Availability
Showing In Stock Items. Show All 85 Items.
Allstar Performance top link spacer kits include two adjustable spacers to place on each side of your top link, pull bar, or third link. These aluminum replacements feature a threaded body that may be adjusted as needed to locate the top suspension link between mounting brackets. Spacers are designed for 0.750 in. hardware and adjust from 1.750 in. to 2.500 in. wide.
Not Yet Reviewed
$114.99
On Sale
Lakewood combined their experience and the latest technology in drag racing to develop shocks and struts that are superior to all other drag shocks and struts available. They provide the correct weight transfer on the initial launch and then bring the front-end down quickly for aerodynamic purposes. This transfer will result in lower ETs and keep the rear-end loaded for maximum traction.
( 120 )
$105.95
Old Man Emu Dakar leaf springs are offered in numerous spring options to suit a multitude of applications, allowing you to set your vehicle up for recreational or commercial purposes. Feature packed, a set of Emu Dakar leaf springs matched to a set of Old Man Emu shocks will deliver a vastly improved ride, handling and load carrying capability to your vehicle. Emu Dakar leaf springs typically feature: * Draw-tapered and diamond-cut leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life * Bolt clamps and liners: The leaf clamps are bolted to allow installation of anti-squeak nylon liners * Fully scragged and load-tested: Scragging ensures the spring takes a permanent "set" which reduces the risk of sagging. Load testing ensures the spring meets the required specification. * Graphite coating: To further reduce the friction between the spring leaves and friction pads. * Military wrap: Designed to provide added safety (not available on all applications) * Anti-friction pads: Re-greaseable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest * Flat axle seat area: Allows a positive, safe axle mount reducing spring stress and increasing spring life * Shot peening: The tension side of all leaves is shot peened to reduce spring stress, process can also double the life of a spring * Two-stage leaf pack: Featured on most rear springs for optimum comfort. When unladen, the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added
( 11 )
$149.95
—
$229.95
Steer Smarts YETI XD track bar relocation brackets are designed to correct the geometry of the track bar on Jeeps that are equipped with a top-mounted draglink. These easy bolt-on solutions will ensure that the track bar and top-mounted dragline are properly aligned and aid in the reduction of bump steer. Street Smarts YETI XD track bar relocation brackets are fabricated from 1/4 in. thick steel and e-coated for maximum durability. They include all necessary hardware and installation takes just minutes with basic hand tools.
Not Yet Reviewed
$159.00
—
$169.00
Unity Automotive complete strut assemblies include all the components required for a strut replacement in a single, fully-assembled unit. All the parts feature OE design, and they're pre-assembled—a breakthrough that saves on installation time by eliminating the safety hazards associated with coil spring decompression. Every assembly features application-engineered valves to optimize each vehicle's unique ride and handling characteristics. Exceed your original equipment standards with the Unity Automotive complete strut assembly designed to fit your application.
( 46 )
$100.99
—
$266.98
Refresh the handling of your truck or SUV with a pair of BDS gas struts designed for use with BDS lift kits. These struts are designed to filter out harshness, noise, and vibration. They are tuned specifically to each vehicle with rod-displaced valving that adjusts to variable road conditions for a smooth and consistent ride. All-weather fluid with special additives helps reduce oil breakdown in extreme temperatures, and the nitrogen gas charge reduces aeration to maintain better tire contact. Get your 4x4 suspension components from the company with the mission of making things right with no excuses when you order the BDS Suspension gas struts specifically designed for your application. More product features include: * PTFE-banded piston provides consistent sealing for increased durability and better control * Chrome-plated piston, bronze-reinforced rod guide bearing, and special single lip seal contribute to longer service intervals * Shaft size is 18mm diameter * Also available individually (look for the same part number with an "S" at the end)
Not Yet Reviewed
$264.95
Currie heavy-duty spring plates are built to withstand the most rugged off-road abuse. They have a built-on skid plate to protect the U-bolts. The top plate is 5/16 in. steel and the bottom skid plate is stamped out of 1/4 in. steel. These universal spring plates from Currie are designed to be used with a 2 in. wide spring and come with bolt-on, replaceable shock mounts.
( 24 )
$138.00
AGX adjustable gas shocks and struts are built with the advanced engineering and quality that you would expect from KYB. The AGXs have velocity-sensitive valving that gives you a comfortable ride under gentle driving conditions, and yet automatically gets firmer as the driving gets more serious. These shocks let you tune the damping for your driving conditions without having to lift the vehicle or remove anything to change the settings. You select the damping rate simply by turning an external knob on the body of the shock, or via a screwdriver slot on the top of the piston rod, depending upon the make and model of the vehicle.
( 66 )
$100.53
—
$183.66
Superlift performance lift leaf springs are tailored to your specific application, for the performance you're looking for in a lifted vehicle. These leaf springs provide quality materials and top performance from a company you know and trust.
( 14 )
$129.99
—
$249.99
Pete and Jake's Shortie shocks are specifically engineered for functional use on hot rods designed to have shorter suspension travel or limited mounting options. These monotube shock absorbers are available in painted or chrome finishes. They feature black rubber bushings in both the upper and lower mounting eyelets, with a 7/16 in. top sleeve and a 5/8 in. bottom sleeve. Order a pair of Pete and Jake's Shortie shocks to help complete the polished look of your vintage-style hot rod.
( 8 )
$173.99
Eibach coilover springs are among the finest in the world and used by top race teams from F1 to WRC, and Le Mans to NASCAR. When other springs sag or need frequent replacement—these teams inevitably turn to Eibach. Producing springs with unparalleled precision and repeatability, Eibach uses the world's finest Hi-Ten spring steel, exceedingly precise tolerances, and state-of-the-art technology in every step of the manufacturing process. The coilovers are available in hundreds of sizes, spring rates, and other options. . Product features: * Ultra-lightweight for reduced unsprung mass * Maximum travel, in combination with smallest block heights * Exceptional block resistance and durability * Precision parallel and square end configurations under unloaded and loaded conditions * Lowest side loads with load center ideally located relative to spring axis * Precision tolerances—the tightest in the industry * Highest linearity and rate consistency * Each spring individually tested and rated
( 90 )
$107.00
—
$221.00
Pete and Jake's rod shocks are specifically designed for functional use on hot rods. These monotube shock absorbers are available in painted or chrome finishes. They feature black rubber bushings in both the upper and lower mounting eyelets, with a 7/16 in. top sleeve and a 5/8 in. bottom sleeve. Order a pair of Pete and Jake's rod shocks to help complete the polished look of your vintage-style hot rod.
( 13 )
$181.99
Bilstein B4 OE replacement shocks and struts are perfect for restoring the smooth ride you've been missing in your car or truck. Bilstein has spent years developing innovative shock absorbers for the world's top auto manufacturers, and all of their expertise has been wrapped into these B4 OE Replacement Series shocks and struts. Utilizing both twin-tube and monotube technology, these shocks provide an OEM-quality ride at an economical price. Don't settle for a bouncy, uncomfortable ride when you can bring your suspension back to life with Bilstein B4 OE replacment shocks and struts. Hundreds of models are available for fitment on countless vehicles, such as Volvo, Jaguar, Mercedes-Benz, Mazda, VW, Hyundai, Audi, BMW, Land Rover, Toyota, and more!
( 93 )
$105.00
—
$274.00
SuperSprings SumoSprings enhance your suspension. They increase comfort, level sag, reduce sway, protect cargo, and save money with maintenance-free performance. SumoSprings are manufactured from proprietary closed micro-cellular urethane that captures air inside millions of air pockets, providing a smooth and progressive spring rate, and will not leak and never requires airlines or compressors. SumoSprings are available in a variety of heights, diameters, and densities to support multiple front and rear applications. SumoSprings available densities and styles: * Blue urethane is -40 density--captures more air in the millions of micro-cellular bubbles, creating an air spring suitable for light and medium duty applications. * Black urethane is -47 density--balances the amount of urethane and air bubbles to create an air spring suitable for light, medium, and heavy duty applications. * Yellow urethane is -54 density--traps a smaller amount of air in the air spaces creating a stronger air spring suitable for medium and heavy duty applications. * Solo--One-piece units attached on one side used as a replacement/upgrade to factory bump stops * Maxim--One-piece units attached on top and bottom allows up to 50 percent expansion of original body height * Rebel--2-piece units attached on top and bottom using separate male and female pieces allows unlimited travel
( 43 )
$253.99
—
$267.99
Hyperco Hypercoil coilover springs are trusted by top race teams and chassis manufacturers who insist on using the best quality products available. Each Hypercoil spring is built to deliver the best in performance—by utilizing cutting-edge design concepts like Optimum Body Diameter. OBD adjusts the body diameter of the spring relative to the end coils to provide more deflection and help resist bowing. This design achieves a consistent spring rate and better performance, giving you the edge that you want. It doesn't matter if you're running Circle Track, dragstrip, off-road racing, or just setting up your own street machine, you can't go wrong with Hypercoils. Order the diameter, length, and spring rate best suited for your application.
( 44 )
$101.49
—
$193.00
Warrior Products leaf spring shims correct the pinion and/or caster angles in your leaf sprung vehicle. Their heavy-duty, high-quality steel construction helps to keep the shims from breaking under heavy load conditions, while resisting falling out, breaking, or spinning out of place. Features and benefits include: * Designed to be permanently attached to the leaf spring pack using the leaf's center-pin * The cross holes are counter-bored against the angled surface to ensure the center-pin gets even clamping force across the spread of the pin's top surface * Accepts 5/16 in. cross-pin (not included) * Easily drilled to fit larger pins * Available in 2, 4, 6, and 8 degree angles * Available in 2, 2.25, 2.5, and 3 in. widths
( 25 )
$121.99
ICON Vehicle Specific (VS) 2.0 Aluminum Series shock absorbers provide cost-effective upgrades specifically tailored by ICON engineers for your application. This shock series delivers a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on- and off-road performance. Like all ICON shock absorbers, Icon Vehicle Dynamics 2.0 VS IR Shocks are fully rebuildable and can be re-tuned with new valves. More product features include: * Nitrogen-charged monotube design with internal reservoir * One-piece linear/digressive piston design with vehicle-specific valving * Chrome plated hardened steel shaft (5/8 in. diameter) resists corrosion and pits * 6061 aluminum rod end, top cap, and internals ensure strength and durability * Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory-type fitment * 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance * Nitrile rubber top-out bumper for noise-free operation * May include premium grade 5WT shock oil for consistent suspension damping along a wide temperature range (application dependent)
( 2 )
$195.65
—
$200.80
Tuff Country sway bar end links are designed for those who want to upgrade their factory end links. They are simple to install and mount in existing holes. Heim joints are used on the top and bottom to allow for more flex and reduce binding. Tuff Country sway bar end links are great for off-roading or as replacements for broken or bent factory end links.
( 13 )
$108.99
—
$145.99
Providing additional control and easy to install, KYB Truck-Plus assemblies are an ideal solution for owners of modern 1/2 ton trucks looking to increase their handling capabilities. These units have all the same research and testing as their Strut-Plus assemblies, but with a high-pressure monotube strut designed for trucks. Available with either their popular Gas-a-Just monotube or their heavy-duty MonoMax (depending on application), KYB Truck-Plus assemblies are powerfully built for trucks that work, go off-road, tow a trailer, or haul heavy loads. Order the assembly designed to fit your specific application. Items and features: * Assembled with matching spring, top mount, and insulators * High-carbon steel springs that are heat-treated, stress-relieved, cycle-tested, and salt spray-tested * High-pressure monotube design separates gas and oil for fade-free operation and instant response * Ideal for larger, heavier tires and wheels * Shock valves designed to help restore steering response to OE specs * More stability than traditional twin-tube shocks for vehicles with a higher center of gravity
( 8 )
$159.78
—
$259.68
UMI Performance leaf spring front mounts are designed to replace your OE originals and bolt into the factory location for an easy installation. To improve instant center location, these leaf spring front mounts feature both a GM factory mounting location and a +3/4 in. raised location to change the anti-squat characteristics, known as the "Herb Adams mod." The mounts are ideal for a variety of Chevy and Pontiac muscle cars from the 1970s and '80s. Additional features: * Steel construction with powdercoat finish * Use of top mounting hole lowers rear of car approximately 3/8 in. as compared to stock location * Mounting hardware included * Race-proven performance
Not Yet Reviewed
$229.99
Low Range Off-Road complete contact axle pads provide more contact with the axle than other spring –over-axle pads to provide the strength needed for hardcore off-roading. They are laser cut from thick steel and CNC press bent for accuracy. The top of each axle pad is cut from a flat sheet, and allows a 100 percent flat surface for your spring, instead of the curved surface of some bent pads on the market. The pad surface is longer than OE pads to help with axle wrap issues that may come from narrower pads, ensuring maximum spring-to-pad surface area. Other features of Low Range Off-Road complete contact axle pads include: * 3/16 and 3/8 in. laser-cut steel construction * Fully TIG-welded for superior strength and looks * Laser-cut sides fully match the axle tube and original lower perch for complete contact * Each pad has multiple spring pin holes on the top to allow for suspension adjustments
Not Yet Reviewed
$143.45
Nolathane shock abosrber bushings are made of quality materials giving this brand a great reputation for durability and performance. Polyurethane shock bushings end the days of a harsh ride in your application, giving you a smooth, comfortable, and high performing ride. Upgrade to a top tier bushing and give your vehicle a better ride today!
Not Yet Reviewed
$109.87
Trail-Gear creeper joints can take years of punishment! The outer shell of these these joints is a single forged steel piece. The inner flex ball is 8620 tool steel, the washers are heavy-duty hardened steel, and the bushings are polyurethane. TG provides a threaded grease fitting on top and a drilled flex ball for better lubrication; plus, each joint includes a jam nut. Choose from the selection of Trail-Gear Creeper joints to build your flex suspension.
( 3 )
$129.99
Trail-Gear creeper joints are also available in a shackle mount for use with leaf springs. Using a creeper joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper joint shackle mounts are sold in pairs and do not include the shackles, bolts, or spring bushings. Three different flex ball dimensions (9/16 in., 5/8 in., and 18mm) enable you to choose the right size to match your application. Additional details: * The outer shell is a single forged piece * The inner flex ball is made from 8620 tool steel and rides on high-quality polyurethane bushings * Heavy-duty, hardened steel washers hold the joint together * Allows for up to 40 degrees of movement when used with spacers * A threaded grease fitting is provided on top for lubrication * The flex ball is drilled for cross-lubrication flow from the shell to the link mount bolt * Toyota Pickup and 4Runner use 18mm size
Not Yet Reviewed
$129.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
