Availability
Showing In Stock Items. Show All 20 Items.
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 584 )
$208.99
—
$349.99
Trans-Dapt Performance crossmembers eliminate the need to fabricate a rear crossmember. Their vehicle-specific transmission crossmembers are available as kits, with braces and mounting pads, or as the crossmember alone. Position your engine and transmission properly and exactly where you need them with quality, durable crossmembers from Trans-Dapt.
( 111 )
$82.99
—
$311.99
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$352.95
$183.95
—
$449.95
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 38 )
$269.99
On Sale
Get your LS engine installed properly using one of these Hooker transmission crossmember extension brackets. They are manufactured from quality materials and bolt in place for an easy installation. The brackets are available for different types of transmissions, so they're sure to have you covered.
( 4 )
$45.36
—
$46.56
Eliminate the hassle of fabricating a rear crossmember, and position your engine and transmission where you want them, with Trans-Dapt Performance universal transmission mounts. They'll support most standard and automatic transmissions with open channel frames and widths of 26 in. to 36 in. between the frame rails. With 0.114 in. wall thickness, they're available with no drop, 3 in., and 6 in. drops, either as kits with braces and mounting pads or as the crossmember alone.
( 48 )
$169.99
—
$204.99
QA1 offers replacement torque arm crossmembers for a variety of suspension conversion systems and vehicle applications. These tubular-style rear crossmembers are machined from steel with a black powdercoat finish. Hardware is included. Order the model recommended for your setup.
Not Yet Reviewed
$239.95
QA1 transmission crossmembers provide an easy bolt-in option to simplify a transmission swap and even give you more space for your performance exhaust. When swapping a GM engine into a Mustang, for instance, GM transmission crossmembers are required to bolt in the transmission. Unless otherwise noted, a polyurethane transmission mount and mounting hardware are included. Order the model designed to fit your application.
( 2 )
$251.95
UMI Performance transmission crossmembers are designed for late model F-bodies. These crossmembers are built using 0.120 in. rectangular tubing, 0.188 in. mild steel mounting plates, and a 0.375 in. thick transmission mount. These crossmembers are powdercoated bright red or gloss black and include new mounting hardware.
( 5 )
$129.99
—
$349.99
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$380.95
$247.95
—
$449.95
Strengthen your transmission support and reduce the weight of your vehicle with Summit Racing™ lightweight transmission crossmembers. Through advanced design and manufacturing, these crossmembers are stronger than standard boxed-steel transmission crossmembers, while weighing an average of 35-percent less. The crossmembers are a direct bolt-in and do not require any additional brackets or adapters to complete the installation. They also allow you to run a true dual-exhaust system with most popular GM transmissions and do not affect ground clearance. The welded design with clear powdercoat finish gives these lightweight crossmembers a fabricated look that's sure to complement your ride. Order the model recommended fit your application.
( 13 )
$329.99
American Powertrain X-Factor crossmembers offer half the weight of traditional crossmembers—with all of the strength. Designed to fit with most muscle car platforms and the latest transmissions, X-Factor aluminum crossmembers are 1,000 hp strong and feature a powdercoat finish for added durability. They're available for a variety of vehicle and transmission applications.
( 34 )
$249.95
—
$289.96
Hooker Super Competition engine swap transmission mount kits are available for Chevy, Chrysler, and Ford small block and big block engines. These strong mounts are designed from steel and are engineered to provide you with an exact fit and a simple installation. Hooker Super Competition engine swap mount kits are the mounts of choice when matched with the appropriate engine swap.
( 10 )
$449.95
Hooker transmission crossmember spacers are designed as part of a fully-engineered LS swap mounting system—and for compatibility with an aftermarket polyurethane transmission mount or stock replacement rubber mount of equivalent installed height. Machined from aluminum, these spacer only kits (bolts not included) will help facilitate installation of a GM 4L60-4L70 transmission into any LS-swapped 1968-72 A-body utilizing Hooker transmission crossmembers.
( 4 )
$45.36
Belltech crossmembers are designed to exceed OEM load specifications and are direct replacements for the factory units. A gain of 2.25 in. of clearance is achieved. Belltech low-profile design crossmembers reduce the risk of bottoming on extremely lowered trucks.
( 3 )
$289.00
BMR torque arm relocation kits allow you to move the torque arm mount to reduce the stress on the tailshaft. These kits replace your transmission crossmember with a stronger tubular piece that also has an integrated torque arm mount. The mount itself is adjustable up and down to allow for easy "instant center" adjustment. They are made from heavy-wall DOM tubing and 1/4 in. mounting plates and hardware are also included.
( 17 )
$259.95
Transmission crossmembers get the power under your vehicle's hood to the tires on the ground. Correctly locating and supporting your transmission can help make that happen, as well as achieving the proper driveline angles to avoid possible issues in your drivetrain. Bowler Performance provides several crossmember designs to fit a variety of engines and Tremec transmission combinations (some will work with any transmission, including automatic units). Bowler crossmembers are easy to install, offer strong steel construction, a durable black powdercoating, and most include hardware. They are designed to allow the use of stock height or half-height body bushings and the use of dual exhaust. Choose the crossmember designed for your vehicle/engine/transmission setup.
Not Yet Reviewed
$384.99
Hooker Blackheart transmission crossmember spacers have been comprehensively designed for use with Hooker Blackheart transmission crossmembers used in specific GM LS engine or Ford Coyote engine swap applications. When used as instructed, these transmission mount adapters will provide engine/transmission inclination angles which are designed to provide optimized U-joint working angles and component clearances. Features include: * Allows installation of GM 4L60/4L70, Tremec TKO 500/600, or TR3550 transmissions in multiple engine swap applications using Hooker Blackheart engine mounting brackets and transmission crossmembers * CAD modeled to provide optimal fitment and strength * Provides powertrain inclination angles required to ensure compatibility with other Hooker Blackheart engine swap components * Includes attaching hardware
Not Yet Reviewed
$70.05
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
