Availability
Showing In Stock Items. Show All 99 Items.
VIAIR's Continuous Duty onboard air systems are a compressed air solution for inflating off-road tires (up to 37 in.), as well as powering up a variety of pneumatic applications. These systems feature one of the most popular "C" model compressors, the 485C Gen II. The upgraded duty cycle of 100 percent at 200 psi and the larger head port size of 3/8 in. NPT allow for faster fill rates, along with increased airflow to your applications. With the VIAIR Continuous Duty onboard air system, you can easily air up off-road tires and other power pneumatic applications like air horns, air lockers, load leveling and more! Air systems feature: * 485C Stealth black air compressor * 2.5 gallon air tank * 30 ft. coil hose * Digital tire inflation gun with 180 psi gauge * 1/4 in. NPT female thread quick-connect stud * 1/4 in. NPT male thread quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch with relay * 1/8 in. NPT female thread to 1/4 in. NPT male thread reducer * 1/4 in. NPT 250 psi safety valve * 1/4 in. NPT drain valve * 1/4 in. NPT compression fittings * 20 ft. of 12-gauge wire with an inline fuse holder * Electrical connectors * IP67 ingress protection rating
( 3 )
$580.81
Instant Rebate
Maxtrac Suspension lift spindles are a cost-effective way to lift your rear wheel drive truck without breaking the budget. They are designed by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. Some spindles come with extended, DOT compliant, stainless steel braided brake lines. Order the lift spindle suited to fit your application. Features and benefits include: * Maintains factory ride quality * Includes all necessary hardware * Easy bolt-on installation * Available for several applications
( 2 )
$570.62
—
$674.29
Air Lift air compressors are designed for use with their Load Controller II systems. If you're looking for replacement compressors for your system, they provide the power that you need to inflate your air lines.
Not Yet Reviewed
$514.99
VIAIR 450C Series air compressors feature an oil-less design, a high performance PTFE piston gear, and a gearless direct-drive motor. They are moisture and dust-resistant with an anodized aluminum alloy cylinder. These compressors also feature an automatic-reset thermal overload protector, mounting plates with vibration isolators, and stainless steel braided leader hose. The inlet filter is remote mountable and they also have an inline check valve.
( 2 )
$516.95
Skyjacker suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They'll help you get the right height, clearance, and attitude for your truck or Jeep—while maintaining a "factory" ride quality and improving handling. Standard Flex, Value Flex, Rock Ready, Single Flex, and Double Flex versions are available, depending on your application. The lift kits come with all of the necessary mounting hardware and detailed instructions, and they're available for 2WD or 4WD vehicles.
( 69 )
$596.93
—
$740.68
Kleinn heavy-duty onboard air systems are offered in both 12 V and 24 V versions. They can power your air horns and other accessories, as well as air bags and small air tools. These systems include a 3-gallon air tank, 150 psi compressor, and a quick-connect tire inflation kit. The compressors are sealed against the elements and the steel tanks are internally coated with Cortec and epoxy coated on the outside for lasting corrosion resistance that works as good as it looks. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order Kleinn heavy-duty onboard air systems. More product features, items, and specifications include: * Compressor with 100 percent duty cycle and check valves (6350RC; 150 psi) * Permanent magnetic motor on 24 V system * Maximum pressure – 150 psi * Rating for cfm at 0 psi – 1.17 (6350) and 1.98 (6354) * Amp draw – 21 (6350) and 12 (6354) * Thermal protection * Black epoxy steel air tank (3-gallon; 21 in. long x 8 in. wide x 10 in. tall) * Pressure switch settings - 110/145 psi (on/off) * Safety valve - 175 psi * Drain cock (1/4 in.-NPT) * Compression fitting (1/4 in. NPT) * Intake "Snorkel System" with remote-mount filter * Mounting brackets and hardware * Quick-connect tire inflation kit with 30 ft. coil hose, tire chuck, and storage case
Not Yet Reviewed
$529.95
Air Lift WirelessONE 2nd generation control systems put the power in your hands—literally! And the redesigned systems are easier than ever to install! Systems are available with or without EZ Mount installation brackets. Inflate or deflate your air spring system with one touch of Air Lift WirelessONE 2nd generation control systems. NEW!: Air Lift is now offering the same trusted WirelessAIR kit to customers without a hand-held controller. The 73000EZ system utilizes a free smartphone app for wireless control. This new option will allow you to order and receive WirelessAIR kits with all the same functionality and less wait time. Air Lift WirelessONE 2nd generation control systems feature: * Single-path control: Left and right air springs are inflated/deflated equally * Wireless hand-held unit and new mobile app for convenient operation inside or outside your vehicle. Kits are also available without a hand-held controller—utilizing a free smartphone app instead for wireless control * Easy installation—no air lines to the cab * Three programmable, user-defined memory settings
( 28 )
$525.95
—
$675.95
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$659.95
Designed for the pro-touring GM enthusiasts, QA1 GM 2.0 pro-touring control arms are a simple upgrade over original suspension or worn and outdated tubular control arms. The pro-touring arms are also for those wanting to improve their overall handling, ride quality, and vehicle stance. These arms will improve suspension geometry over the factory configuration and pave the way for planning additional upgrades. The high-strength, low alloy steel enables optimized thinner wall construction and results in overall lighter weight. The increased positive caster design improves straight line stability. Pro-touring arms also feature QA1's stronger, low maintenance, and rebuildable ball joints which feature integrated dust boots. Note: These control arms are not compatible with OE-type springs, a coilover system must be installed. QA1's arms will accept factory type sway bars and include upper and lower bump stops.
( 16 )
$738.00
—
$739.95
AFCO Racing Big Gun drag shocks put your power to the track. Specifically designed for big cubic inch, high-power engines, these twin-tube lightweight aluminum Big Gun shocks provide ultimate control off the line. They feature a new internal design, a low-friction rod guide, and a black, hard coated shaft for low-friction operation. Plus, they're double-adjustable, so you can independently adjust the rebound and compression with no bleed-over. Mount the shocks upside-down for easier access to the rebound adjuster. And their shim stack design makes them owner-rebuildable, revalveable, and serviceable. Add the ultimate shocks for superior launch control and performance--pull out the Big Guns from AFCO.
( 5 )
$539.99
—
$549.99
RideTech has upgraded the traditional notion of sway bars with their MuscleBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MusceBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions
( 24 )
$525.00
—
$595.00
Air Lift LoadLifter 5000 Ultimate air spring kits feature an internal jounce bumper for maximum ride comfort. They use 2-ply reinforced commercial-grade bellows, which mount between the spring and frame and can be inflated from 5 to 100 psi—to level loads up to 5,000 lbs. on large pickups and vans, wreckers, ambulances, motorhomes, and commercial trucks. LoadLifter 5000 Ultimate kits include bellows, jounce bumpers, air lines, fittings, brackets, mounting hardware, and instructions. They're engineered for installation in about two hours. Order the kit designed for your make and model vehicle.
( 158 )
$504.99
—
$646.99
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1971-87 Chevy/GMC truck lower control arms come with rubber bushings, cross shafts, and ball joints pre-installed. They are manufactured from steel and powdercoated black for a stock appearance. Restore your classic's suspension with OER Authorized control arms.
( 1 )
$540.99
Upgrade from stamped steel and rubber bushings with QA1 tubular control arms. Stronger and lighter, they are constructed of tubular steel, powdercoated, and fitted with polyurethane bushings. Their upper control arms will increase caster by approximately 3 degrees for better straight line stability and include ball joints. The lower control arms feature sway bar tabs and include bushings, pivot arms, and nuts for a no-hassle install. Improve the performance of your muscle car with QA1 tubular control arms.
( 1 )
$549.95
—
$609.95
Summit Racing™ coilover shock and spring Pro Packs help you replace your OEM rear suspension and enable your race car to be more consistent on starting line launches. These kits include a pair of adjustable coilover shocks and a pair of silver powdercoated coilover springs. They're available with a variety of spring rates that you can match to the specific rear weight of your vehicle. Stop wasting precious time on the starting line—order the Pro Pack with performance options best suited for your application.
( 11 )
$525.88
—
$733.86
If your show car or off-road machine is in need of some high-quality air compressors, then these VIAIR 480C Dual Performance Value Pack air systems are just what you need. These 12 V air systems are designed to fill air tanks with volumes of up to 10 gallons and feature a 165 psi cut-on/200 psi cut-off pressure switch. Available in your choice of pewter or chrome, these VIAIR 480C Dual Performance Value Pack air systems are sure to keep up with your vehicle's air needs--on or off-road. Air systems include: * Two 480C compressors * 2 air filter assemblies * 2 remote mount brackets * 4 remote mount fittings * 4 spare air filter elements * 2 leader hose clips * 6 air line clips * Hardware kit with nuts, bolts, and lockwashers * 2 heavy-duty 40 amp relays * Heavy-duty tube-style fuse holder * Heavy-duty pressure switch
( 3 )
$503.40
Say goodbye to leaving the line sideways with UMI's rear drag sway bars. These kits are designed to get your vehicle consistently leaving the line straight, eliminate torque steer, and drastically improve 60 ft. times. The included adjustable end links allow vehicle preload to be set for straight launches. UMI's end links feature heavy-duty chromoly rod ends, which have a hard chrome plating and a PTFE self-lubricating race. The end links attach to the drag bars using 5/8 in. Grade 8 bolts and locknuts. These heavy-duty rear drag bars attach to the axle tubes using high-strength 4140 chromoly U-bolts, 3/16 in. thick fabricated mounts, and Energy Suspension bushings. The fabricated bushing mounts feature CNC-machined teeth to prevent sliding on the axle. Unlike some competitors' designs, UMI's sway bar mounts also feature gussets welded on each end to prevent the brackets from spreading while tightening.
( 5 )
$529.99
The Firestone 2626 Air Command Kit with app will allow you to remotely fill your Firestone Ride-Rite or RED Label air bag helper springs. Each kit features a Bluetooth controller that's operated by phone via an app and will automatically update the firmwear. A heavy-duty compressor is included, as well as 1/4 in. air line, fittings, and installation hardware. Product features: * Bluetooth enabled * Built-in self-diagnostics * "Mount anywhere" on-board vehicle air compressor * Manual inflation option available * Automatic ECU firmware updates * Two wire hook-up for easier installation * Compatible with most air spring kits with 1/4 in. air line * Monitors components and voltage to ensure proper wiring * Easily adjust air pressure up to 150 psi with convenient app * Use with the 5,000 lbs. Ride-Rite kits and the 7,500 lbs. RED Label kits
( 1 )
$593.83
—
$716.63
ReadyLift Suspension coil spring front lift kits give you an excellent alternative for lifting the front of your truck. These new lift systems are designed to raise the front of your truck an impressive 2 1/2 in., allowing you to fit those massive 35 in. tires you've always wanted, all while maintaining great handling performance and increasing ground clearance. Their key to success is a combination of specially engineered progressive wound coil springs paired with Fox 2.0 Series performance shocks, in addition to model-specific brake line extension brackets, bump stop extension brackets, and front sway bar frame mount extension brackets. ReadyLift Suspension coil spring front lift kits aren't just leveling kits. They're high performance packages that will increase strength and reliability and improve your overall ride and handling!
Not Yet Reviewed
$739.95
A major common weak point on Chevrolet/GM HD series trucks is the steering linkage and tie rods—with high-torque engines, lift kits, and larger tires putting greater strains on the steering system than what OEM intended. Common failures include loose steering, front wheels toe-in under load while in 4WD, and broken tie rods. If you have performance upgrades in your truck, lifted it or do serious towing, it's time for a steering upgrade kit from BD Diesel. In kit P/N 1032150, the forged I-Beam centerlink is 30 percent stronger than OEM, which reduces flex in the steering system and creates a strong base for the tie rods to be attached to. The tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force that OEM rods can handle. Greaseable ball joints come with sintered bearings and allow for better load holding and increased life. Longer, high-strength through-bolt designed sway bar end links are included to accommodate larger tie rods and leveling kits. Polyurethane bushings have OEM-style shaping for articulation and durability. The entire kit retains factory geometry for accurate steering and will allow for any OEM replacement parts to drop-in without any geometry sacrifice or modification required. Other upgrade kit designs change the geometry of the steering, which can sacrifice safety and drivability for straight line strength while pulling or racing. This can also create a dangerous "bump steer" where the vehicle becomes uncontrollable on uneven roads. By not altering the steering geometry, the BD upgrade kit saves you from this problem. The total package is an economic upgrade for worn-out steering and will increase the durability, longevity, and dependability of your truck—while saving money by preventing catastrophic repairs. See if there's a steering upgrade kit that's compatible with your vehicle.
Not Yet Reviewed
$525.95
On Sale
For safer load carrying, Rough Country air spring modular kits keep your ride level when towing with their durable powdercoated steel mounting brackets and double-convoluted air bags. They can be used on stock height vehicles (the included spacers and related hardware won't be used) as well as lifted models. The air bags feature an internal bump stop and installation is simplified with the push-to-connect air fittings. Versions include those with and those without an onboard air compressor, plus complete kits with a wireless remote system. Transform your vehicle into a legend with an assist from the Rough Country air spring kit best suited for your application. More product features and items include: * Optional onboard air compressor kits and wireless remote systems can be added later * DOT-approved air line * Fittings (90-degree) * (2) Air bags (5-100 psi minimum-maximum) * Inflation valves (manual Schrader) can be hidden inside fuel door or used as license plate hold-downs * U-bolt plates * Block shims * Hardware kit with detailed instructions that include a BOM (Bill of Material) and torque specifications * Some kits will include headlight frame and air bag brackets (application dependent) * This product will not increase any vehicle's towing capacity
Not Yet Reviewed
$569.95
—
$719.95
On Sale
Over the years, Superlift has established a reputation as the "go-to" source for suspension components. Superlift suspension lift kits are designed and built by real off-road enthusiasts, so you know they're complete and super-strong. Properly addressing things that are generally ignored by others, yet matter—it all adds up. Superlift suspension lift kits are available in a variety of lift heights and styles to fit your budget and needs. Depending on the application, Superlift suspension lift kits may feature: * Steering knuckles, crossmembers, torsion bar brackets, bump stops, belly pan, brake line brackets, and front sway bar links * Upper and lower control arm drop brackets, center link, rear shocks, rear blocks, and U-bolt kit * All hardware specific to the application * Custom-designed, engine-specific spring rates and shock valving * Ideal caster settings * Suspension compression travel control * Correct track bar/pitman arm phasing * Designed using original equipment CAD data for accuracy * Compatible with OE stability control and anti-skid control * No problem codes or irritating dash lights * Makes room for up to 37 in. tires (varies by make and model) * Maximum ground clearance * Maintains awesome ride quality and handling characteristics * Aligns to OEM specifications * Corrects front-to-rear factory rake for a level stance * Detailed instruction manual suitable for do-it-yourself or professional installation
( 51 )
$689.99
—
$849.99
$586.49
—
$722.49
AFCO Racing Eliminator BNC valving shocks are designed to eliminate bounce after a grueling launch off the line. Their smooth ultra-low friction rod guide and lightweight aluminum construction help dissipate heat. There are 32 clicks of adjustment afforded to rebound settings through a shaft-mounted knob, and to compression via a body-mounted knob. For better impact absorption after a wheel stand, install AFCO Racing Eliminator BNC valving shocks. Select the model suited to fit your racing application needs.
( 1 )
$502.99
—
$514.99
On Sale
RSO Suspension sway bar kits provides balanced performance of front and rear suspension for rugged off-road conditions. The sway bar kits are a direct replacement for the stock sway bar ensuring quality fit and finish and comes with all components required for installation. They are constructed of SAE 4130 heat-treated steel and powdercoated alloy steel arms for maximum strength, which is the same quality features found in professional off-road competition sway bars. This includes the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, Delron bushings, semi-gloss black powdercoated arms, and adjustable length heim jointed sway bar links. Order the kit designed for your make/model. Product features and details: * Vehicle-specific fitment to ensure that the part is right for your vehicle and all components needed for installation—modifications may be required * Constructed of SAE 4130 heat-treated steel for maximum strength * Rear sway bar kit includes heavy-duty stainless steel braided brake lines for added suspension travel * Features steel arms and includes all components for installation: sway bar, powdercoated bolt-on steel frame brackets, performance bushings, powdercoated arms, adjustable sway bar links * Provides increased traction and no need to disconnect for off-road use * Powdercoated bolt-on frame brackets and arms, zinc plated adjustable end links and high-quality Delron bushings for longevity in the harshest terrain * Backed by a limited lifetime manufacturer warranty on the workmanship/structure, 5-years on the components, and 1-year on the finish/coating
( 2 )
$624.99
$562.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
