Availability
Showing In Stock Items. Show All 40 Items.
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 139 )
$114.99
—
$184.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative for replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your one source for remanufactured hard parts. Remanufactured parts may look different from factory parts but perform the same because Cardone products are the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their remanufacturing processes can only be found behind the Cardone name. Additional features include: * The most advanced engineering and remanufacturing processes to provide you with high-technology replacement parts * 100 percent disassembly and component renewal to ensure that you receive reliable products * All new O-rings and lip seals ensure no leaking and long-lasting performance * 100 percent computerized testing for quality and reliability * All critical components are triple-tested to ensure product reliability * 100 percent appearance-inspected to ensure your satisfaction * Rust-inhibitive "Cool Dip" finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake, or peel * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life
( 340 )
$105.99
Lares takes care to clean their remanufactured power steering pumps thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent seals and O-rings; and the pumps are then tested to ensure proper performance. Over a thousand models are available; order the power steering pump recommended for your vehicle.
( 20 )
$105.99
—
$120.99
Made some changes? SPC Performance adjustable camber arms can make the corrections to keep your vehicle's performance at optimum level. Whether you want negative camber for the track, or are wanting to regain OE specifications after lowering, or maybe you just need adjustment on a stock vehicle, these SPC adjustable camber arms can help maximize tire life and dial-in your handling for no-pull performance.
( 36 )
$132.99
Lares remanufactured steering gears make the perfect replacement for your original equipment needs. These power steering gears are thoroughly cleaned and all exterior surfaces get reconditioned for a fresh like-new appearance. All units receive new OE-equivalent seals and O-rings, then each unit is tested to ensure proper performance. Lares also lubricates each steering gear unit, and applies a fresh coat of high-quality paint, so they come ready to install them and go! Verify the fitment and order the Lares remanufactured steering gear unit designed to fit your application.
( 59 )
$122.99
—
$249.99
Cardone engineers have meticulously designed and tested their new power steering pumps to fit and perform like the original. Building on decades of experience, each unit is supplied with premium high-temperature seals and reservoirs for easy installation and reliability you can count on. Build it better; order the Cardone new power steering pump designed to fit your application. Features and benefits: * 100 percent computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle * Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration * Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris
( 119 )
$172.99
Edelmann's power steering pumps are the result of pairing modern engineering with high-quality materials. These stock replacements are available in different attachment styles, with or without serpentine pulley, and with or without integral reservoir. Every unit has a unique Designated Numeric Asset (DNA) number permanently etched on the part and includes a matching individual test report, ensuring high standards for durability and performance. Order the model recommended for fitment on your application.
( 2 )
$232.99
These patented SPC Performance thrust alignment plate kits allow for corrections of the setback and thrust angle on most vehicles equipped with leaf springs. They install easily--just loosen up the U-bolt holding the leaf springs to the axle, install the alignment plates, and re-tighten. By including multiple sizes, the SPC Performance thrust alignment plate kits are sure to solve your problem.
( 7 )
$111.99
Clearance
Avoid costly trips to the dealership by repairing steering issues with these Dorman steering shafts. They feature precision U-joints to give your vehicle tighter, more responsive steering. Best of all, they install easily with basic hand tools. Take control of your steering with one of these Dorman steering shafts.
( 59 )
$233.99
$144.50
—
$228.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. Cardone remanufactured rack and pinion units feature all new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance. The racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life. All new O-rings and lip seals ensure no leaking and long-lasting performance. and all units are 100 percent computerized hydraulic tested for proper flow, leakage, and performance.
( 84 )
$202.50
Repair your steering gear for a fraction of the cost of a rebuilt steering box. Edelmann steering gear rebuild kits contain the seals, O-rings, gaskets, input or sector shaft bearing, and hardware parts specific to your repair. With a commitment to OE form, fit, function, and unparalleled technical support, Edelmann is your obvious choice for power steering replacement parts. Edelmann offers complete coverage, from seal kits to complete rebuild kits.
( 18 )
$133.99
Lares engineers their new (not remanufactured) power steering control valves to meet or exceed OE specifications. Each unit is hydraulically tested, and the ball joints are lubricated with high-quality grease to ensure original fit and performance. These replacements are available for a wide range of vehicles from the 1950s, '60s, '70s, and '80s. Order the model recommended for your application.
( 27 )
$235.99
Use Moog replacement center links as direct-fit parts for your steering systems. Moog replacement center links are manufactured from quality materials for strength and durability.
( 64 )
$113.99
Clearance
Lares engineers their new (not remanufactured) power steering slave cylinders to meet or exceed OE specifications. Each unit is hydraulically tested, and the ball joints are lubricated with high-quality grease to ensure original fit and performance. Models are available for hundreds of vehicles from the 1950s, '60s, '70s, and '80s. Order the replacement steering slave cylinder recommended for your application.
( 12 )
$180.99
$140.50
Clearance
The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft steering knuckles are designed and tested to Ford's rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.
( 2 )
$423.99
$152.50
Lares takes care to clean their remanufactured power steering control valves thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent seals and O-rings; then they're tested to ensure proper performance. Lares also lubricates and applies a fresh coat of high-quality paint to the valves, so all you have to do is install them and go! Verify the fitment and order the Lares remanufactured power steering control valves designed for your application.
( 17 )
$186.99
Lares takes care to clean their remanufactured power steering cylinders thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent chrome shafts, seals, and O-rings; then they're tested to ensure proper performance. Models are available for over a hundred vehicles from the 1950s, '60s, '70s, and '80s; order the replacement slave cylinder recommended for your application.
( 5 )
$144.99
Keep your alignment working like new with SPC Performance standard series ball joints. Made from top-quality materials, they are available for a variety of applications to help keep your ride's alignment as it was when it rolled off the showroom floor.
( 3 )
$126.99
These SPC Performance camber plates will help you to achieve the proper front or rear alignment. They are made of high-quality materials and are designed to be installed with no modifications. These SPC Performance camber plates are available in different styles to fix your alignment problems.
( 1 )
$185.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
