Availability
The 1967-69 F-body was designed in an era when high performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-on subframe connectors offer a simple and effective solution to this common issue. They tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance—especially during cornering, acceleration, and braking. The tubular design connects the front Camaro/Firebird subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Additional details: * Included solid body mounts and hardware further reduce chassis flex. Their aluminum construction offers a noise-free alternative to polyurethane. * Thoughtful design: The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. * Easy bolt-in installation makes the upgrade hassle-free. * Fitment notes: Does not fit convertibles.
( 1 )
$535.95
—
$629.95
Already have a QA1 coil-over conversion system on your C10? QA1 C10 crossmember retrofit kits add powered rack and pinion steering, offers 2 in. of additional drop range (up to 8 in. total), and saves an additional 70 lbs. of weight. These bolt-in upgrades improved drivability and steering feel while achieving the perfect stance. Choose the kit for your model year. Features and benefits: * Powered rack and pinion steering -- Provides quicker and tighter steering, plus increased steering angle when fitting larger wheels and tires and improve geometry for enhanced drivability. * Improved ground clearance -- The tubular design makes your under cab rails the truck's lowest point. Updated lower shock mounts add clearance and new upper shock mounts increase travel for a great ride and performance, even at lower ride heights * Compatible with existing QA1 coilover systems -- Easily swap out a few components on your existing QA1 shocks and control arms, allowing you to upgrade your truck in stages, starting with coilovers and control arms * Easy, bolt-in installation -- The crossmember comes powder coated and ready to install, no cutting or welding your frame. It easily locates the steering rack, and you can choose mounts (sold separately) for common engines.
( 1 )
$2,333.95
—
$2,450.95
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$669.99
—
$1,566.96
Classic Performance 1962-67 Chevrolet Nova front subframe kits are one of the most beneficial upgrades available for your first generation Nova. By eliminating the factory strut rods and adding adjustable forward control arms, they add stability, align-ability, improved steering response, and over 2 in. of additional ground clearance. They can accommodate both factory and aftermarket sway bars with up to 1 in. diameters and feature a unique 1-piece crossmember that ties both frame rails together by bolting in where the factory strut rod mounts were located. No cutting or welding required, the installation is all bolt-in. Kits include: * 2 one-piece, 1 1/4 in., 0.120 wall DOM tubular lower control arms with Classic Performance premium ball joints * Bolt-in, 1/4 in. thick steel crossmember * Four alignment cam kits * Grade 8 mounting hardware * Low-friction, long-life bushings * Optional upper control arm bushings
( 15 )
$838.99
One of the most effective ways to improve the stiffness and handling of your vehicle is to box the factory chassis. Hellwig Frame FX kits makes it easy for you. Rather than taking considerable time with measuring, cutting, and fitting steel panels these kits simplify the process effectively. Some vehicles have an open C-channel chassis that's only 3 in. wide at the top and bottom. This design is inherently weak in handling torsion and marginal in bending. Frame FX kits double the width of the tension side of the frame rail and close the area for dramatic increases in torsional and bending stiffness. They're comprised of 14 pre-cut 10-gauge steel panels matching the thickness of the factory frame--and fit into the weak points of the factory chassis. Hellwig engineered another panel that adds an extra mount to tie the floor to the chassis, furnishing even more strength to the entire car. In addition, brackets are provided to mount the transmission crossmember, with enough adjustment to accommodate nearly any drivetrain configuration. The increased strength via Hellwig Frame FX kits results in improved handling and ride quality, while retaining the factory chassis and mounting points.
( 20 )
$674.99
—
$784.99
Summit Racing™ Cummins conversion crossmembers are specifically designed for installing a Cummins 6BT into your 1973-87 Chevy 4WD truck or 1973-91 4x4 Suburban. These drop conversion units often eliminate the need for a lift kit. They're a direct bolt-in, utilizing OEM hole locations, yet still allow room for drilling and adding additional bolts for increased rigidity. The crossmembers are made from high-quality steel with a black powdercoat finish. It's a fact—any conversion can be tricky. Thankfully, Summit Racing™ offers the correct components to help you get the job done right!
( 5 )
$226.99
Strengthen your transmission support and reduce the weight of your vehicle with Summit Racing™ lightweight transmission crossmembers. Through advanced design and manufacturing, these crossmembers are stronger than standard boxed-steel transmission crossmembers, while weighing an average of 35-percent less. The crossmembers are a direct bolt-in and do not require any additional brackets or adapters to complete the installation. They also allow you to run a true dual-exhaust system with most popular GM transmissions and do not affect ground clearance. The welded design with clear powdercoat finish gives these lightweight crossmembers a fabricated look that's sure to complement your ride. Order the model recommended fit your application.
( 13 )
$305.99
—
$436.99
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 25 )
$369.95
—
$1,169.00
Reinforce your late-model Ford chassis with Steeda S550 Mustang rear IRS subframe support braces. These chromoly steel aftermarket stabilizers connect three key points on either side of the undercarriage: the rocker panel, the front mount of the rear suspension subframe, and the rear mount of the lower control arm. This adds much-needed rigidity and overall control of the vehicle. Steeda braces will limit twisting and vibrations for improved cornering, less wheel hop, and no additional noise. The stiffeners use existing holes in the chassis, and require no modifications—installation takes about an hour with regular shop tools. Leave the factory bracket in place; these subframe braces offer twice the support. Enjoy better handling and a safer ride with a pair of Steeda S550 Ford Mustang rear IRS subframe support braces.
( 11 )
$349.95
California Pony Cars AOD conversion installation kits are designed to convert your 289/302/351W engine from a C4 or C6 transmission to an automatic overdrive transmission. Order the kit designed for your Mustang year/application. AOD conversion installation kits include: * Crossmember * Trans-mount insulator * Slip yoke * Kick-down cable * Flexplate * AOD shift linkage * Throttle return spring bracket on select kits Note: California Pony Cars AOD conversion kits do not include actual AOD transmission and may require additional parts.
( 5 )
$731.99
Alston Racing bolt-on subframe connectors are carefully formed to fit the contour of your vehicle's stock unit body floor. No cutting or welding is required for installation, allowing you to retain your stock exhaust, fuel, and brake lines. In about four hours, you can preserve the consistency and performance of your uni-body chassis. Additional features of Alston Racing bolt-on subframe connectors include: * Easy installation * Complete with Grade 8 hardware and instructions * Powdercoated to ensure long life and good looks * Can also be welded in
( 24 )
$297.00
—
$356.00
The more improvements you do to the vehicle, the more demands are put on the body. These Global West subframe connectors provide additional support to increase the integrity of the chassis. They are a must for any performance application. They're built out of round 1 5/8 in. x .125 in. wall roll cage tubing. The construction attaches to the factory support rails located directly under the front seats. The rear portion of the subframe attaches to the rear leaf spring mount and frame rail. Additional gussets are included in the kit, which add support to the rear spring mount. Welding is required for installation.
( 97 )
$138.40
—
$499.58
UMI Performance bolt-on 3-point subframe connectors increase chassis stiffness, performance capabilities, and overall drivability. Their setup is designed to tie the front and rear subframes together, adding additional cross-bracing throughout the center of the vehicle and protecting it to its fullest, while keeping ground clearance issues to a minimum. This spider web effect greatly improves your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Additional features include: * Constructed from 1.750 in. x 0.120 in. DOM mild steel tubing * 3-point brace uses 1.250 in. x 0.095 in. DOM mild steel tubing * Front mounting points feature 0.250 in. thick mild steel mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * MIG-welded construction * Durable powdercoated finish
( 10 )
$499.99
—
$659.99
Replace your heavy stock K-member with one of these tubular QA1 Mustang K-members and, in addition to the weight savings, you'll get better steering geometry, less bump steer, reduced dive under braking, and quicker straight-line performance. Ideal for street performance, autocross, pro touring or drag racing, they easily bolt onto factory components without any wheel or tire fitment changes. Features and benefits include: * All mounting points are digitally-indexed from new factory K-members * Made from high-quality, American-made, high-strength, low-alloy steel (HSLA) steel * Weighs only 25 lbs.--over 50 percent lighter than stock K-members * Increased header and oil pan clearance for easier maintenance and installation * Modular design for versatility--bolt-in engine mounts can easily be swapped for future engine changes * Improved geometry--maintains optimum anti-dive and minimizes bump steer with selectable rack height and optimal control arm positioning * Ideal for Mustangs with a lowered stance * Retain the factory wheel base Note: For best results, QA1 control arms are strongly recommended
( 31 )
$459.95
—
$567.95
Stifflers Suspension web braces tie together their full-length subframe connectors and stiffening rails, creating the ultimate in chassis stiffening! A key component in their 1979-2004 modular FIT Systems, these individual black powdercoated steel frames provide a structurally engineered web network for additional strength and stiffness. Their installation is easy with the included Slide-2-Size mounting brackets. Stifflers Suspension web braces feature: * Slide-2-Size mounting; simply slide bracket into place and weld, for a custom fit every time * Design optimized using CAD/CAE software combined with real-world test data * Made of 1 in. x .065 in. tubing to maximize stiffness and strength while reducing weight * TIG-welded for superior strength * Considerably increased side impact safety * Works with any aftermarket square or rectangular full-length subframe connectors * Engineered for no loss of ground clearance and no need to relocate fuel or brake lines * No floors to cut or interior to remove * Pre-masked areas for welding require no removal of powdercoat before installation * Industrial-grade powdercoated for long life
( 2 )
$284.95
BMR Suspension IRS subframe support brace systems are designed for use with late model S550 Mustangs and compatible with stock bushings or BMR's popular cradle lock-out kit. This bracing adds additional rigidity to the independent-rear-suspension-to-chassis mounting, as well as additional reinforcement to the subframe itself. It achieves this by tying in to the front leg of the subframe where leverage is reduced. A super heavy-duty plate locks in beneath your sway bar mounts and gets tied into the rear bushing mount. Reinforce the weak points on your 6th generation Mustang for improved performance with a BMR Suspension IRS subframe support brace system. Features, items, and specs: * 4-piece independent rear suspension (IRS) bracing system * Reduces IRS movement and assembly deflection * Compatible with BMR and other IRS modifications/mounting solutions * Zero decrease in ground clearance * Extremely easy bolt-on installation * Reinforces critical areas of the IRS subframe by reducing leverage * High-quality hardware for installation included
Not Yet Reviewed
$239.95
UMI Performance Road Race K-Members are designed for serious racers who expose their vehicles to more stress than any street cars will ever experience. Using an additional 1.000 in. of tubing, UMI Performance Road Race K-Members tie together crucial areas. They weigh in at 3 lbs., more than UMI's standard version, but still maintain a much-needed weight savings.
( 3 )
$819.99
—
$999.99
Competition Engineering formed rear frame rails adds some beef to your suspension. The "chassis people" have designed and manufactured these to replace the stock sheet metal rear rails in your subframe equipped car. CE's rails are mandrel-formed 2 in. x 3 in. x .083 in. wall mild steel tube that will increase the chassis strength for quicker vehicle reaction times. Plus, they have been engineered to move the leaf springs and frame rails inboard to provide additional tire clearance. Strengthen your suspension to put more power to the pavement utilizing a pair of Competition Engineering formed rear frame rails. Additional information: * Designed to fit stock floor contours with minor fabrication * Requires use of a fuel cell, rear fenderwells and an upper shock crossmember * Use with Competition Engineering weld-in subframe connectors * Two rails and hardware per kit
( 16 )
$416.99
—
$461.99
UMI Performance tubular subframe connectors are designed to tie the front and rear subframes together using bolt-in hardware supplied and they require no welding! Subframe connectors improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Their setup tucks tightly against the floor using strong tubing, causes no ground clearance loss, and cannot be seen from the side of the vehicle. Additional features include: * Constructed from chromoly or mild steel tubing * Front mounting points feature 0.250 in. thick mild mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * Tubular design allows for a tighter fit against the vehicle's undercarriage * Uses rear control arm mount for increased strength and ensures proper installation * MIG-welded construction * Durable powdercoated finish
( 39 )
$249.99
—
$349.99
Competition Engineering has made it easy to connect a fabricated rear frame to the rest of the chassis. These dropped crossmembers are made of mandrel-formed 2 in. x 3 in. x .083 in. wall steel. They are a durable addition to CE's formed rear frame rails, or any other suitable rear frame rail kit.
( 5 )
$199.99
Steer Smarts offers Yeti XD track bars for a variety of applications. They're fully adjustable on the vehicle and are designed to be the strongest track bar available. Available for front or rear, in black or red. Additional details: * Easy bolt-on installation * Works on stock height (no lift) up to a 6.5 in. lift * E-coated and powdercoated for a long-lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components to eliminate interferences * Forged from 2 in. steel for greater buckling, impact, and fatigue strength * Designed to correct track bar geometry * Includes all necessary installation hardware
Not Yet Reviewed
$325.00
—
$399.00
Keep your Mustang's factory pinch weld seams pristine when you install a set of BMR chassis jacking rails. This easy bolt-on upgrade utilizes the existing stock mounting points without welding, cutting, or extra modifications required on Fastback models for a clean, straightforward installation. They provide additional jacking points along the entire length of the rail, and prevent possible damage to undercarriage pinch welds. These jacking rails are made from heavy-duty, square tubular steel for superior strength and rigidity—and feature a durable powdercoat finish for great looks and long-lasting corrosion resistance. BMR Suspension chassis jacking rails work well with jack stands, floor jacks, and two post lifts.
( 16 )
$119.95
—
$169.95
Rough Country offers body lift kits for a variety of applications, including many Chevy, GMC, and Jeep models. They provide from 1 in. to 3 in. of lift and additional tire clearance, as opposed to stock height. From simple polyurethane block spacers … to all-inclusive kits with fiberglass-reinforced nylon body pucks, hardware, and accessories, these body lift components increase ground clearance while retaining the noise and vibrating canceling characteristics of factory mounts. Some kits include front and/or rear relocation brackets. Order the kit designed for your vehicle.
Not Yet Reviewed
$89.95
—
$379.95
Reduce overall chassis flex on your musclecar with the addition of Heidts subframe connectors. They will improve your chassis's integrity and provide a solid foundation for the rest of your performance enhancements. Don't let your musclecar get out of shape. Keep it solid and fit for the winding road ahead with Heidts subframe connectors.
( 7 )
$322.00
—
$373.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
