Availability
Showing In Stock Items. Show All 33 Items.
Instant Rebate
TeraFlex HD tie rod and drag link kits are built for punishment. Extreme conditions that normally would cause your factory steering components to bend and fail are where these kits will survive. They are designed and engineered to be strong and durable to take you through the terrain, over the rocks, and back home. Outfit your rig with TeraFlex HD tie rod and drag link kits. TeraFlex kits feature: * HD tie rod is 1.6 in. O.D. 4140 heat-treated chromoly * Forged tie rod end housing designed * Allows proper clearance for use with factory 17 in. wheels * Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housing * Adjustable preload tension to ensure proper long-term durability * Includes the clamp or the TeraFlex steering stabilizer relocation kit * The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the tie rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. * 1.25 in. O.D. fully forged drag link eliminates excess movement during hard steering maneuvers * Oversized DOM factory-style adjusting collar and pinch clamp for simple adjustments
( 4 )
$875.69
—
$895.15
Instant Rebate
Now you can tune your power steering with Heidts adjustable power steering valves. They allow you to set, or tune, the feel of your power steering with just the turn of a knob. These valves are manufactured from durable aluminum and then anodized for a corrosion-free finish.
( 13 )
$134.10
Instant Rebate
TeraFlex ball joints can help keep your Jeep's off-road integrity intact! Engineered to perform under heavy stresses with excellent wear, these replacement ball joint kits easily handle the increased load caused by oversized tires and offset wheels. The upper ball joints incorporate hard sintered wear bushings to endure extreme side load demands without failure; while the lower ball joints feature a threaded top cap for adjustable preload—and allow grease servicing without axle shaft removal. TeraFlex ball joints feature carbon steel housing with magnesium phosphate coated assembly, plus chromoly ball/stud with magnesium phosphate anti-corrosion coating. For easy maintenance, the TeraFlex ball joints include grease zerks.
( 7 )
$91.07
—
$286.43
TeraFlex Jeep JL/JT Dana 30/44 heavy-duty ball joints are designed to fit all JL Wrangler/Unlimited and JT Gladiator models with Dana 30 or Dana 44 front axles. These heavy-duty ball joints are engineered to handle the increased load caused by oversized tires and offset wheels. Whether you want to restore your stock chassis to like-new performance or you're looking to improve upon the factory design, TeraFlex has got the right upper and lower ball joints to replace your worn out, damaged, or inferior ball joints.
( 3 )
$278.99
TeraFlex Falcon Nexus EF 2.2 Fast Adjust steering stabilizers offer a wide range of adjustability with a 3-position fast adjust knob featuring soft, medium, and firm settings. These Jeep-specific steering stabilizers deliver a properly weighted steering feel and consistent bi-directional turning for balanced and controlled side-to-side steering response and an equal return to center dynamics. Built from the ground up with a focus on fitment and function, these Wrangler-specific Falcon Nexus EF (Equal Force) steering stabilizers deliver the best damping characteristics possible.
( 1 )
$404.54
Instant Rebate
The TeraFlex 9550 VSS steering stabilizer reduces bump steer, front end shimmy, and wobble in modified Wrangler models with lifted suspension systems and larger off-road tires. This stabilizer is superior to the factory unit and meets the additional demands and stresses of a modified off-road vehicle.
( 6 )
$66.02
—
$73.79
Instant Rebate
Many vehicles use rack and pinion steering, where the steering wheel turns the pinion gear, the pinion moves the rack, converting circular motion into linear motion along the transverse axis of the car. Heidts is an industry leader in hot rod and muscle car parts that you can trust for quality. They offer several choices of manual and power rack and pinions (rack only), as well as kits (may include hardware, tie rod ends, spacers, etc.). Constructed from premium materials, they allow you to replace or upgrade the units that are included with Heidts front suspension systems. Choose a rack and pinion or kit designed for your vehicle's application.
( 1 )
$458.10
—
$680.40
Instant Rebate
Heidts steering arms are made to work with your Heidts custom suspension components to give you the best performance from your suspension. Each arm is carefully designed from solid steel and finished in a durable powdercoated finish. When it comes to the best handling and performance Heidts steering arms are a must-have for any vehicle with a Heidts custom suspension system.
Not Yet Reviewed
$105.30
Instant Rebate
Steering column adapters undergo a lot of stress. Heidts offers high-quality replacement steering column adapters for many common applications. Each adapter is made to match OE specifications to retain a stock appearance and performance. Select the model designed for your application needs.
( 4 )
$32.40
—
$108.00
Instant Rebate
May the "force" be with you—TeraFlex Falcon Nexus EF (Equal Force) 2.2 stabilizers. Offering fast adjustment, these Falcon stabilizers have been explicitly and uniquely engineered for your Jeep JK Wrangler to provide balanced and controlled side-to-side steering response, with a properly weighted steering feel. Nexus EF stabilizers will deliver consistent bi-directional turning force, and equal return-to-center dynamics. They feature 2.125 in. diameter 6061 hard anodized aluminum bodies with low-profile body caps optimized for maximum clearance and unobstructed suspension travel. The patent-pending stabilizer design maintains smooth movement under extended and rapid turning maneuvers, as the integrated oil/gas separator maximizes performance by preventing cavitation. Features and benefits: * JK-specific stabilizer * Equal force side-to-side resistance for consistent steering wheel response * Allows for balanced return-to-center equilibrium * No shaft displacement issues (no external reservoir required) * Inline oil/gas separator prevents cavitation * Smooth honed internal shock body surface for long-term performance * 5/8 in. hard chrome, induction-hardened shaft resists rock damage and corrosion * One-piece PTFE bronze piston wear band with O-ring * Optimized fitment for clearance during full suspension travel and articulation * OEM-style sealed rod end joint mounting provides direct responsiveness * Red Line full synthetic shock oil * 1,000 hour salt spray corrosion resistance test on all hardware * Built in-house at the TeraFlex Falcon Shock Division * Fast Adjust knob with three quick compression adjustments—soft, medium, and firm * 3-year warranty * Patent-pending design
( 6 )
$395.84
Instant Rebate
Heidts rack and pinion extension kits are designed to extend the center portion of the Mustang II rack and pinion. They can also be used with wider Mustang II based kits to keep the steering geometry precise. Heidts rack and pinion extension kits include two 2 in. rack extensions, two extra-long bellows, and installation hardware. The kits are available for different thread sizes; be sure to measure the thread on your rack and pinion to determine the correct size.
( 3 )
$77.40
—
$91.80
Instant Rebate
Heidts rack and pinion spacers provide the exact hardware your rack and pinion installation needs. They are constructed from high-quality materials and available in multiple fitments and thicknesses to accommodate your specifications.
( 1 )
$14.40
Instant Rebate
Keep your ride stable and straight with Heidts tie rod ends. Available for a selection of applications, Heidts tie rod ends are available in steel or shiny stainless steel. And if you should need rod ends for your narrowed control arm, Heidts has those, too. Keep your hot rods in line with Heidts tie rod ends.
Not Yet Reviewed
$32.40
—
$73.80
Instant Rebate
Heidts steering shafts are available in different lengths and styles to help you build a correct-length steering shaft assembly. They are manufactured from high-grade, durable steel and are precision-cut in a variety of lengths.
( 11 )
$11.70
—
$639.00
Instant Rebate
TeraFlex offers heavy-duty tie rods for dozens of Jeep applications from 2011 and up. These kits are designed for extreme conditions that typically cause factory steering components to bend and fail. Constructed from chromoly steel, each HD tie rod features a larger 1 5/8 in. O.D. design for strength; in fact, they 200 percent stronger than the stock tie rod assembly. Order the model recommended for your vehicle.
( 1 )
$487.79
TeraFlex Falcon steering stabilizer tie rod clamp kits permit you to adapt your existing Falcon Nexus EF steering stabilizer to many popular aftermarket tie rods. TeraFlex clamp kits are offered in two choices for 1 1/2 in. or 1 5/8 in. tie rods. Kits include clamp, hardware pack, a Falcon Shield badge, and Falcon sticker.
Not Yet Reviewed
$53.09
—
$53.68
Instant Rebate
The '60s brought us musclecars, the Beach Boys, and "Good Vibrations"! While "Good Vibrations" is a great song, it's not so great if that's what you're feelin' from your rack and pinion. Heidts has individual steering components for your ride, like these U-joints. These automotive-grade U-joints with dual-sealed needle bearing construction--not pin or bushing-type--are the safest available. Heidts U-joints also feature forged yokes for super strength and safety, plus pre-spot drilled holes for double pinning. If you're pickin' up bad vibrations, replace your worn U-joints with Heidts so you can get around from town to town--doo-wah!
( 3 )
$98.10
—
$140.40
Instant Rebate
Heidts steering components are perfect for your independent front-end. Their rod end bearings are zinc plated forged steel and include a jam nut. Build your hot rod with quality steering shaft support bearings from Heidts.
Not Yet Reviewed
$55.80
TeraFlex drop pitman arms help to keep your lifted vehicle in line. They correct steering geometry on vehicles with 3.5 in. or more of lift. They feature steel construction with a durable black finish. TeraFlex drop pitman arms fit all Wrangler models including Rubicon and Unlimited.
Not Yet Reviewed
$73.70
Instant Rebate
Give your hot rod smoother steering with Heidts ball joints. These quality-built upper and lower ball joints are perfect for replacing the ones on your Mustang II. When you need components for your original factory arms, Heidts has the ball joints that you need.
Not Yet Reviewed
$58.50
—
$59.40
TeraFlex Jeep JL/JT Falcon Nexus EF 1.1 stabilizers improve steering feel on daily driven Jeeps. Optimized for on-road driving with increased stability over stock for off-road driving, these vehicle-specific units offer high-value performance, delivering a properly weighted steering feel, along with consistent bi-directional turning for balanced and controlled side-to-side steering response and an equal return to center dynamics. Features and benefits: * OEM-style sealed rod end joint mounting provides direct responsiveness * Equal Force (EF) side-to-side resistance for balanced steering wheel response * Maintains smooth movement under extended and rapid turning maneuvers * Low-profile body cap for maximum clearance and unobstructed suspension travel * 2 in. shock body for high value performance * 6061 T-6 aluminum alloy shock body resists Impact to protect internal components * Smooth honed internal shock body surface for long-term performance * 1/2 in. induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling * No shaft displacement issues (no external reservoir required) * One-piece energized PTFE bronze piston wear band * Digressive linear piston and base valve technology * OGS (Oil/Gas Separator) prevents cavitation * Red Line synthetic oil for consistent performance across all temperatures * Synthetic formula also contains special anti-wear and lubricity agents * 1,000-hour salt spray corrosion resistance test on all hardware * Serviceable and rebuildable (factory serviced)
Not Yet Reviewed
$194.73
TeraFlex60 Hydro Ram Assist steering bracket and HD tie rod clamp kits allow you to bolt a PSC hydraulic ram assist to your steering system. These kits are available for adjustable or fixed Heim-style ram assist steering systems. They are for use with a raised front track bar bracket. Product features and benefits: * Fits Tera60 front axles with adjustable Heim-style hydraulic steering ram ends * Available for adjustable or fixed Heim-style ram assist steering systems and are for use with a raised front track bar bracket * Easily adjusts toe setting, differential clearance, and lock-to-lock steering position * The TeraFlex JK hydraulic ram assist tie rod clamp features a 5/8 in.-18 threaded bung to easily attach a hydraulic ram assist to the TeraFlex JK: 42mm HD tie rod without welding * Bracket constructed from CNC laser cut 1/4 in. plate steel with a durable powdercoat finish
Not Yet Reviewed
$151.19
Instant Rebate
Finish off your ball joints with these Heidts ball joint caps. Manufactured from the highest quality materials, they are polished to a brilliant finish. The caps are available in different styles and can only be used on Heidts tubular control arms.
( 2 )
$90.00
—
$289.80
Instant Rebate
TeraFlex Falcon Nexus EF (Equal Force) 2.1 stabilizers have been explicitly and uniquely engineered for your Jeep JK Wrangler to provide balanced and controlled side-to-side steering response, with a properly weighted steering feel. Nexus EF stabilizers deliver consistent bi-directional turning force, and equal return-to-center dynamics. They feature 2.125 in. diameter 6061 hard anodized aluminum bodies with low-profile body caps optimized for maximum clearance and unobstructed suspension travel. The patent-pending stabilizer design maintains smooth movement under extended and rapid turning maneuvers, as the integrated oil/gas separator maximizes performance by preventing cavitation. Features and benefits: * JK-specific stabilizer * Equal force side-to-side resistance for consistent steering wheel response * Allows for balanced return-to-center equilibrium * No shaft displacement issues (no external reservoir required) * Inline oil/gas separator prevents cavitation * Smooth honed internal shock body surface for long-term performance * 5/8 in. hard chrome, induction-hardened shaft resists rock damage and corrosion * One-piece PTFE bronze piston wear band with O-ring * Optimized fitment for clearance during full suspension travel and articulation * OEM-style sealed rod end joint mounting provides direct responsiveness * Red Line full synthetic shock oil * 1,000 hour salt spray corrosion resistance test on all hardware * Built in-house at the TeraFlex Falcon Shock Division * 3-year warranty * Patent-pending design
( 1 )
$291.59
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
