Availability
Showing In Stock Items. Show All 72 Items.
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 127 )
$143.99
—
$149.99
McGaughy's offers replacement tie rod ends for hundreds of Chevy and GMC applications from 1999 and up. Worn originals can cause shaky front wheels, misaligned or excessively worn front tires, and imprecise steering. These economical replacements will restore the handling performance you expect. Order the model recommended for your vehicle.
( 16 )
$69.99
—
$82.99
Summit Bucks
One of the most important areas of your vehicle to keep in excellent working condition is the steering. When the wheel starts shaking or feeling loose, it's time for ACDelco Gold tie rod ends. They feature full bar studs for better fitment, high-impact resistant low-friction double bearings, and attached dust boots for superior durability and life. It's a bit tough to drive a vehicle when the front tires are pointed in opposite directions. Keep your steering components properly aligned with ACDelco Gold tie rod ends. Order the model recommended for your application.
( 20 )
$137.99
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 98 )
$375.99
—
$480.99
Turn One HP1 power steering pumps are "Stage 1" upgrades over factory stock pumps and available in common GM vehicle fitments with your choice of fittings. These pumps are hand-built with proprietary pump internals specifically designed to reduce unnecessary horsepower consumption from your engine and impart less heat into your power steering system. They're ideal upgrades for vehicle owners who are fed up with pumps overheating or not providing the necessary steering assistance for their vehicles. Drive confidently with a performance HP1 steering pump from Turn One! Features include: * True Type II pump with performance modifications * Reduced horsepower consumption * Reduced fluid temperatures * 1,500 psi pressure capacity * Lightweight aluminum housing * Brand new components * Universal and application-specific models available
( 4 )
$475.00
—
$575.00
BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.
( 1 )
$979.95
—
$1,009.95
Pacific Performance Engineering Stage3 tie rod assemblies are a better option. They bolt on with no additional modifications. When it comes to steering components, failure is not an option. Featuring 1 1/2 in. wide forged tie rods, massive 2 1/3 in. ball joints, and much larger and stronger inner ball joints, Stage3 assemblies are the best of the best. They're available for fitment on dozens of applications from 2001 and up. Compared to factory components, they offer: * 30 percent larger toe adjusting shafts * 53 percent larger tie rod bodies * 35 percent larger outer ball joints * 28 percent larger inner ball joints
( 18 )
$251.99
Detroit Speed Detroit tuned steering rack and pinions have been optimized to provide an exceptional modern performance feel on the street and on the track. They're available in both standard and narrow widths that are 24.5 in. and 21.5 in., respectively. They feature valving that's specifically designed to provide the increased performance feel found in late model performance vehicles, and they're made from all-new, superior-quality components for long-lasting durability. Detroit Speed Detroit tuned steering rack and pinions come complete with polyurethane mounting bushings and have an internal inner tie rod boot balance tube. So, if you want nothing but the best when it comes to your hot rod or street musclecar, Detroit Speed Detroit tuned steering rack and pinions are your answer.
Not Yet Reviewed
$499.95
Summit Bucks
ACDelco GM Genuine Parts power steering pumps will produce the energy need for your vehicle's power-assisted steering system. These GM-recommended replacements guarantee the quality, reliability, and durability of your original equipment parts. For the best fit, form, and function in your vehicle, along with peace of mind and a hassle-free install, choose ACDelco GM Genuine Parts power steering pumps.
( 1 )
$389.99
—
$482.99
Edelmann's power steering pumps are the result of pairing modern engineering with high-quality materials. These stock replacements are available in different attachment styles, with or without serpentine pulley, and with or without integral reservoir. Every unit has a unique Designated Numeric Asset (DNA) number permanently etched on the part and includes a matching individual test report, ensuring high standards for durability and performance. Order the model recommended for fitment on your application.
( 2 )
$198.99
On Sale
Holley LS engine power steering reservoir kits feature everything you need to add a power steering fluid reservoir to any of Holley's driver side LS accessory drive brackets. They include one composite, baffled OE-style reservoir tank, one cap with a level indicator, a steel mounting bracket, a power steering pump to reservoir hose, and two hose clamps.
( 20 )
$165.95
$149.35
Moroso offers a variety of power steering tanks. They are manufactured from high-grade aluminum and are available in several styles and sizes to suit your racing needs. Help out your power steering with one of these Moroso power steering tanks.
( 43 )
$183.99
Summit Bucks
Moog offers these quality replacement pitman arms for many applications. They're built to factory specs, so you can be assured that you're getting a quality product that will help to keep your vehicle's steering as smooth as it was when it rolled off of the assembly line.
( 137 )
$49.99
—
$109.99
Summit Bucks
Moog has a problem-solving heritage. Their focus has always been on improving OE products, designing easy-to-install parts, and developing leading-edge technology. Moog ball joints are no exception, helping to restore your chassis to like-new condition. Performance and durability are traits required to reach the winner's circle, and Moog offers these top-quality steering linkage components for hundreds of applications--front, rear, upper, and lower. Choose the ball joints that match your drivetrain and make/model.
( 1063 )
$29.99
—
$41.79
On Sale
Holley has responded to the expanding LS marketplace by developing the most complete line-up of LS performance upgrades and engine swap products, including Holley LS engine power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low LS accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps will also work with Holley's special LS reservoir kit.
( 8 )
$449.95
OER steering column bearings can eliminate vibration and rotating resistance. Designed to offer support to the steering shaft, these bearings press into the bottom of the steering column tube; then the shaft runs through it. Order the factory recommended replacement to fit your application.
( 9 )
$66.99
Tuff Stuff Performance offers direct replacement power steering pumps for more than a thousand vehicle-specific applications. These economical units enable you to change out a faulty part with proper fitment and ease of installation. Most pumps have a natural or chrome finish and feature hose barb inlet attachment. Fittings are also included on some models. Order the Tuff Stuff replacement designed for your car or truck, and enjoy optimum performance from your power steering system.
( 151 )
$273.99
Summit Bucks
Problem Solver tie rod ends from Moog feature durable, all-metal construction that is not prone to failure like your stock units. These greasable tie rod ends feature M2 Technology, a design with an all-metal "gusher" bearing that allows lubricant to penetrate the bearing surfaces for longer life. Their metal stud with full-ball configuration provides 360 degrees of smooth, even, rotational movement for more responsive steering, and their exclusive double bearing allows for less preload, resulting in reduced steering effort. The tie rod ends also feature a convenient, easy-access wrench flat that allows the use of a socket for an easy installation. Order the replacement model needed for your application.
( 230 )
$38.99
LS Classic Series GM Type 2 power steering pumps help you achieve that vintage look on your LS engine-swapped classic. Intended as replacements for pumps supplied in LS Classic accessory drive kits, they can also run with a stock plastic reservoir (not included) that mounts directly to the inlet in other applications. If you're running a Mustang II rack and pinion, use these with LS Classic Series flow control valves. They deliver constant flow under operating pressures. LS Classic Series GM Type 2 power steering pump features include: * 0.662 in. shaft diameter with no keyway * Two 5/16 in. through-bolt mounting holes * 3 gpm flow rate at 1,250 to 1,350 psi * For use with GM power steering gearboxes and rack and pinion
Not Yet Reviewed
$282.95
Cardone remanufactured power steering pumps are among the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their technicians pinpoint original equipment design weaknesses by examining failed cores. You'll benefit from the Cardone expertise when you order the remanufactured power steering pump designed to fit your application. Features include: * All critical components are triple-tested to ensure reliability * All units are built with 100 percent new O-rings and premium-grade Viton® seals to prevent leaks and avoid high-temperature breakdown * Every pump is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort, and noise * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life * Units are supplied with 100 percent tested and calibrated pressure relief valves * Cardone remanufactured parts are business and environmentally friendly
( 142 )
$42.00
—
$125.99
Lares power steering reservoir caps are designed to protect the power steering fluid reservoir from debris that could damage your power steering system. If the cap is lost, cracked, or worn, you may notice power steering fluid leaking on the ground or around the engine. If the power steering fluid is black or dark brown, it could be an indication of a more serious leak from the hoses, seals, or O-rings. These quality replacements are manufactured to OE specifications to insure proper fit and function—and thread onto the top of the tank. Maintain your vehicle with quality components from Lares.
( 1 )
$5.99
Pacific Performance Engineering tie rod assemblies are overkill for some, but when it comes to steering components, failure is not an option. PPE tie rod assemblies provide incomparable strength and durability for your truck steering system. Featuring a 32 percent larger-diameter forged sleeve, 27 percent larger-diameter toe adjusting shaft, and 14 percent larger, stronger ball studs. The outer tie rod end features a spring-loaded ball-stud seat that maintains constant pressure and OEM steering knuckle taper. The inner tie rod end is adjustable through the end cap and contains a powdered metal ball seat, as well as a rubber shim for clearance compensation. Choose the PPE tie rods designed for your vehicle. Features: * Extreme duty forged steel outer tie rod body * Larger ball studs with lubrication grooves * Durable powdered metal inner bearing * Dual grease fittings, fully serviceable inner and outer joints * Weather- and abrasion-resistant TPV steering rack boot * Significant reduction in differential fluid temps * Limited lifetime warranty
Not Yet Reviewed
$215.99
You definitely know when your power steering pump fails--turning the wheel becomes a muscle-building chore. Tuff Stuff Performance offers a complete line of replacement pumps designed to look as great as they perform! The units are available in a variety of textures, finishes, and colors to set your engine bay apart from others at a car show or the race track. Manufacturing custom-finished components for hot rods and custom cars is Tuff Stuff Performance's business. Find the pump style and fitment for your vehicle, and never be without efficient power steering.
( 160 )
$192.99
—
$201.99
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 51 )
$701.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
