or the use of a lift, and can be completed without removing the inner fender aprons * Single-adjustable shocks are recommended for trucks that will be used primarily on the street * Double-adjustable coilovers are recommended for trucks that will consistently be used for drag racing, autocross, or road racing
Not Yet Reviewed
$3,977.95
—
$4,257.95
Now you can easily give your C20 or R20 truck adjustable ride height, adjustable shock valving and improved geometry with QA1's 1967-1991 C20/R20 front coilover conversion systems. Each kit comes with QA1's proven single or double adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 upper and lower control arms are manufactured from steel tubing for increased strength and powdercoated for long-lasting durability; topped off with performance ball joints and low-friction, maintenance-free bushings. You can easily install the kit in your driveway or garage using basic hand tools. No welding required. Everything is included, all the way down to the hardware. Select the QA1 C20/R20 coilover conversion system for your application needs. Features of 1967-1991 C20/R20 front coilover conversion systems: * Kits are available with single or double adjustable coilover shocks (please specify kit needed when ordering) * Adjustable ride height with up to 1 in. to 3 in. of drop and up to 6 in. with aftermarket spindles * Retains 8-bolt wheels * Improves ride and handling * Single-adjustable shocks with 18 clicks of valving adjustment gives you a very simple way to adjust your shocks without taking them off the truck—you can simply soften or stiffen the ride by turning one knob * Double-adjustable shocks with 18 clicks of independent compression and rebound valving adjustment are great if you really want to fine-tune your shocks on the street or plan to track your truck * No welding required Fitment Notes: Total amount of ride height drop depends on wheel and tire fitment. Requires spindles that use 1971-1986 C20 ball joints.
Not Yet Reviewed
$2,668.95
—
$2,878.95
Detroit Speed Chevy II subframes are bolt-in replacements for the original stock subframe. They improve the handling and ride quality by utilizing Detroit Speed's unique suspension geometry. These are the ONLY Chevy II frames in the aftermarket industry with OEM-quality stamped crossmembers for improved structural rigidity. The bay bars feature rigid integral hood hinge mounting and are hidden when used with Detroit Speed's Chevy II Inner Fenders package. Order the Chevy II front frame model with the coilover options preferred for your application. Subframe suspension kits include the following components: * Tubular upper and lower control arms * Aluminum body coilover shocks * Torrington bearings * Coilover springs * Power rack and pinion steering * Integrated splined sway bar * Control arm cross shafts with caster tuner bushings • Forged Detroit Speed spindle • Composite sway bar bushings • Spanner tool for easy shock adjustments
Not Yet Reviewed
$9,804.95
VIAIR 444C dual onboard air systems deliver the vital compressed air source you may need, from the worksite to off-road adventures. These dual OBA setups are capable of inflating up to 40 in. tires, managing air locking differentials, and running your air tools. They include an air tank, compressors, hose, and all components needed to make the systems work. Follow the roads or forge your own trails—but go with the power and confidence that VIAIR 444C dual onboard air systems supply. VIAIR 444C dual OBA systems feature: * 2.5 gallon 200 psi VIAIR air tank * Two 444C VIAIR compressors * 30 ft. coil hose with quick-connects * Tire inflation gun with 200 psi gauge * 0-220 psi pressure regulator * Sealed pressure switch—165 psi on, 200 psi off * Two 40-amp relays * Inline fuse holder * 1/4 in. quick-connect coupler (M) * 1/4 in. 250 psi safety valve * 1/4 in. drain cock * Two 1/8 in. BSP to 1/4 in. NPT fittings * Three 1/4 in. compression fittings * 5-piece 1/4 in. NPT plugs kit * 6-port billet manifold with mounting bracket (1/4 in.) * Two 15 ft. 1/4 in. air lines * Electrical connections
Not Yet Reviewed
$919.50
ISC Suspension N1 V2 coilover systems are the optimum suspension tools for improved handling of your street, track, or drift car. Capable of controlling some of the most aggressive driving, these adjustable coilovers will also greatly improve the look of your vehicle. They feature: 32-way adjustable rebound damping, full height adjustability, single cylinder monotube piston rod design, rubber or pillow ball upper mounts, front camber plates (on most models), and all the needed tools to adjust your ride height and stance. Plus, the kits offer multiple valving options—including Street Comfort, Street Sport, and Track Race. N1 V2 coilovers are 100 percent rebuildable and backed by ISC's limited lifetime warranty. Order the model recommended for your vehicle application. New ISC N1 V2 coilover upgrades: * V2 thrust bearings: Redesigned thrust bearings now included on all N1 configurations that come with camber plates. The all-new V2 thrust bearings feature a lower stack height and sealed self-lubricated Japanese Koyo bearings, making them virtually maintenance-free * V2 adjustable end links: When applicable, the N1 V2 and V2 Basic kits include updated adjustable end links (check application guide to determine adjustable end link eligibility) * Spring perch isolator pads: Revised hardened spring perch isolator pads reduce friction, allowing for more efficient preload adjustment and a longer product lifespan * Other new features: Copper-based anti-seize lubricant now included for coilover setup/installation
( 2 )
$1,199.00
RideTech 1965-72 Ford complete bolt-on coilover suspension systems deliver the best handling for your classic truck—in a package that you can install yourself with hand tools and a little elbow grease. 1965-1979 FRONT SUSPENSION: * Removes bulky, heavy, poor handling twin I-beam suspension * Bolt-in cradle strengthens the front of the truck while providing structural mounts for front control arms; utilizes substantial "H" style design compared to other "I" style crossmembers. * Superb suspension geometry, built without compromise, vastly superior to adapted salvage yard "Crown-Vic suspension swaps" or "street rod style" / Mustang II front systems with optimized roll centers and anti-dive. * Delrin© bushings on upper and lower control arms provide smooth, squeak-free long life * Upper control arm cross-shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Utilizes RideTech tall "pin" spindle, which uses "AFX brake kits." Many brake kits (including Wilwood) are dual drilled for 5 x 4.5 in. or 5 x 4.75. lug pattern * Optional "Hub" spindles offer the same geometry improvements as the pin spindles but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Brake kit for the stock 5 x 5.5″ lug pattern with Ridetech pin spindle are available as well * Increased camber gain with tall spindle, 5-8 degrees caster for improved high-speed stability * 63.5 in. in front width (wheel mount surface to wheel mount surface); provides options for "traditional" offset wheel choices (4 in. narrower than Crown Vic) * Fits 14 in. and larger wheels. If using more than 4.5 in. of backspacing, 18 in. wheels are required * Motor mount "loops" connect cradle to frame rails to reinforce frame * Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block * Front sway bar measures 1.5 in. x .250 wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center to center bushing mounts for 1979-93 Mustang-style steering rack * Includes billet adjustable tie rods * Bump steer has been virtually eliminated * Adaptable to stock steering column using kit 12319505; includes column adapter, U-Joint and shaft. * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from the front of the truck Rear 4-LINK SUSPENSION: * Removes factory leaf spring suspension and bracketry * Complete parallel 4-link with panhard and C-notches * Works with coilover or Shockwave air suspension * Includes R-Joints on all links for smooth, bind-free, quiet operation and long life * Optimized roll center and anti-squat (60 percent anti-dive) for amazing traction and elimination of wheel hop * High-quality satin black powdercoat finish * Reduces rear weight by 50 lbs. * 1965-1972: No bed modification needed * 1973-1979: Slight bed support rail modification needed (not visible from the top side of the truck * Compatible with short bed and long bed trucks * Adjustable coilover suspension system
Not Yet Reviewed
$8,610.00
RideTech 1965-72 Ford air suspension systems enable you to achieve that ultra-low show stance while providing excellent ride quality and handling. The older classic Ford trucks were designed and built for a different era—back when the speed limit was 55 and trucks were meant to work hard. While the original twin I-beam front suspension was built "Ford tough" it wasn't exactly built to carve corners. So, RideTech set out to design the best handling classic Ford suspension for the 1965-72 Ford trucks—and build it in a package that you can install yourself with hand tools and a little elbow grease. These RideTech Ford air suspension packages feature matched components to upgrade the performance of your old Ford for ride quality and handling with adjustable vehicle height. Complete systems vary by application and use and may include tubular a-arms, 4-links, coilovers, Shockwaves, air springs, shock absorbers, coil springs, leaf springs, sway bars, bushings, ball joints and more. Choose the Ford air suspension system recommended for your year/make/model.
Not Yet Reviewed
$8,800.00
BD Diesel traction bar kits are designed to modify, enhance, and optimize your truck's performance and handling. Each kit features a heavy-duty construction to help prevent wheel hop, axle wrap, and large angle on U-joints. BD Diesel traction bars are optimized to arc in the same path the axle travels during suspension movement, which makes for a smooth ride and the ability to tow without having to adjust the bars. Each kit comes with necessary hardware and rivet-nut specific drill bit and tool.
Not Yet Reviewed
$879.95
QA1 MOD Series coilover conversion systems put the ability to re-valve your shocks—on your car—into the palm of your hand. These innovative shocks feature QuickTune Technology, an industry-first that provides the ability to adapt to any track, any conditions, any time. The technology consists of interchangeable, dry modular valve pack assemblies, that can be thought of as dozens of finely tuned shocks you can hold in the palm of your hand. They define the valving curve of the shocks, and can be changed without interrupting the oil pathways. Simply unscrew from the shock, bolt-in another one with a new pre-determined valving range—and you're ready to go. There's no mess, no contamination, no air intrusion, and no downtime waiting on someone to re-valve your shocks. Ideal for Circle Track and Street/Strip applications, the shocks are available in a variety of extended and collapsed length models to best fit your vehicle. You get everything you need with these QA1 Rear MOD systems, from shocks to nuts and bolts, complete installation instructions, and even decals! Additional benefits and features of QA1 MOD Series shocks: * All new design delivers force, control, and unmatched tenability * Hard anodized aluminum bodies with PTFE—durable, non-galling surface * Double-adjustable shocks with low-speed bleed adjustments * Large solid piston (with blow-off valve)—improved driver feel and control with up to 1,600 lb. force * High-speed valving adjustment (coarse adjustment)—relates to shock operation during impact events, like hitting a pothole or curb * 24 clicks/settings—wider range of adjustment than comparable shocks * Indexable base eyelet—multiple mounting position to optimize knob access and provide more mounting flexibility * Low-speed valving (fine-tune adjustments)—adjusts ride quality and weight transfer on corner entry/exit; more bleed for softer feel and less bleed for stiffer feel * Piggyback or remote canister options * Unique spring adjuster nut and tool * Thrust bearings included * Superior thermal performance, as oil is in constant contact with outer body * One base shock can be upgraded over time to keep up with increased performance levels of your vehicle
Not Yet Reviewed
$2,068.95
—
$2,217.95
Rough Country offers M1R reservoir loaded struts for a variety of applications, including many Ford Broncos from 2021 and up. They will improve stance, balance, and handling. If you want to improve your vehicle's on-road performance and off-road capabilities, M1R struts are an excellent choice. They help stabilize your vehicle's movements, enhancing control when you turn, brake, accelerate, or ride over uneven road surfaces. As an adjustable ride height strut, these M1R's keep your suspension from overextending, providing a more consistent ride. Made for rugged off-road performance, M1R struts have a 2 in. digressive piston for a more stable ride, preserving the smooth ride quality you need. M1R loaded struts are engineered to give you the most reliable performance, increased driving comfort, and all-around performance for your vehicle. They're made from 2 in. seamless extruded tubing and feature durable vulcanized natural rubber bushings. They are also powdercoated silver for resistance against the elements and adjustable in height. Utilizing multiple grooves in the strut body, the spring perch can be raised or lowered. So whether you're looking to add a little extra clearance for off-roading or just want your ride to sit a little higher, M1R monotube reservoir struts are the perfect solution. Product details: * Ride height adjustable * Monotube strut with external reservoir contains internal floating piston * Increases travel * Dissipates heat faster * 2 in. seamless extruded tube * 2 in. digressive piston * Self-adjusting, deflective-disc independent rebound, and compression * 16mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm monotube design ensures consistent, fade-free performance in all conditions * Digressive valving instantly reacts to changing surface conditions * Powdercoated silver for resistance against harsh elements * Available in various lift heights for multiple applications * Durable vulcanized natural rubber bushings * Bolt-on installation requires just basic tools and about 2-3 hours to complete
Not Yet Reviewed
$499.95
—
$749.95
Whether it's to turn heads, sling mud on a path less traveled, or simply to get extra clearance for those bigger tires, Rough Country M1 suspension lift kits offer amazing off-road performance at an incredible value. They are easy to install, and each kit includes the specific heavy-duty components and hardware needed for your truck's lift, plus Rough Country M1 shocks. Select the kit designed for your truck with the lift desired. M1 shock features: * 2 in. seamless extruded tube * 46mm digressive piston * Self-adjusting, deflective-disc independent rebound and compression * 18mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm monotube design ensures consistent, fade-free performance in all conditions * Digressive valving instantly reacts to changing surface conditions * Zinc plated for resistance against harsh elements * Durable vulcanized natural rubber bushings
( 1 )
$1,139.95
—
$1,269.95
Rough Country V2 suspension lift kits offer your vehicle a more commanding presence with a more aggressive stance and a smooth factory-like ride. These suspension kits provide everything needed to lift your vehicle, giving you increased ground clearance to run larger tires while reducing the nose-down factory look. The kits feature Rough Country's V2 monotube shocks delivering incredible ride quality and performance. Choose the lift kit designed for your vehicle. V2 shock features: * Monotube design * Internal floating piston * Nitrogen-charged * 46mm high-flow piston * Fast heat dissipation * 36kN tensile strength * Mounts inverted * T6061 brushed aluminum body * 3-year Manufacturer's Warranty
( 1 )
$1,319.95
Upgrade the suspension of your Jeep, truck, or SUV with BDS Glide-Ride front and rear leaf springs. They offer improved handling through any conditions and provide added lift height over stock springs, making them perfect for hitting the trails, towing a heavy load, or just daily driving. Built to outperform, BDS Suspension Glide-Ride leaf springs have a multi-leaf progressive spring rate that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design and anti-friction pads. Adding BDS Glide-Ride leaf springs to your vehicle will reduce axle wrap and provide flexibility throughout the suspension cycle. Choose the set designed for your vehicle. Note: Bushings are required and must be purchased separately.
( 5 )
$205.95
Up the ante in your truck with the style and performance of BDS Suspension Fox 2.5 Elite coilover lift kits. Designed to improve stance, performance, and capability, kits include everything necessary to set your truck up right with clearance for big tires. Fox 2.5 Elite coilovers include a Dual Speed Compression (DSC) adjuster that allows easy high-speed and low-speed compression tuning for optimal performance in any terrain. Each kit will also include Fox performance rear shocks available in different options, heavy-duty control arms for increased suspension travel, and other matched components to take your truck to the next level. Select the kit designed for your truck.
Not Yet Reviewed
$4,738.65
—
$6,259.65
BDS Suspension long arm kits maximize the capabilities of your truck or Jeep by upgrading the standard control arms to long arms, adding a pair of Pro-Ride coil springs, and allowing you to choose between several different shock options. The kits improve your vehicle's stance and include everything necessary to set your truck up right with clearance for larger tires. Select the kit designed for your vehicle. Key kit component features: * Long arms add strength, improve handling, and they take off-road articulation to the next level. The arms are formed for maximum tire clearance and stability. * Pro-Ride coil springs are supplied to provide the correct lift height and a smooth, predictable ride across various terrains. Manufactured from high-tensile steel, they are direct OE replacements engineered with the properly sized wire diameter, resulting in maximum reliability without premature coil bind. * Some kits will have BDS Glide-Ride leaf springs as the rear lift option—a multi-leaf progressive design for a smooth ride that reduces axle wrap and creates a more controlled and stable feel. * Shock options include Fox 2.5 Performance Elite (FPE), Fox 2.0 Performance Series (FS), and NX2 Nitro Series (H).
Not Yet Reviewed
$6,236.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
