Availability
EPAS Performance's Hydroelectric Pump System has a program that works with an angle sensor and CAN protocol. The converter talks to the pump via the angle sensor, ramping up the system's pressure as needed. There is no noticeable delay or drop in pressure when input at the steering wheel is exerted. This steering conversion kit includes 6 ft. of high-pressure sending hose, 6 ft. of low-pressure return hose, and the power cords are 10 ft. in length. An oil cooler can be added for racing applications. The wiring harness is essentially plug-and-play, and only requires a hot ignition source and full battery power. System draw is anywhere between 1 amp to 45 amps, spending most of its time in the lower amp range. Maximum pressure of the unit is rated at 1900 psi @ 5 gpm; and the absolute maximum length of the pressure hose and return lines is 17 ft. INCLUDED IN KIT: * EPAS Performance Hydroelectric Pump * Universal mounting bracket * High-pressure sending hose * Low-pressure return hose * Pre-wired control module
Not Yet Reviewed
$1,884.99
EPAS Performance electric power steering kits provide modern power steering for your classic car. These performance systems are available to outfit a wide range of vintage and classic vehicles from 1920-1980. An easy step-by-step installation manual is available online for each of the kits that EPAS offers. There is no major or irreversible modifications made to your vehicle, as everything is located under your dash and is almost, if not completely, invisible. How the systems work: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer allows you to have more or less assistance, so you can adjust the amount of power assist. For example, you can have maximum power assist while on a parking lot, and less on the highway. Select the EPAS Performance electric power steering kit for your application needs. EPAS Performance electric power steering kits include: * Electric motor unit * Mounting hardware * Prewired control module * Some kits may also be available with steering columns
( 23 )
$1,487.99
—
$2,768.99
Upgrade your Bronco's off-road capability with an all-new, complete, ready-to-install steering gear from Ford Performance Parts. These severe-duty rack and pinions feature a higher torque motor and improved and reinforced steering gear casing from the Bronco Raptor, stronger inner tie rods with improved articulation, and reinforced outer tie rods with increased deflection ball joints. They significantly reduce steering efforts in various off-road conditions. Additional details: * Requires Ford Pro-Cal 4 to program and configure the steering gear * 2.7 Bronco with Performance Tune - M-9603-B27 * 2.3 Bronco with Performance Tune - M-9603-B23 * Pro-Cal 4 Tool only (minimum required to complete install) - M-12655-F * Steering upgrade kit includes Pro-cal voucher for steering gear calibration * Fitment: --- 2021-24 2-door (all models) are compatible --- 2021-24 4-door Bronco with Sasquatch package --- 2021-22.5 4-door Bronco Wildtrak * Module configuration required * Note: Pro-Cal 4 needs to be connected to the vehicle before the original steering rack is removed to be able to properly configure and program the new steering gear. * Exclusions: 2021-23 Bronco 4-door base, Big Bend, Outer Banks, Black Diamond, and Badlands that do NOT have the factory Sasquatch Package.
Not Yet Reviewed
$1,107.99
Hitachi offers hydraulic rack and pinions for a wide range of vehicles, particularly import models. The units are made from a combination of high-strength steel alloy for durability and aluminum for weight reduction and better heat dissipation and come with required bushings, tie rod ends and mounting brackets. Precision-machined installation points allow for proper installation of auxiliary components that were on the vehicle originally, such as speed sensitive power steering modules. Designed to meet the exact needs of each specific vehicle, Hitachi rack and pinion assemblies are the premium choice. Order model recommended for fitment on your car or truck.
( 1 )
$521.99
—
$966.99
Mopar Replacement offers rack and pinions for a wide range of vehicles. These OE-style parts are built with factory materials and specifications to ensure proper fit and performance with no modifications needed. Rack and pinion gear sets have two main functions: Conversion of the steering wheel's rotational motion into the linear motion needed for the vehicle's wheels to turn; and reduction of gears, which makes it easier for the steering wheel to turn the wheels. Whether you drive a Jeep, Dodge, Chrysler, or other Mopar ride, you'll find a dependable replacement to restore optimum steering function.
Not Yet Reviewed
$1,269.99
—
$3,070.99
Mopar Replacement tie rod ends offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. Service your vehicle with genuine Mopar Replacement tie rod ends and maintain the legendary performance you've come to expect. They're available in multiple configurations; order the model designed for fitment on your vehicle application.
Not Yet Reviewed
$102.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
