Availability
Showing In Stock Items. Show All 26 Items.
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 39 )
$242.99
—
$269.99
BMR torque arm relocation kits allow you to move the torque arm mount to reduce the stress on the tailshaft. These kits replace your transmission crossmember with a stronger tubular piece that also has an integrated torque arm mount. The mount itself is adjustable up and down to allow for easy "instant center" adjustment. They are made from heavy-wall DOM tubing and 1/4 in. mounting plates and hardware are also included.
( 17 )
$259.95
UMI Performance transmission mounted torque arms eliminate unwanted traction problems and transfer your power to the wheels. UMI Performance transmission mounted torque arms bolt on directly in place of the factory unit using existing mounting holes and require no drilling or welding. These torque arms are designed to eliminate wheel hop under hard acceleration and reduce 60 ft. times instantly. UMI Performance transmission mounted torque arms are supplied with a low-deflection front bushing designed to replace the stock rubber bushing and bolt in the existing clamshell. The rear torque arm mount is constructed entirely of 0.375 in. thick, CNC-machined mild steel and is fully MIG-welded. These torque arms feature on-car adjustability for easy pinion angle adjustments using a 4140 heat-treated adjuster and 3/4 in. rod ends. Additional features include: * Constructed from 1.250 in. x 0.120 in. DOM seamless steel tubing * TIG-welded 4140 chromoly tube adapters * On-car adjuster built using 4140 chromoly steel and heat-treated for maximum strength * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Rear mounting plates use 0.375 in. thick mild steel and are designed to fit stock as well as 12-bolt and 9 in. rear-end housings * Rear mounts feature solid 3/4 in. rod ends and are attached using Grade 8 hardware * Durable powdercoated finish
( 19 )
$329.99
QA1 offers replacement torque arm crossmembers for a variety of suspension conversion systems and vehicle applications. These tubular-style rear crossmembers are machined from steel with a black powdercoat finish. Hardware is included. Order the model recommended for your setup.
Not Yet Reviewed
$249.95
These UMI Performance tunnel brace torque arm mounts are designed to get the most out of your car. They are engineered to be stronger than the stock mount without adding excessive weight or bulk under your car. To make installation easy, UMI offers different offsets to clear the exhaust and specially designed them to bolt up to the factory location without needing to be welded in. These tunnel brace torque arm mounts are constructed from steel and are powdercoated to protect them from the harsh elements under your car. UMI Performances tunnel brace torque arm mounts are perfect to help you get your car off the line and down the track faster.
Not Yet Reviewed
$229.99
—
$279.99
UMI Performance offers tunnel mounted torque arm relocation kits for a variety of 1982-92 GM F-Body vehicles, including Chevy Camaros and Pontiac Firebirds. These TH350 transmission mounts come with an added bushing mount to be used with UMI's tunnel-mounted torque arm. They are the same mount supplied with UMI's 2214 tunnel-mounted torque arm setup. The mounts will also work with factory T5 5-speed transmissions. This relocation kit is the best option if you already have a UPI tunnel-mounted torque arm and are doing a transmission swap. The steel crossmembers are available in a red or black powdercoat finish.
( 1 )
$219.99
Complete your restoration project with Scott Drake! Scott Drake manufactures these frame rails from high-quality steel and paints them black to prevent corrosion. Trust in Scott Drake to get your ride back onto the open road.
( 2 )
$349.95
—
$381.95
Rust Buster frame repair sections help you replace those rusted or damaged frame rail areas on your truck or SUV. The EZ slip design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. Rust Buster uses the latest in CAD to model each repair section before it is laser-cut, formed and finish welded. Keep your ride on the road for years to come with Rust Buster frame repair sections.
( 35 )
$194.99
BMR transmission conversion crossmembers allow you to swap your choice of transmissions into your vehicle. They bolt to your OE frame points using existing mounting holes with no welding or drilling required.
( 21 )
$129.95
—
$179.95
Silver Sport transmission crossmembers are CAD-designed from heavy-duty formed and powdercoated steel. They offer strength and accuracy, two essentials of a crossmember. These SST vehicle-specific crossmembers are stiff and resistant to deflection, meeting or surpassing the original design, meaning they won't flex during hard launches or on rough roads. They are engineered to provide the proper driveline angle eliminating installation issues seen with adjustable crossmembers, as well as vibration issues and possible U-joint damage. Exhaust and ground clearance are also taken into consideration. Silver Sport transmission crossmembers locate the transmission at not only the proper height and angle, but makes sure it stays there, regardless of power, torque, or road conditions. Order the one for your specific vehicle.
( 4 )
$199.95
—
$299.95
QA1's tubular K-member for the 1982-1992 Chevrolet Camaro/Pontiac Firebird (F-body) is a significant front-end upgrade. Designed for reduced weight and increased clearance for headers and oil pans, QA1's K-members make a great upgrade for both street performance and track vehicles. QA1's engineers prioritized superior strength when designing these K-member components which reinforces the front-end unibody structure while optimizing weight savings. Unlike other K-members that lock you into a single setup, QA1 K-members offer unmatched versatility with their modular engine mounts (sold separately) that let you switch between engines and transmissions without needing a new K-member. No other K-member offers this level of adaptability, making QA1 the ultimate choice for a seamless build. The K-members offer the flexibility to be used with either coilover struts or QA1 spring sliders, depending on your performance goals. Coilover struts, like QA1's adjustable Proma Star Struts, can also provide a significant performance boost for your 3rd Gen Camaro or Firebird with the ability dial-in the perfect ride height. For those looking to achieve the perfect stance with greater negative camber, while accommodating wider wheels and tires, inboard spring sliders by QA1 are another great option. The inboard spring slider option also helps to maintain spring loads near the factory position on the QA1 K-member. Features and benefits: * Steel suspension subframe crossmember * High-strength design with powdercoat finish * The unique design of QA1's K-members allows the use of interchangeable engine mounts (sold separately) for easy engine swaps—choose from modular engine mounts (sold separately) that either allow you to reuse your existing small block engine and transmission combination or swap to a big block Chevy, or more modern LS and Gen V LT * Substantial weight savings—shedding 32 lbs. while increasing clearance and enhancing accessibility to the front of your car, this is an ideal upgrade! * Compatible with QA1' spring sliders or QA1's coilover struts (sold separately) * You can make your driveline swap even easier by using QA1's transmission crossmembers and torque arms (both sold separately) * Bolt-in installation—QA1's commitment to thoughtful product design is evident in their fully bolt-in kits, providing an easy installation process Fitment Notes: Must use QA1 lower control arms (sold separately). Not compatible with factory coil springs. Must use QA1 coilover struts or QA1 spring slider kit (both sold separately). Engine mounts sold separately.
Not Yet Reviewed
$734.95
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$119.95
—
$449.95
Steeda's full-length subframe connectors are perfect for daily drivers or serious cars with high-horsepower, sticky tires or a competition suspension. Steeda starts with beefy 1.5 x 2 in. square tubing that spans the full length of the floor pan, providing unmatched chassis rigidity, improved handling, and improved ride quality with reduced impact harshness. Steeda's subframes are reinforced at each bend and include Steeda's exclusive torque box reinforcing plate for the strongest attachment possible to the rear subframe for maximum effectiveness. Steeda's full-length subframe connectors also feature a one-piece reinforced seat bolt cross brace. Steeda's cross braces have reinforcing gussets built in for greater strength with less welding, making for an easier installation experience. These Steeda full-length subframe connectors come with all mounting point tabs pre-welded to the subframe connectors. They come available in bare steel or black powdercoated finishes.
( 4 )
$233.99
Transmission crossmembers help to distribute and maintain the forces and torque that result from the output of the engine and transmission. As time passes, ageing, exposure to the elements, etc., corrosion can set in creating a dangerous situation. Luckily, with a combined 45 years of experience, the Rust Buster engineering staff have a solution. Their transmission crossmembers will help to maintain your truck or SUV's structural integrity and keep it powering through the roads for years to come. By utilizing the latest in scanner solutions and CAD software, Rust Buster transmission crossmembers are designed and built, capturing all the correct contours and guaranteeing a perfect fit and an easier installation on your vehicle. Put an end to your rust issues with Rust Buster. Select the crossmember designed for your vehicle. Features: * Made from heavy-duty 11-gauge steel * Protective oil coating prevents oxidation during shipping * Back by a Lifetime Warranty * Transmission support plate (where applicable) * Welding required (where applicable) * OEM hole locations * Class 10.9 hardware (where applicable)
Not Yet Reviewed
$199.99
—
$349.99
On Sale
It's a known fact; during acceleration, cornering, and braking your chassis will flex and twist. The more power you add or the stiffer the suspension, the worse it becomes. All this movement uses up valuable horsepower, decreases handling characteristics, and reduces ride quality. So why spend time and money improving your engine and suspension when it's attached to a flaccid frame? Stifflers Suspension F-150 chassis stiffening systems bridge the front and rear sections of the F-150 frame to significantly increase its stiffness and reduce the twisting and bending caused by suspension inputs and drivetrain torque. The systems are designed for ease of installation with minimal drilling--all other mounting locations use existing holes. Stifflers F-150 chassis stiffening systems are complete with integrated brackets for optional driveshaft safety loops (sold separately). So what does this mean for you? * Straighter launches * Less wasted horsepower * More responsive suspension tuning * Improved handling under cornering and braking * Better ride quality * Fewer squeaks and rattles NOTE: Other manufacturers' long bars cannot be used with these systems.
Not Yet Reviewed
$549.95
$494.96
Rough Country frame stiffener gussets add strength and rigidity to your UTV. These easy-to-install solutions help to eliminate the bending of your lower frame tabs by reinforcing that heavily torqued area. Rough County gussets can prevent your stock frame from deforming under extreme riding conditions while also acting as a protective skid plate. Featuring durable 3/16 in. steel construction, Rough Country frame gussets can significantly improve the rigidity of your front end, making them ideal additions for larger tires that increase torque load or for extreme off-road conditions that could otherwise damage your UTV. Each gusset is laser-cut for a precise fit to your vehicle and features a long-lasting powdercoat finish designed to withstand the elements.
Not Yet Reviewed
$49.95
Richmond Gear transmission crossmember spacers are ideal for manual 6-speed overdrive applications. These accessories are machined from steel for longevity and performance. Richmond is the leading manufacturer of professional quality, high performance drivetrain products—from ring and pinion sets for serious street and racing apps, to torque-hungry manual transmissions and components. Trust the brand and parts that have been winners for decades at the Daytona 500 and U.S. Nationals.
Not Yet Reviewed
$161.99
UMI Performance transmission crossmembers are designed for late model F-bodies. These crossmembers are built using 0.120 in. rectangular tubing, 0.188 in. mild steel mounting plates, and a 0.375 in. thick transmission mount. These crossmembers are powdercoated bright red or gloss black and include new mounting hardware.
( 5 )
$149.99
Detroit Speed weld-on subframe connectors join your front subframe and rear frame rails to increase your car's stiffness. These uniquely designed DSE connectors are fabricated from thick-wall rectangular steel tubing. They are bent and TIG-welded in a fixture for accuracy and repeatability. Unlike others, these DSE subframe connectors are barely visible from underneath the car, offering maximum ground clearance. Plus, they won't interfere with seat attachment hardware or the installation and removal of the rear leaf spring pocket. And, your molded factory carpet will still fit over the subframe connectors. Detroit Speed weld-on subframe connectors can be installed on convertibles and are supplied with templates, pictures, and detailed instructions for installation.
( 1 )
$283.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
