Availability
Showing In Stock Items. Show All 61 Items.
On Sale
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 592 )
$407.99
$242.09
—
$457.99
Trans-Dapt Performance crossmembers eliminate the need to fabricate a rear crossmember. Their vehicle-specific transmission crossmembers are available as kits, with braces and mounting pads, or as the crossmember alone. Position your engine and transmission properly and exactly where you need them with quality, durable crossmembers from Trans-Dapt.
( 111 )
$85.99
—
$311.99
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$418.95
$164.95
—
$399.95
UMI Performance boxed weld-in subframe connectors are necessary chassis upgrades when racing and hard driving habits are present. UMI Performance boxed weld-in subframe connectors greatly improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter-panel flexing. Subframe connectors essentially tie the front and rear steel subframes together, resulting in a stiffened and strengthened chassis, allowing for better weight transfer and improved traction when launching. When strength is a concern, square tubing has greater torsion resistance over tubular designs. They will work with all aftermarket exhaust systems and will not affect ground clearance. Their weld-in style requires no bolts to tighten and offer less chance of flex when compared with bolt-in types.
( 23 )
$425.26
—
$449.99
On Sale
Summit Racing™ frame brace kits are designed to easily install and strengthen the factory frame of your classic car or truck. The benefit of stiffening the frame is improved handling and a tight predictable feel. Reinforce your chassis and create a custom pro touring style, corner carving ride with these Summit Racing™ frame brace kits. *Constructed From DOM tubing *Computer Designed, Machined, and Bent *Welding Required for most kits *Adjustable transmission crossmember for Manuals or overdrives included *Generous openings for Dual Exhaust pipe routing *Exhaust hangers provided
( 67 )
$1,299.98
On Sale
Summit Racing™ Cummins conversion crossmembers are specifically designed for installing a Cummins 6BT into your 1973-87 Chevy 4WD truck or 1973-91 4x4 Suburban. These drop conversion units often eliminate the need for a lift kit. They're a direct bolt-in, utilizing OEM hole locations, yet still allow room for drilling and adding additional bolts for increased rigidity. The crossmembers are made from high-quality steel with a black powdercoat finish. It's a fact—any conversion can be tricky. Thankfully, Summit Racing™ offers the correct components to help you get the job done right!
( 5 )
$226.99
$204.29
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$699.99
—
$1,566.96
Key Parts wheel tubs are original equipment, factory-style body panels suited for a professional restoration project. Over the years your original wheel tubs can become rusted, dented, cracked, or scratched, especially on classic vehicles that take the most beating from rain, road salt, dirt, and debris. Key Parts offers wheel tubs that are based on original specifications and dimensions—or you can get the extended width tubs, which are 4 in. wider than stock tubs to make room for wider tires! That makes stuffing those big wheel tire combinations much easier and driver friendly. The tubs EDP coating ensures a long-lasting durable finish for transport and storage, and they are ready for standard prep work prior to installation and paint for show quality results. Repair or replace rusted wheel tub body panels with high-quality, affordable reproduction wheel tubs from Key Parts. Order the wheel tubs for your application needs.
Not Yet Reviewed
$196.99
The 1967-69 F-body was designed in an era when high performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-on subframe connectors offer a simple and effective solution to this common issue. They tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance—especially during cornering, acceleration, and braking. The tubular design connects the front Camaro/Firebird subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Additional details: * Included solid body mounts and hardware further reduce chassis flex. Their aluminum construction offers a noise-free alternative to polyurethane. * Thoughtful design: The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. * Easy bolt-in installation makes the upgrade hassle-free. * Fitment notes: Does not fit convertibles.
( 1 )
$599.95
UMI Performance front reinforcement braces reduce squeaks and rattles common with the GM G-body platform. This welded steel tubing will stiffen the front frame horns and front crossmember area, and no drilling is required for installation. Grade 8 hardware is included to easily bolt the triangular brace onto your chassis. UMI front reinforcement braces are designed and manufactured with pride, and are available in your choice of powdercoat colors.
( 11 )
$293.76
—
$298.77
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$375.95
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 38 )
$269.99
Hooker Super Competition engine swap transmission mount kits are available for Chevy, Chrysler, and Ford small block and big block engines. These strong mounts are designed from steel and are engineered to provide you with an exact fit and a simple installation. Hooker Super Competition engine swap mount kits are the mounts of choice when matched with the appropriate engine swap.
( 10 )
$449.95
UMI Performance tubular front steering braces, also known as the Wonder Bars, are designed to tie the front right and left subframes together. UMI Performance tubular front steering braces bolt directly under the front sway bar, stiffening the front frame and resulting in improved handling, cornering, and overall performance. The steering braces strengthen the chassis, taking stress from the steering box area, which is well known as a weak area on any third-generation F-body. The steering braces are constructed from 0.250 in. 1018 mild steel CNC-machined mounting points and 1.250 in. DOM steel tubing with a 0.120 in. wall that is fully MIG-welded for extreme strength and lasting performance.
( 38 )
$99.99
Alston Racing bolt-on subframe connectors are carefully formed to fit the contour of your vehicle's stock unit body floor. No cutting or welding is required for installation, allowing you to retain your stock exhaust, fuel, and brake lines. In about four hours, you can preserve the consistency and performance of your uni-body chassis. Additional features of Alston Racing bolt-on subframe connectors include: * Easy installation * Complete with Grade 8 hardware and instructions * Powdercoated to ensure long life and good looks * Can also be welded in
( 24 )
$356.00
Bolster your street machine with UMI Performance adjustable strut tower braces. Easy to install, these braces offer an inexpensive modification with big benefits. Connecting the front strut towers makes your chassis stronger and fortifies your suspension. You'll feel the improved handling and quicker response in and out of corners. Plus, you'll be able to tweak the braces for a custom fit for your ride. Manufactured in the USA, UMI adjustable braces are crafted from mild steel tubing with CNC-machined 3/16 in. thick mounting plates and 4130 chromoly tube adapters and heavy-duty rod eyes. Strengthen your chassis for improved performance with UMI Performance adjustable strut tower braces.
( 29 )
$159.99
—
$239.99
Summit Racing™ keeps you on track for racing with our 9 in. Ford Grand National rear-end housings. Fabricated for Circle Track performance, these housings offer quality at competitive pricing. Summit Racing™ Grand National rear-end housings are built with .188 in. wall DOM steel tubes and CNC-machined Grand National snouts, and then the axle tubes are turned for the easy installation of birdcages and suspension mounts. The housing comes with either new stamped or reconditioned centers, plugs, bungs, carrier studs, and steel differential covers. Or, choose metric GM mounts for your IMCA stock car. Get ready to race with the quality and value of Summit Racing™ 9 in. Ford Grand National rear-end housings. .
( 2 )
$775.99
Goodmark frame rails are pre-bent to fit your specific vehicle application. They're manufactured from high-quality steel and are available with a natural finish or EDP coating. These replacements are offered in a wide range of configurations for classic cars and trucks from the 1960s, '70s, and '80s. For repair or restoration, order the model (and position) recommended to fit your vehicle.
( 7 )
$161.99
—
$225.99
Eliminate the hassle of fabricating a crossmember and position your engine where you want with these universal crossmember motor mounts from Trans-Dapt. They'll support most small and big block engines and feature different frame rail widths for different engine applications. The crossmember motor mounts are available with or without the motor mount pads.
( 32 )
$98.99
—
$132.99
Detroit Speed weld-on subframe connectors join your front subframe and rear frame rails to increase your car's stiffness. These uniquely designed DSE connectors are fabricated from thick-wall rectangular steel tubing. They are bent and TIG-welded in a fixture for accuracy and repeatability. Unlike others, these DSE subframe connectors are barely visible from underneath the car, offering maximum ground clearance. Plus, they won't interfere with seat attachment hardware or the installation and removal of the rear leaf spring pocket. And, your molded factory carpet will still fit over the subframe connectors. Detroit Speed weld-on subframe connectors can be installed on convertibles and are supplied with templates, pictures, and detailed instructions for installation.
( 1 )
$579.95
Allstar Performance GM metric chassis trailing arm bracket kits have what you need. Complete kits include the rear upper and lower control arm mounts. (The upper mounts must be cut to the desired height, depending upon where your housing is located in the chassis.) They're available in styles for different vehicle applications. Multi-hole lower mount brackets are available apart from the kit, if desired.
( 2 )
$59.99
—
$129.99
Get up to 3 in. higher than the rest of the world with one of these Performance Accessories body lift kits. The kits raise your truck's body off of its frame with reinforced nylon lift blocks (rated at 50,000 lbs. per square inch). They include such components as CNC-machined splined steering extensions (where required), bumper brackets (most applications), and zinc plated Grade 5 hardware to complete the installation.
( 37 )
$160.00
The 3rd Gen Camaro and Firebird are known for having a weak and flexible steering box area. To address flex and improve handling, a steering brace, also known as the Wonder Bar from QA1, is available. These tubular components bolt directly above the front sway bar, tying the front subframes together. Installing a QA1 Wonder Bar helps stiffen the front frame, reducing stress on this weak point. This translates to improved steering response to your vehicle with benefits like sharper handling, improved cornering, and overall better vehicle performance. Features and benefits: * Tubular construction strengthens the front chassis * Thoughtful design—the QA1 Wonder Bar installs cleanly between the sway bar and frame rails, maintaining a factory appearance without compromising ground clearance * Bolt-in installation makes the upgrade hassle-free Fitment Notes: Please be aware that 1982-1984 cars may need to slot existing mounting holes.
Not Yet Reviewed
$99.95
Heidts strut tower braces provide easy-to-install handling upgrades. Available in 2-point models connecting both strut towers, or 3-point models connecting both strut towers and firewall—Heidts strut tower braces reduce front end flex for better handling through corners. Order the braces designed to fit your make and model.
( 3 )
$152.00
—
$272.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
