Availability
Showing In Stock Items. Show All 5 Items.
Make your IFS stock upgrade a natural conversion with Heidts Mustang II crossmember kits. They are precut and pre-fitted, so you'll have no measuring, no grinding, no trimming, and no mistakes! Heidts crossmember kits are ready to install when you are. Main crossmembers are constructed from only two formed pieces for maximum strength with an accurate fit and feature the strong design of vertical inner uprights offering twice the weld area to keep your frame from twisting. Crossmembers and spring towers with built-in anti-dive are pre-welded to fit your frame and one-piece shock cups are TIG-welded in place. Kit components may vary by application, but most include all of the special, hard-to-make brackets and mounts that you need to complete the install. Heidts kits retain the original suspension to give you the correct design, correct camber action, and no bump steer! Everything is pretty much done but the installation--that, you'll have to do yourself! But never fear--Heidts Mustang II crossmembers include a step-by-step, fully-illustrated instruction book to walk you through your install.
( 8 )
$591.00
Get up to 3 in. higher than the rest of the world with one of our Summit Racing™ 7800000 Series body lift kits. The kits raise your truck's body off of its frame with reinforced nylon lift blocks (rated at 50,000 lbs. per square inch), and include such components as CNC-machined splined steering extensions (where required), bumper brackets (most applications), and zinc plated Grade 5 hardware to complete the installation.
( 50 )
$190.99
—
$446.99
Get up to 3 in. higher than the rest of the world with one of these Performance Accessories body lift kits. The kits raise your truck's body off of its frame with reinforced nylon lift blocks (rated at 50,000 lbs. per square inch). They include such components as CNC-machined splined steering extensions (where required), bumper brackets (most applications), and zinc plated Grade 5 hardware to complete the installation.
( 37 )
$141.00
—
$170.00
OER Authorized bolt-in IFS conversion kits are available for 1947-54 GM pickups with a V8 engine. The kits will improve your vehicle's ride, handling, and performance. These steel crossmember kits convert your antiquated stock front suspension and steering box to a more modern 1974-78 Mustang II or 1974-80 Pinto/Bobcat setup. Enjoy better handling with the addition of rack and pinion steering and twice the suspension travel when compared to stock. Combine this advancement in steering and suspension with the added benefit of modern braking power, and this setup becomes a no-brainer. The bolt-in kit is designed for use on 1947-54 Chevy 1/2 ton or light-duty 3/4 ton frames, and will drop the ride height approximately 2 1/2 to 3 in. using stock Mustang II front spindles. Lower control arm pivot tubes and gussets are not included in this kit. (A weld-in crossmember it is also available, if preferred.) Specs: * Bolt-in components. No welding required * Proven Mustang II geometry * Can use stock 1974-78 Mustang II or 1974-80 Pinto suspension components, except control arms. * Requires tubular control arms (strut-less style lowers) * Interlocking bolt-in boxing plates reinforce frame for strength * Requires power steering rack * Stock spindles will drop ride height 2-1/2" - 3 inches * Will work with small block or big block Chevy engines * Not for use with air-ride front ends Note: Additional items may be needed to complete installation, including but not limited to tubular control arms, spindles, coilover springs/shocks, rack and pinion steering, tie rods, calipers, rotors, inner tie-rod extensions. Important: Lower control arms need to be level with the ground (with all the weight on the vehicle) for correct steering geometry.
( 1 )
$405.99
Clearance
Performance Accessories premium lift systems are designed to raise your vehicle with a combination high-quality body lift and leveling kit, allowing the vehicle to run larger diameter tires. The systems include: high-pressure fiberglass-reinforced nylon lift blocks; 3/16 in. thick laser-cut and powdercoated bumper relocation brackets; a CNC- machined and zinc plated steering extension; high-strength hardware; extension brackets; and urethane wheel-well extensions (Gap Guards) that conceal any gaps between the body and frame. Now you can add lift and larger wheels and tires using one of these Performance Accessories premium lift systems!
Not Yet Reviewed
$210.65
$147.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
