Availability
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel alignment shim kits provide you with enough stainless steel shims for one car. Contents: * Eight 1/32 in. shims * Eight 1/16 in. shims * Eight 1/8 in. shims
( 2 )
$29.99
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel T-arm bolt and shim kits provide you with everything needed to do both the right and left side. Contents: * One stainless steel shim kit * Two bolts * Two castle nuts * Two cotter pins * Four washers
Not Yet Reviewed
$91.99
Rein Automotive power steering replacement parts are designed to fit just the way the original manufacturer intended. They are manufactured to strict engineering standards/specifications in materials and tolerances. Order the Rein Automotive replacement part designed to fit your application needs.
Not Yet Reviewed
$46.99
Bump steer is when the front wheels steer themselves without input from the steering wheel. The undesirable steering is caused by bumps in the road interacting with improper length or angle of the suspension and steering linkages. Van Steel bump steer kits are stronger than factory and control toe change. They feature inboard and outboard heims to replace factory inner and outer tie rod ends without modification. They also use stainless steel studs along with the chromoly heims that have a static load of 18,000. The sleeves are powdercoated with a durable finish.
Not Yet Reviewed
$476.99
Van Steel offers ball joint dust boots for a variety of applications, including Chevrolet Corvette models from the 1960s, '70s, and '80s. The kits include four durable polyurethane tie rod end boots—two for the upper ball joints, two for the lower ball joints. Order the boots recommended for your vehicle.
Not Yet Reviewed
$21.99
Van Steel upper alignment stud kits allow you to align your Corvette from the top. Studs are used on the front upper a-arms in leu of the OE bolts. By sliding the a-arm off the stud, you can add or subtract shims to obtain your alignment specs. It will be ideal to have the car aligned with street specs and race specs, and then note the differences in shims for a quick change-out. Kits include: * Non-corrosive stainless steel studs * Stainless steel alignment washers * Class 10 nuts * Nord Loc lock washer
Not Yet Reviewed
$104.99
Summit Bucks
ACDelco offers power steering reservoirs for many vehicles on the road today. They hold the fluid for your power steering pump and are an integral part of the hydraulic power steering system. Replace your worn, leaking, or faulty reservoir with an ACDelco reservoir. They are manufactured meet or exceed your expectations for fit, form, and function.
( 4 )
$211.99
Borgeson Dodge Cummins Diesel Hi-Flow power steering pumps offer all of the power that you need for your rig's steering. These are direct replacements featuring a new reservoir with two returns (ships with one capped) for all hydro-boost or vacuum brake applications. The pumps are calibrated to 1,450-1,550 psi and 3.5 gpm for output pressure/flow to provide your Ram with plenty of power. Upgrade your diesel with Borgeson Dodge Cummins Diesel Hi-Flow power steering pumps and make your steering easier.
( 18 )
$181.48
Cardone remanufactured power steering pumps are among the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their technicians pinpoint original equipment design weaknesses by examining failed cores. You'll benefit from the Cardone expertise when you order the remanufactured power steering pump designed to fit your application. Features include: * All critical components are triple-tested to ensure reliability * All units are built with 100 percent new O-rings and premium-grade Viton® seals to prevent leaks and avoid high-temperature breakdown * Every pump is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort, and noise * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life * Units are supplied with 100 percent tested and calibrated pressure relief valves * Cardone remanufactured parts are business and environmentally friendly
( 142 )
$47.99
—
$69.99
To get the most benefit from your vehicle suspension, it's essential to install all available assets--including Gabriel steering stabilizers. These inexpensive kits dampen the shimmy or wobble effect which occurs from adding lift or larger tires to your ride. Vibrating problems can often be tamed with quality stabilizers, and they reduce driver fatigue by facilitating easier turns on the highway, track, or paths less traveled. Gabriel offers a variety of models to fit scores of cars, trucks, vans, and Jeeps. Just match up your vehicle specs to the correct steering stabilizers … and make the shake a distant memory.
( 12 )
$54.99
Summit Bucks
Clearance
ACDelco Gold king pin replacement components range from knuckle bushings and spring pin caps … to seals, bearings, hardware, and more. These OE-style parts are manufactured to meet or exceed your expectations for fit, form, and performance.
( 2 )
$1.99
$1.50
Clearance
Lares takes care to clean their remanufactured power steering pumps thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent seals and O-rings; and the pumps are then tested to ensure proper performance. Over a thousand models are available; order the power steering pump recommended for your vehicle.
( 20 )
$64.99
Spicer Drivetrain Products offers ball joints for a broad range of applications, from the 1970s and up. These OE-style replacements are made from quality materials, and most include mounting nut and cotter pin for installation. Swap out your worn or damaged original ball joints with a new kit from Spicer.
( 100 )
$220.99
Summit Bucks
ACDelco Gold steering dampers are high-quality aftermarket replacements for your steering and suspension systems. These premium components are manufactured to industry standards and specifications to meet or exceed your expectations for accurate fit and performance. Order the model recommended for your vehicle.
Not Yet Reviewed
$43.99
Clearance
Dorman replacement steering knuckles are precision-engineered and rigorously tested to OEM tolerances to fit your stock application without making any modifications. They are manufactured from premium materials to provide a reliable fit and quality. The knuckles are available for passenger cars, trucks, and SUVs, so they have your application covered.
( 2 )
$181.99
—
$184.99
Summit Bucks
Rancho steering stabilizer brackets are designed to help you mount a steering stabilizer to your vehicle without any modifications. They are made of steel and include the mounting hardware for an easy installation.
( 11 )
$78.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
