Availability
Dorman power steering racks are newly manufactured power steering rack and pinion assemblies that are an upgrade to the factory unit. Each rack features improved seals, free programming and pre-loaded software with a calibration tool. With this software and tool you don't have to take your vehicle to the dealer just to get it programmed. All this convenience—and you get Dorman top-of-the-line quality by each power steering rack unit going through rigorous testing to meet all federal motor safety standards.
( 1 )
$2,039.99
Flaming River 1988-98 Chevy C1500 truck power rack and pinion cradle kits are direct bolt-ins with precision welded cradles manufactured using a 3/8 in. steel plate to assure there is no flexing. Each kit adapts to the original steering column and includes a new slip shaft with U-joints and a hose kit. They have been designed for use with the original power steering pump and the travel bar maintains original geometry. Features: * Designed for use at factory ride height or with 4/6 lowering kit * Solid plate 3/8 in. steel for increased strength * Bolts in place of steering box and idler arm using OE mount locations * Precise, modern steering with no cutting, drilling, or welding to chassis * Features new front steer power rack and pinion * Rack and pinion features .98 in. rack shaft for increased strength * Billet servo valve for cooler operation * Lifetime serviceability and Flaming River tested and certified Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system
Not Yet Reviewed
$2,508.99
UniSteer rack and pinions are designed to provide precision steering for easier driving. Made from cast aluminum with a variety of finishes available, these replacement racks can be ordered to complement either manual or power-assist configurations. They're offered in fitment applications for a wide range of year, make, and model vehicles. Accessories included will depend upon the model you select. Better steering control begins with UniSteer! UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 55 )
$2,109.99
—
$4,690.99
Swap your steering box setup for a lighter, more responsive modern steering system in your classic. Flaming River 1970-81 Camaro power rack and pinion cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes. The kits include your choice of tilt key columns or no-column, a stronger 1 in. rack gear, a billet-joint and column adapter, mounting hardware, a polished aluminum mounting reservoir, and a power steering pump and pulley. All included to allow you more than 6 in. of travel and a full turning radius. Enjoy driving your classic car with this upgrade-- Flaming River 1970-81 Camaro power rack and pinion cradle kits.
( 2 )
$2,572.99
—
$3,687.99
From the people who doing steering right--UniSteer rack and pinion kits deliver the feel and performance of precision. Their conversion kits are well-engineered and built to match the factory suspension, so installation is easy and performance is assured. UniSteer bolt-on rack and pinions are offered in both manual and power kits to fit your application needs. When you want to improve handling, reduce effort, and enhance responsiveness of your driving experience in your classic ride, turn to the experts at UniSteer for a rack and pinion conversion kit. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 8 )
$2,083.99
—
$4,037.99
Rock Crawlers, Ultra 4 Racers, and Rock Racers all need extra help turning locked axles with large tires over rocks and other wild terrain. PSC full hydraulic steering systems turn up to 44 in. tall tires as smooth as glass. They feature new hydraulic cylinders, orbital control valves, and full hydraulic hose kits. Most of the included steering stub collars and brackets require welding. These quick ratio systems change valving and should be used sparingly on paved roads. PSC full hydraulic steering systems are designed to ease arm-strong issues on full time off-road machines.
( 7 )
$2,110.93
—
$3,369.40
Oversize tires, lockers, and rocks will quickly have your stock steering system whining for help. Increase turning force by an average of 50 percent with PSC hydraulic assist steering systems. They feature a new hydraulic-assist steering cylinder with all required mounting brackets, hoses, and fittings. Their new steering gear boxes have been modified for cylinder assist. The valving remains stock to allow OEM handling, control, road feel, and no oversteer. PSC hydraulic assist steering systems turn taller tires like they're stock.
( 12 )
$2,226.99
—
$3,060.00
Flaming River 1965-70 Mustang power rack and pinion cradle kits can upgrade your classic Pony's steering system. The patented conversion kits are stronger, lighter, and more responsive. They also retain the full factory turning radius and offer more travel than your OE system! Mustang power cradle kits feature a welded cradle that bolts right in—no cutting, drilling, or welding is required! They're available to fit with the original or Granada spindles, and come with or without columns that are paintable or polished. Each kit also includes mounting hardware, wiring connectors, universal joints, a power steering pump, a billet bracket and pulley, and a polished aluminum reservoir. All are fluid and pressure-tested before shipping. Order the model recommended for your Mustang application.
( 7 )
$2,019.99
—
$3,374.99
Flaming River 1967-72 C10 power rack and pinion cradle kits are complete and direct bolt-in. They feature solid plate 3/8 in. steel for increased strength, and new front steer power tubular-style rack and pinion. The rack and pinion includes .98 in. rack shaft for increased strength and billet servo valve for cooler operation. Kits are Flaming River tested and certified. Available with no pump—or no pump and no column. Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system
Not Yet Reviewed
$2,288.99
—
$2,952.99
Flaming River 1967-68 Camaro power rack and pinion cradle kits can upgrade the steering system on your classic musclecar! These direct bolt-on systems are stronger, lighter, and more responsive than original equipment. Like Flaming River's manual setup, the power rack and pinion provides a quick steering ratio with full turning radius. The units install using the existing chassis locations on late '60s Camaros and Firebirds. They're available with or without the steering column.
( 1 )
$2,339.99
—
$2,706.99
EPAS Performance electric power steering kits provide modern power steering for your classic car. These performance systems are available to outfit a wide range of vintage and classic vehicles from 1920-1980. An easy step-by-step installation manual is available online for each of the kits that EPAS offers. There is no major or irreversible modifications made to your vehicle, as everything is located under your dash and is almost, if not completely, invisible. How the systems work: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer allows you to have more or less assistance, so you can adjust the amount of power assist. For example, you can have maximum power assist while on a parking lot, and less on the highway. Select the EPAS Performance electric power steering kit for your application needs. EPAS Performance electric power steering kits include: * Electric motor unit * Mounting hardware * Prewired control module * Some kits may also be available with steering columns
( 23 )
$2,111.99
—
$2,624.99
Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.
Not Yet Reviewed
$2,118.99
—
$3,405.99
Flaming River 1965-70 Mustang manual rack and pinion cradle kits steer your classic with the benefits of modern steering systems. Durable, lighter, and more responsive, these cradle kits add strength and support, while offering an improved turning radius. Flaming River includes everything you need to install them, and the welded cradle bolts right into the original mounting locations--no chassis modifications needed. Kits are available with or without columns and all include wiring connectors, universal joints, shaft support bearings, Grade 8 hardware, and their patented rack and pinion cradle system. Update your Pony with comfort from the most complete rack and pinion kits--Flaming River Mustang manual cradle kits.
( 2 )
$2,157.99
—
$3,139.99
Flaming River 1967-1969 Camaro power rack and pinion cradle kits make it easy to enjoy modern comfort. These direct bolt-in steering kits feature their patented rack and pinion cradle system offering a quick steering ratio with a full turning radius! These power kits are fluid and pressure-tested and certified. Swap out your tired old system and transform your classic muscle into modern muscle you'll enjoy driving. Bolt up Flaming River 1967-1969 Camaro power rack and pinion cradle kits.
( 3 )
$2,073.99
—
$3,432.99
Flaming River 1968-72 Chevelle power rack and pinion cradle kits modernize and strengthen your current steering system. The precision JIG-welded units install with basic hand tools into your stock steering mounting holes, beefing up your rack gear and still allowing for a full turning radius. Whether you have a small or big block engine, these kits use a unique travel bar system that connects new tubular inner tie rod ends to the original pivot points to reduce bump steer. Numerous kits are available with or without a tilt column and steering pump; and most include wiring connectors, universal joints and shafting, mounting hardware, a billet swivel floor mount, and a polished aluminum mounting reservoir. Enjoy an updated steering system that's lighter and stronger with a Flaming River 1968-72 Chevelle power rack and pinion cradle kit.
( 1 )
$2,731.99
—
$4,813.99
Flaming River 1963-82 Corvette power rack and pinion cradle kits upgrade your factory steering to a more modern, better handling system. These conversion kits bolt into your existing chassis and original mounting locations with no suspension modifications. They strengthen your current system, provide full turning radius, and work with your present steering column and power steering pump. Hardware and universal joints are included. Equip your Corvette with the best performance features from Flaming River!
( 4 )
$2,469.99
Your Tri-five classic just got better with Flaming River 1955-57 Chevy manual rack and pinion cradle kits. You love your Chevy, and now you'll love driving it even more! These kits are unique, easy-to-install systems offering less weight, more strength, and a full turning radius. These Chevy kits feature their patented welded mounting cradle with a rack that bolts in place using the original chassis location, providing the reinforcement of your chassis and more ground clearance! They also include mounting hardware, a wiring connector, universal joints, and a swivel floor mount. Polished or paintable tilt columns are separate options. Whichever you choose, you're sure to enjoy driving your American classic even more! Give your classic a bit of modern technology with Flaming River 1955-57 Chevy manual rack and pinion cradle kits.
( 4 )
$2,008.99
—
$2,722.99
Replace the early long-shaft steering box in your 1962-67 Nova with Flaming River power rack and pinion cradle kits! These cradle kits mount right into the original chassis locations--no suspension modifications are needed! Flaming River Nova power kits provide a full turning radius, more responsive steering, and install using simple hand tools. You can choose kits with or without columns and for front or rear steer. The front steer reverses the OE steering arms and adds clearance for the use of almost any oil pan. Most power rack and pinion cradle kits include a power steering pump and pulley, a polished aluminum mounting reservoir, and they are pressure/fluid-tested and certified. Get a direct fit with everything you need to upgrade your classic with Flaming River 1962-67 Nova power rack and pinion cradle kits.
Not Yet Reviewed
$2,491.99
—
$3,959.99
Flaming River 1960-65 Comet/Falcon power rack and pinion cradle kits add modern steering to your classic! These conversion kits require no cutting, drilling, or welding; they simply bolt into your vehicle's original mounting holes using basic hand tools. The units provide more than 6 in. of travel and a full turning radius—and are available with a floor shift or column shift tilt steering column, or no column at all. Flaming River power rack and pinion cradle kits are fluid- and pressure-tested before shipping. Order the model recommended for your Comet, Falcon, or Mercury application. Kits include: * Rack and pinion cradle system * Mounting hardware required for installation * Wiring connector * Universal joints and shafts * Power steering pump and pulley * Polished aluminum mounting reservoir
( 4 )
$2,859.99
—
$3,534.99
Flaming River 1962-64 Galaxie rack and pinion cradle kits are designed for Ford Galaxie and other full size Fords. They provide power steering for modern driving comfort, especially when parking. The cradle mounts in the original chassis location with no chassis modification and the center support does not have to be removed. Kits are available with a choice of either paintable mill or polished stainless steel columns. Kits are available with or without a steering column. Kit includes: * Billet aluminum reservoir * Power rack and pinion cradle system * All Grade 8 mounting hardware
( 1 )
$2,396.99
—
$3,201.99
Flaming River 1955-56 Chevy Power rack and pinion cradle kits deliver precision steering on your restoration vehicle. Their Billet-Power rack and pinion systems allow for a full turning radius. They are engineered to replace the early long shaft steering box. By mounting the rack on the cradle, they not only reinforce the chassis, but also provide increased ground clearance. The true fixture-welded mounting cradle fits between the frame rails and bolts in place using the original chassis location with no suspension modification. Order the model recommended for your specific application.
( 2 )
$2,125.99
—
$3,262.99
Flaming River 1968-74 Nova Power rack and pinion cradle kits bolt into the existing chassis with no suspension modification. The power rack and pinion provides a quick steering ratio with full turning radius, installs easily using the existing chassis hole locations. They also feature a stronger 1 in. diameter rack gear and more than 6 in. of travel and full turning radius.
Not Yet Reviewed
$2,025.99
—
$2,559.99
Many late-model Jeeps are equipped with new computer controlled electro-hydraulic steering (EHPS), electronic stability control (ESC), electronic roll mitigation (ERM), and a weight-saving aluminum housing steering gearbox. PSC has taken the Jeep steering system back to the drawing board and engineered its exclusive Big Bore XD steering gearbox and a traditional belt-driven high-flow mechanical power steering pump conversion. This produces an essential upgrade to solve the undesirable factory steering performance, while efficiently handling the increased torque loads due to larger tire sizes and installing aftermarket axle assemblies. Typical benefits: * Eliminates excessive on-center steering wheel "play" * Eliminates electro-hydraulic pump overheating * Increased torque output turns tire sizes over 35 in. * Improved turning capability when locking differentials are engaged Depending on model, kits can contain: * Big Bore XD steering gearbox * High-flow mechanical pump conversion kit * Reservoir kit * Upgraded high-pressure hose assembly * Upgraded return line kit * Fluid cooler kit * SWEPCO 715 power steering fluid
Not Yet Reviewed
$3,612.99
—
$3,647.99
Flaming River Impala/Caprice power rack and pinion cradle kits help deliver precision steering on your restoration vehicle. They have a full lock-to-lock turning radius and an adjustable pinion angle. These assemblies also utilize a travel bar design to properly position the steering pivot points to the original location and turning radius. The stabilizer guide clamp provides added stability while driving. Flaming River rack and pinion systems use the factory tie rods to connect the travel bar to your vehicle's spindles. These kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—and no cutting, drilling, or welding is required. Impala/Caprice kits include: * Floor shift tilt steering column * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley
Not Yet Reviewed
$3,598.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
