Availability
Showing In Stock Items. Show All 21 Items.
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 25 )
$995.00
—
$1,050.00
UniSteer Camaro/Nova rack and pinion kits are superior steering components designed with racers in mind. They're engineered to match the factory geometry for specific Chevy model years—resulting in no-bump steering. These racks come mounted on a custom bracket that makes installation a breeze. The unit mounts to the rear of the crossmember, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms; no fabrication is required. Compact and lightweight, the parts offer maximum ground clearance and can drop up to 65 lbs. off the stock front end. UniSteer rack and pinion kits also include outer tie rods, mounting bracket, hardware, and instruction sheet for installation. Order the conversion kit tailored for fitment on your vehicle. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 18 )
$933.99
Flaming River VDOG variable angle gears have a strong aluminum housing—available in either cast or billet—and the output shaft is 3/4-36 in. for compatibility with universal joints. Each unit is gear driven without any chains or sprockets. It can be mounted in horizontal or vertical positions—ideal for cab-over vehicles, T-Buckets, and specialty builds with big motors and tight firewall clearance. Order the material and finish you prefer. Additional features: * 90 degree gear box with a 35 degree variable angle shaft * Articulating ball design for maximum adjustability * 1:1 ratio to maintain rack and pinion or steering box gear ratio * Award-winning: 2019 SEMA Best Engineered New Product and Best New Street Rod Product
Not Yet Reviewed
$836.99
—
$978.99
Many vehicles use rack and pinion steering, where the steering wheel turns the pinion gear, the pinion moves the rack, converting circular motion into linear motion along the transverse axis of the car. Heidts is an industry leader in hot rod and muscle car parts that you can trust for quality. They offer several choices of manual and power rack and pinions (rack only), as well as kits (may include hardware, tie rod ends, spacers, etc.). Constructed from premium materials, they allow you to replace or upgrade the units that are included with Heidts front suspension systems. Choose a rack and pinion or kit designed for your vehicle's application.
( 1 )
$756.00
Flaming River can equip your vehicle with a steering gear box—whether you own a muscle car, race car, or vintage ride. These units are constructed from totally new components and feature improved designs. Needle bearings, precision worm and nuts, stronger casting designs, and quicker ratios are just a few of the great features found in these steering boxes. They're available in a variety of styles, steering ratios, spline sizes, and other options. Order the model recommended for your application.
( 22 )
$766.99
—
$936.99
JOES Racing Products Micro Sprint electric power steering kits offer the perfect balance between power assist and feedback. Power steering will make a huge difference in your ability to drive fast laps from the beginning of your race to the end. JOES did the research and came up with these electric power steering kits that are very simple to install. Winning performance lives at JOES. Micro Sprint kits include: * Power steering unit * Control box * Wiring harness * Bracket * Steering wheel disconnect * U-joint with 3/4 in. I.D. tube * Instructions
Not Yet Reviewed
$999.95
Astemo offers hydraulic rack and pinions for a wide range of vehicles, particularly import models. The units are made from a combination of high-strength steel alloy for durability and aluminum for weight reduction and better heat dissipation and come with required bushings, tie rod ends and mounting brackets. Precision-machined installation points allow for proper installation of auxiliary components that were on the vehicle originally, such as speed sensitive power steering modules. Designed to meet the exact needs of each specific vehicle, Astemo rack and pinion assemblies are the premium choice. Order model recommended for fitment on your car or truck.
( 1 )
$848.99
—
$1,050.99
Clearance
Lares remanufactured steering gears make the perfect replacement for your original equipment needs. These power steering gears are thoroughly cleaned and all exterior surfaces get reconditioned for a fresh like-new appearance. All units receive new OE-equivalent seals and O-rings, then each unit is tested to ensure proper performance. Lares also lubricates each steering gear unit, and applies a fresh coat of high-quality paint, so they come ready to install them and go! Verify the fitment and order the Lares remanufactured steering gear unit designed to fit your application.
( 58 )
$811.99
—
$901.99
Rock Jock high steer knuckles for all Jeep JL and JT models are a game changer! Simply installing these knuckles raises your tie rod 2 3/4 in. and your drag link 2 1/2 in.! They're designed for use on factory axles or axles that retain factory inner "C" knuckles. The knuckles are intended for use with Rock Jock's other high steer components—to give you a package that provides all the necessary components to accommodate the higher steering location, adjusts all geometry points, and allows you to easily install a hydraulic assist steering ram (or to reinstall your stabilizer shock). Rock Jock knuckles are manufactured to greater-than-OEM standards in every way. Features include premium iron castings, gloss black finish, and precise machining for a component that installs just like factory. Additionally, engineers provided extra threaded steering stop bolt holes ahead of the axle to allow for a second set of stops to be added, giving you firm steering lock stops on both wheels at all times, easing strain on other components. Kit Includes: * Left side high steer steering knuckle * Right side high steer steering knuckle Fitment Specs.: * For use on any factory JL or JT front differential, or any aftermarket replacement axle that features factory specification inner "C" knuckles * Retains factory unit bearings, axle shafts, ball joints, steering stop bolts and brakes with dust shields * Intended to be used with a minimum of a 17 in. diameter wheel and up to a 6 in. wheel backspacing * A minimum of a 2.2 in. bump stop extension is mandatory to keep components from crashing under full articulation range conditions
Not Yet Reviewed
$899.00
Borgeson power conversion kits steer you in the right direction. With true modern power steering feel and feedback, these kits also offer sporty ratios to equip your classic ride with up-to-date precision. Borgeson power conversions are bolt-on kits available for both factory manual and power steering cars. They include re-manufactured integral power steering gearboxes designed to bolt to your stock mounting locations. So, whether you want to convert your manual steering or update your old factory power steering, Borgeson offers a no-cut, no-weld, no-loss of turning radius solution.
( 129 )
$844.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
