Availability
Showing In Stock Items. Show All 144 Items.
SPC Performance ball joints are quality replacements for worn ball joints on your control arms. The ball joints are offered in a variety of configurations, and will work perfectly with SPC Performance control arm components. Order the SPC Performance ball joint suited to fit your application needs.
( 24 )
$176.99
—
$212.99
Has it been a while since you serviced your knuckles? Trail-Gear knuckle rebuild kits contain all standard replacement parts, including gaskets, felts, seals, washers, and shims to do the job done right. They even include outer felt covers--a Trail-Gear exclusive! If you're using your truck in the rocks you will want to replace these covers when you service the knuckles. Kits are offered with or without wheel bearings. Service your knuckles with Trail-Gear knuckle rebuild kits.
( 4 )
$127.49
—
$199.99
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$899.99
Trail-Gear pitman arms are designed from solid forged steel construction, and are ideal for use with crossover steering. Replacing your pitman arm is recommended if the original is worn-out or, in most cases, if your steering box is being changed out. These strong, extra-wide one-piece arms will allow the use of FJ80 tie rod ends. They're available in flat style or with the same drop as the factory pitman arm.
( 1 )
$110.49
—
$129.99
Rancho RS5000 steering stabilizers reduce steering shimmy, improve tire control, and give you more control over your vehicle if a tire should blow out. The single stabilizers protect front-end suspensions and are used with tires up to 35 in. tall. Dual stabilizers are for off-roaders with tires 35 in. and taller.
( 135 )
$68.99
Energy Suspension tie rod end dust boots resist damage from dirt, rocks, sand, water, road salt, and oils, while adding a colorful touch to your steering linkage. Each boot has an important 5-point sealing action that prevents contamination and loss of lubricant—the major cause of rod wear. Your factory originals are likely molded rubber, which will dry rot, crack, and split over time. Energy Suspension bushings are constructed from durable polyurethane in a variety of shapes and sizes to fit countless vehicles. Order them by the pair, the dozen, or in larger quantities!
( 130 )
$5.89
—
$6.06
Edelmann Elite power steering filters solves the shortcomings of P/S filters that came before them. They raise the bar on filtering performance to protect the power steering system from contaminates while providing coverage for over 99 percent of vehicles with hydraulic power steering. Incorporating materials such as aircraft-grade anodized aluminum, these universal power steering filters encapsulate Edelmann's Elite philosophy of delivering first-class quality problem-solving products. Connectors and hose clamps are included. Features and benefits: * High capacity stainless steel mesh filter * Larger, more powerful magnet captures additional metal fragments * Dual filtration technology captures metal and non-metallic debris * Built-in safety bypass ensure flow is not inhibited * Aircraft-grade, anodized aluminum body * Serviceable body for a lifetime of use * Easy to clean * Engineered to fight against premature power steering pump and rack failure * Works great in automatic transmission cooler lines, tool * Interchangeable connectors for 3/8 in., 1/2 in., and 5/8 in. hoses
( 4 )
$24.99
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
Cardone new rack and pinion units are built better from the start. Cardone uses what they've learned from remanufacturing, as to where--and why--original parts fail. Their engineers then incorporate improvements into the Select rack and pinions, making them better than the originals. Cardone new rack and pinion units feature: * 100 percent computerized testing at load to ensure reliable performance * All rotating and actuating components are properly hardened, ground, and polished to ensure longevity of the components and their respective seals * Cardone Select Engineered (CSE) Technology ensures that all rack and pinion/gearbox units meet or exceed OE-form, fit, and function * Computerized spool valve balancing ensures exceptional feel and return-ability * Environmentally-friendly coating provides a clean appearance and prevents rust * Supplied with OE-grade seals, O-rings, and boots to provide optimal sealing performance and longevity
( 33 )
$341.99
Clearance is the key word for off-road enthusiasts. Navigating rocks and rugged terrain leaves your thin steering mechanism vulnerable to damage--which makes Trail-Gear high steer arms invaluable to your vehicle. These pressure-forged steel brackets provide solid mounting points to raise your pitman arm and steering rods a few more inches off the ground. This additional height can mean the difference between safe adventures … or a bent and useless steering component. Trail-Gear steer arms feature tapered tie rod holes for secure contact between parts, and they compensate for angles so your rod ends can ride at the OE-standard 90 degrees. For trucks, 4Runners, Land Cruisers, and other solid front axle rides, TG high steer arms are essential equipment when you venture off the beaten path.
( 3 )
$299.99
—
$349.99
Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.
( 6 )
$359.99
—
$399.99
Trail-Gear Toyota high steer kits feature unbeatable quality at an attractive price. Crossover steering is critical for rock crawling. The stock steering just can't keep pace with today's super-flexible suspension systems. This results in broken stock steering arms and loss of steering. These kits include super-beefy, solid forged steering arms, a heavy-duty pitman arm, heavy-duty 0.250 in. wall steering rods, and rod ends. The kits are precision-fit for easy assembly.
( 3 )
$549.99
—
$749.99
SPC camber/caster bolt kits replace your non-adjustable or corroded bolts. These kits provide more adjustment to achieve the proper alignment for your application. Do you have negative camber/caster problems? Think positive! Achieve proper alignment on your vehicle with SPC camber/caster bolt kits.
( 21 )
$43.99
—
$80.99
The All-Pro Off-Road pitman arms are solid, one-piece forged steering components designed for a variety of applications—including 1980s and '90s era Toyota Independent Front Suspension (IFS) vehicles that have been converted to use a solid front axle. The arms feature a tapered hole to fit FJ80-style rod ends, which connects the steering linkage to the steering box and converts its rotation into the back-and-forth movement that steers the front wheels. * Solid one-piece forged design offers increased strength and durability * Connects to the steering gear box, translating the gear's rotation into linear movement that is transmitted to the steering linkage, ultimately turning the vehicle's wheels
( 1 )
$119.99
Old Man Emu steering stabilizers are designed to reduce the effect of wheel vibration and to improve the feel, handling, and control of the vehicle. They will also reduce the aggressive rotation of the steering wheel over rough roads, without affecting steering wheel return. OME steering stabilizers feature: * 9-stage coil spring valving for optimum performance * 15mm piston rod is stronger than the original * Steel stone guard protects the piston rod against stone damage * 35mm piston and bore provides increased oil volume * Twin tube design protects the internal components against stone damage * Multi-lip seal prevents oil loss * Utilizes original stabilizer mounts for ease of installation (where appropriate)
( 6 )
$104.95
Moog has a problem-solving heritage. Their focus has always been on improving OE products, designing easy-to-install parts, and developing leading-edge technology. Moog ball joints are no exception, helping to restore your chassis to like-new condition. Performance and durability are traits required to reach the winner's circle, and Moog offers these top-quality steering linkage components for hundreds of applications--front, rear, upper, and lower. Choose the ball joints that match your drivetrain and make/model.
( 1074 )
$32.99
—
$44.99
Problem Solver tie rod ends from Moog feature durable, all-metal construction that is not prone to failure like your stock units. These greasable tie rod ends feature M2 Technology, a design with an all-metal "gusher" bearing that allows lubricant to penetrate the bearing surfaces for longer life. Their metal stud with full-ball configuration provides 360 degrees of smooth, even, rotational movement for more responsive steering, and their exclusive double bearing allows for less preload, resulting in reduced steering effort. The tie rod ends also feature a convenient, easy-access wrench flat that allows the use of a socket for an easy installation. Order the replacement model needed for your application.
( 234 )
$24.99
Edelmann power steering filter kits can help restore your steering control and responsiveness. With over 50 years of manufacturing experience and a commitment to OE form, fit, and function, Edelmann is an ideal choice for replacement power steering filters. Additional features include the following: * Polycarbonate casing * Fits standard 3/8 inch or 10 mm power steering return lines * Internal magnet attracts the fine particles
( 3 )
$13.99
After years of development and testing, Trail-Gear fully loaded Six Shooter kits have set a new standard for Toyota knuckle strength and reliability. They totally eliminate the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker-than-stock material, and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC-machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail-Gear can deliver. These kits include a special 6-hole shim pack for use between the top of the knuckle and the steering arm assembly. A minimum of four additional steering arm studs are required for installation.
( 3 )
$419.99
—
$699.99
Trail-Gear high steer crossover steering kits get you have you crawling over the rocks in no time. Stock steering just can't do the job like flexible crossover steering. TG high steer kits outfit your rig with the unbeatable quality of super beefy, solid forged steering arms, a heavy-duty pitman arm, rod ends, and durable .250 in. wall steering rods. They offer a precision fit for easy assembly and are available with flat arm or drop pitman arm, and 4-stud or 6-stud setups. Is your steering wheel on the right? TG also offers a right hand drive! If you're tired of broken stock steering arms, make the switch to Trail-Gear high steer crossover kits.
( 1 )
$549.99
—
$649.99
Trail-Gear steering knuckle replacement components are significantly stronger than OEM standards to make the most of your newer replacement steering arms. TG should be your first choice for knuckle hardware when repairing or upgrading your high-steer system.
( 3 )
$1.99
—
$19.99
Beck/Arnley steering drag link repair kits are ideal for fixing up those worn-out OE drag links. These kits are designed to meet or exceed OE specifications, leaving you with no worries when it comes to proper vehicle fitment. Beck/Arnley uses Class A materials when manufacturing these repair kits to provide long-lasting strength.
( 2 )
$49.99
All-Pro Off-Road offers steering tie rod extensions for a variety of Toyota vehicles—including many Tacoma, FJ Cruiser, and 4Runner models. These machined steel rack and pinion extensions are great for lengthening your tie rods for +2 in. long travel applications. Order the model recommended for your ride.
Not Yet Reviewed
$39.99
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 116 )
$469.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
