Availability
Showing In Stock Items. Show All 84 Items.
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.
( 177 )
$657.99
—
$849.96
When an independent front suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding these Old Man Emu control arms brings the alignment cams back into an acceptable range for both caster and camber. Each control arm is carefully constructed to meet all VSB14 requirements. The ball joint housings and eyelets are made from forged steel for added strength. The ball joints are greasable and include protective caps to endure rough conditions, while also holding up long-term. All of this is coated in a durable black powdercoat finish that looks great and protects the control arms. Order the pair recommended for your vehicle application.
( 2 )
$679.95
Improve traction without limiting wheel travel with BDS Recoil traction bar kits, made with heavy wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They offer a full float design for bind-free performance and can be installed with a range of lift heights. BDS Recoil bars are fabricated from 2 in. O.D. x 3/16 in. wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut. Using a forged housing with large 1 1/4 in. x 12 threaded shank, a single sided snap ring, and a one-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. Choose the kit designed for your vehicle.
Not Yet Reviewed
$675.95
Air Lift WirelessAir 2nd generation on-board air compressor systems allow you to inflate and deflate each air spring independently to different pressures. The one-touch control from inside or outside the vehicle makes them perfect for uneven or top-heavy loads. And with two user-defined memory buttons, WirelessAir can remember your frequently used settings. Control the air like a boss with your Air Lift WirelessAir 2nd generation kit. Features and items: * LCD-display wireless controller * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * Heavy-duty air compressor * All wiring, hardware, and fittings required for installation
( 1 )
$665.95
Made from heat-treated 4140 chromoly spring steel, these Hellwig anti-sway bars reduce body roll, even during tight cornering. They come with high-durometer polyurethane bushings to ensure superior performance—and install easily with basic hand tools. Mounting hardware is included.
( 569 )
$593.61
—
$656.69
Race cars ride low to the ground for greater agility, handling, and cornering. Obtain this physics-defying stance with Belltech lowering kits with Nitro Drop 2 shock absorbers. The completely redesigned Nitro Drop 2 shocks fuse internal valve technology with state-of-the-art construction to achieve superlative performance characteristics. They drop your center of gravity for nimble steering, diminished squat, and eye-popping looks, while producing maximum durability with quality-driven dust boots and rubber bushings. Nothing could be better than capturing unsurpassable performance with the ease of an OEM replacement!
( 67 )
$614.00
—
$722.00
RoadActive Suspension systems are the only rear leaf spring suspension upgrade that converts basic "passive" leaf spring suspension to mechanical "active" suspension. Their systems absorb and dissipate load force energy, resulting in significantly improved vehicle stability, balance, traction, and control … all with or without a load. RoadActive Suspension systems add critical strength to leaf springs, but will not compromise ride quality. They're like helper springs, sway bars, and traction bars, all in one package. The systems are available for thousands of vehicles from the 1960s and up. Order the kit recommended for your application. Features include: * Improved driver control, safety, and stability, with or without a load * Eliminate sway and reduce roll on corners * Reduce axle wrap and wheel hop * Strengthen rear leaf springs for towing or hauling maximum loads with maximum safety * Absorb loads, rather than resist them, for a much more comfortable ride * Eliminate the need for fitting extra leaves or stiffening the springs * Better handling and control in windy and rough road conditions * Easy to install--can be fitted in approximately 60 minutes with no welding or drilling * Secured under their own coil spring tension
( 34 )
$539.00
Air Lift air compressors are designed for use with their Load Controller II systems. If you're looking for replacement compressors for your system, they provide the power that you need to inflate your air lines.
Not Yet Reviewed
$514.99
Bilstein B8 control arms offer a direct-fit upgrade for factory upper control arms on trucks and SUVs. The kits contain a pair of control arms that correct the caster alignment for better straight-line stability with lifted suspensions; while the improved pivot angles increase wheel travel and reduce stress on the joints. These rugged chromoly arms with a durable finish feature a tubular design which allows for more spring and shock clearance, along with greasable polyurethane bushings and heavy-duty ball joints for the ideal combination of ride quality and durability with minimal maintenance. Compatible with all their shocks and coilover kits, Bilstein B8 control arms come with detailed instructions and the necessary hardware for easy installation (all components are replaceable). Pairs are available for hundreds of vehicles from the early 2000s and up.
( 4 )
$713.00
Bilstein B8 8100 Series bypass shocks are direct-fit, position-sensitive dampers for light trucks and SUVs. These motorsports-inspired shock absorbers utilize a dual tube externally adjustable bypass design. They feature "incremental flow" bypass adjusters, allowing for finite and incremental changes for rebound and compression. Bilstein B8 8100 bypass shocks will maximize your driver experience, offering unparalleled ride comfort and incredible bottom-out control. Many sizes and options are available; order the shocks recommended for your vehicle. Additional details: * Shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle * Remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for easy fitment * Zinc plated finish * Non-coilover 60mm body diameter
Not Yet Reviewed
$599.00
—
$784.00
Rough Country offers N3 Series suspension lift kits for thousands of trucks from the late 1960s and up—including models from Chevrolet, GMC, Cadillac, Dodge, RAM, Ford, Jeep, Toyota, Nissan, and Mazda. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle anywhere from 1.5 in. to 7.5 in. This is accomplished via a variety of lift component options, such as steering knuckles, torsion bar keys, spacers, strut kits, A-arm brackets, coil springs, leaf springs/blocks, upper control arms, Add-a-Leaf, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, a clean level look, increased ground clearance, and plenty of ride height to accommodate larger tires. Rough Country kits feature front and/or rear N3 nitrogen-charged shocks for incredible ride quality on- and off-road. Most kits are 100 percent bolt-on, requiring no cutting, drilling, or welding. Enhance your rig with all-new stature; order the lift kit recommended for your truck!
( 14 )
$519.95
—
$699.95
Whiteline sway bars are designed and engineered to dramatically improve grip, handling, and outright performance. Available for front or rear sway bar applications, depending on your suspension part needs, these anti-sway bars will bring out the absolute best-handling performance possible in your vehicle. So, when you are servicing your sway bar assembly, choose these high-quality sway bar components from Whiteline—the suspension experts! Order the sway bar model designed for your specific part application needs.
( 24 )
$604.88
—
$728.88
Time for a suspension upgrade? You can increase wheel travel by upgrading your OE upper control arms to BDS performance. BDS Suspension front upper control arms are specially designed for leveled and lifted applications, and they come fully assembled, ready to install right out of the box. Built from high-strength 1.5 in. O.D. x .120 in. thick wall steel tubing, the UCAs feature an indexed ball joint cup to correct the ball joint positioning. They can be used with BDS lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific rubber bushings and premium quality, greaseable ball joints for smooth, quiet operation, and superior durability compared to arms featuring uniballs, poly bushings, or heims. Choose the upper control arms designed for your vehicle.
( 1 )
$770.95
Firestone Ride-Rite air helper springs are heavy-duty, convoluted air springs that mount between the suspension and frame of your vehicle. They're designed to improve ride and handling, increase traction, and reduce suspension fatigue. Ride-Rites are equipped with individual inflation valves, so you can level your vehicle front-to-rear or side-to-side when you're carrying off-center loads. They can boost your load-carrying capacity from 3,200 to 5,000 lbs. per set. Some drilling may be required on certain models. Order the Firestone Ride-Rite air helper springs designed for your vehicle application.
( 244 )
$565.83
ReadyLift SST lift kits are the perfect solution if you want to add a little lift. They are the first-ever mild lift kits that allow you to use larger wheel and tire combinations, while keeping that smooth OEM ride and drivability. ReadyLift's "Smart Suspension Technology" is used to make these kits very user-friendly to install and they require no cutting.
( 14 )
$559.95
—
$629.95
If you want to improve your vehicle's on-road performance and off-road capabilities, Rough Country M1 loaded strut kits are the way to go. They help stabilize your vehicle's movements, enhancing control when you turn, brake, accelerate, or ride over uneven surfaces. As an adjustable ride height strut, they help keep your suspension from overextending, providing a more consistent ride by utilizing multiple grooves in the strut body so the spring perch can be raised or lowered. This lets you add a little extra clearance for off-roading or just sit a little higher while driving down the road. Made for rugged off-road performance, these struts have a 46mm digressive piston for a more stable ride, preserving the smooth ride quality you need. Build your perfect setup with an assist from the Rough Country M1 loaded struts best suited for your application. More product features include: * Extruded seamless 2 in. tube * Self-adjusting, deflective-disc independent rebound and compression * Centerless-ground, case-hardened, chromed, and super-polished 18mm rod * Zinc plated for resistance against harsh elements * Durable vulcanized natural rubber bushings * Available in various lift heights for multiple applications * Some models are not designed to work with strut spacers * Some models will not fit vehicles equipped with factory air ride systems * Most M1 struts are pre-set at 2 in.
( 1 )
$549.95
Fox 2.0 Performance Series coilover shocks utilize proven damping technology to provide a comfortable on-road ride and predictable off-road handling in a variety of conditions. The mono-tube design's internal reservoir separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP (Internal Floating Piston) eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving. Locking, spring preload rings allow easy ride height and preload adjustment retain a top-quality racing coil, selected to deliver the optimal spring rate. The Fox 2.0 Performance Series coilover shocks bolt-on with no modifications and are designed to level your truck front-to-rear. The metal impact-extruded aluminum body increases cooling capacity and resists rust. The vehicle-specific upper mount includes a composite bushing that isolates noise and vibration. Product highlights: * Body: 2.0 metal impacted CNC-machined 6061-T6 billet aluminum bodies * Body Plating: Thick silver powdercoat with clear anodized for a durable finish * Components: Black-anodized, CNC-machined 6061-T6 billet aluminum * Internal Reservoir: Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen * Mounting: Direct replacement for stock and aftermarket lifts kits * Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Piston: Race-developed high-flow piston design * Seals: Redundant sealing pack system main seal, wiper seal, scraper seal * Shaft: 5/8 in. hard chrome plated heat-treated alloy steel shaft * Spring: Application-specific, adjustable Eibach racing springs * Valving: Application-specific valving to maximize performance
Not Yet Reviewed
$569.20
Belltech lowering kits with Street Performance shock absorbers properly lower your sport truck or SUV--the first time. Not only that, they provide you with all the components you need to achieve the look you want, as well as the alignment, performance, and safety you need! All of these kits feature Belltech premium twin-tube Street Performance shocks that set the standards for performance handling. Each lowering kit is model-specific and assures proper fit and function today, tomorrow, and years down the road on your vehicle. Tune your rig with the performance of Belltech lowering kits and Street Performance shocks.
( 110 )
$673.00
—
$781.00
Built to handle whatever the trail can throw at you, these Trail-Gear rear leaf springs are engineered to keep the rear of your vehicle traveling smooth and stable. Featuring a full military wrap on the front and a 1/4 on the rear, these springs will keep your rear riding right, no matter the terrain. Packed for power, they are built seven leafs strong, with an additional special torque leaf to reduce axle wrap. Keep the rear of your vehicle up and your springs strong, with these Trail-Gear rear leaf springs.
( 2 )
$699.99
Fox Racing Shox 2.0 Performance Series coilover IFP shocks were developed through advanced technology—and with a long list of features that set them apart from other coilovers. The precision metal impact-extruded aluminum body increases cooling capacity and is rust-resistant; and the vehicle-specific upper mount includes a composite bushing that isolates noise and vibration. Locking spring preload rings (that allow easy ride height and preload adjustment) retain a top-quality racing coil, selected to deliver the optimal spring rate. Easy to install, IFP shocks provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions. The shocks are available in dozens of models and options for applications from 1995 and up. Additional features include: * Body: 2.0 in. impact-extruded and CNC-machined 6061-T6 aluminum one-piece body resists rust over time * Body plating: Clear-anodized for a durable finish * Reservoir: Internal IFP monotube reservoir design separates shock oil from the high-pressure, nitrogen-charged gas chamber * Components: Black-anodized, CNC-machined 6061-T6 billet aluminum * Shaft: Hard-chrome plated heat-treated alloy steel * Piston: race-developed high-flow piston design * Valving: Application-specific valving to maximize performance * Seals: Redundant sealing pack system main seal, wiper seal, scraper seal * Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Bearing: Large diameter, heavy-duty spherical * Bolt-on installation
( 10 )
$629.95
Now available with a heavy-duty 25 percent higher spring rate, Trail-Gear Super Flex front leaf springs are perfect for heavier trucks and 4Runners that need that extra strength for the trail. They are also great for V6 and V8 engine swaps. Remember, if you install a heavier engine, it may be a good idea to improve your suspension. Otherwise, it's like asking your ride to do the same trail while overloaded with weight. It may get you to the trail faster, but those hills and terrain may just be too much for it to run that chassis and engine over. With these Trail-Gear Super Flex springs engineered to hold their arch and lift longer, your ride will be able to handle the weight and the trail.
( 3 )
$599.99
ReadyLift leveling and big lift upper control arms provide the strength of a race-style uni-ball arm with the ride quality and characteristics of factory parts through the use of a newly designed high-angle ball joint. They offer increased strength and travel for your suspension with corrected geometry and alignment, after your vehicle is lifted. ReadyLift UCAs are designed for OE-like ride quality on-road without the noise of traditional uni-ball arms. This is due to their proprietary Terrain Control Technology bushings that ensure quiet, durable, and stable pivot performance. The upper control arms are powdercoated for an attractive, yet durable finish combined with a sealed dust cap providing for years of quiet performance. Select the kit designed for your truck. Kit contents, features, and benefits: * One pair of heavy-duty DOM tube steel upper control arms with corrected ball joint angles and heavy-duty ball joints * ReadyLift TCT maintenance-free and self-lubricating pivot bushings * Compatible with stock wheels and tires * Proprietary heavy-duty, high-angle ball joint allows for increased strength and angle for greater wheel travel for lifted applications without sacrificing ride quality * Billet O-ring dust cap and sealed ball joint assembly protects against corrosion, dirt, and debris in harsh off-road conditions * Gusseted pivot and ball joint housings are designed for maximum clearance and engineered for maximum strength * Super-durable polyester black powdercoat finish is long-lasting, maintains a premium look, and protects from humidity and corrosion
( 1 )
$648.99
—
$649.95
On Sale
RSO Suspension tubular upper control arms are a must-have for your off-road vehicle. A black E-Coat finish, sealed hardened rubber bushings, dust caps, and high angle dual lip rubber boots ensure greater corrosion and weather resistant than factory arms can achieve. These heavy-duty arms are constructed from fully gusseted 1.5 in. tubular steel and use heat-treated chromoly ball joints and sealed bushings to power through the harshest terrain. They're designed and CNC-bent to increase wheel travel, correct suspension geometry, and allow larger coilovers—while preventing binding throughout the articulation range. Direct bolt-on designs utilize factory-style brake line and ABS mounts with all hardware required for a quick installation. RSO tubular upper control arms are the next great upgrade for your lifted truck. Order the pair recommended for your vehicle.
Not Yet Reviewed
$636.99
$573.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
