Availability
Showing In Stock Items. Show All 33 Items.
On Sale
Hooker Super Competition engine swap transmission mount kits are available for Chevy, Chrysler, and Ford small block and big block engines. These strong mounts are designed from steel and are engineered to provide you with an exact fit and a simple installation. Hooker Super Competition engine swap mount kits are the mounts of choice when matched with the appropriate engine swap.
( 10 )
$449.95
$403.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$183.95
—
$449.95
$101.95
—
$403.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$359.95
—
$399.95
$219.95
—
$342.85
On Sale
Strengthen the front end suspension on your vintage car—with a big assist from Scott Drake. These export braces are designed to tie in the shock towers to the firewall, reducing fatigue, cracking, and twisting of the chassis. Scott Drake manufactures these braces right from the original Ford blueprint, and they feature the correct deep draw stampings for added strength and an excellent fit. The steel shock and strut braces are available in a variety of finishes to complement your particular vehicle.
( 50 )
$84.49
—
$194.95
$76.04
—
$107.95
On Sale
Custom laser-cut Hurst tunnel patches are used when installing an aftermarket transmission conversion into your classic car. These shifter tunnel floor panels are made from steel and pre-formed to fit your specific application.
( 10 )
$124.95
$112.45
On Sale
Scott Drake transmission crossmember bars will make your conversion solid and safe. Dropping a T5 into your classic Mustang will definitely deliver more driving fun—and these bars are manufactured from strong steel to support your choice. Make the swap and enjoy dependable reinforcement with Scott Drake transmission crossmember bars installed.
( 11 )
$193.95
—
$207.95
$174.55
—
$187.15
On Sale
Lowering your truck is cool, but when you do, where are you going to put the exhaust--under the frame? You'll run out of room, real quick. Well, Brothers Trucks has the solution in their crossmember exhaust brackets. These kits include meaty steel components--brackets, bolts, and template—that allow modification of the factory trailing arm crossmember for dual exhaust. They are ideal options if you don't want to remove the crossmember and still be able to tuck the exhaust up inside the frame, and they are the perfect solution for someone that doesn't have access to a welding machine. The provided metal template allows perfect alignment for the bolt holes and exhaust cut out. It utilizes an existing hole in the crossmember to locate the template, then insert one of the supplied bolts, clamp in place, and mark the remaining holes for drilling. For the center hole, the hole in the template is larger to allow a plasma torch to be used as a guide, but if you don't have a plasma torch other means, such as a hole saw, can still be used to cut the hole. Get more clearance for exhaust without weakening your truck's frame when utilizing Brothers Trucks crossmember brackets. Features: * Exhaust tailpipes fit through the holes in the frame for easier installation and more ground clearance when adding dual exhaust * Fits rear wheel drive trucks with trailing arm and coil spring rear suspension * Steel construction * Allows up to 3 in. dual exhaust system * Includes two pre-welded cut-out pieces, drilling template, and Grade 8 fasteners
Not Yet Reviewed
$154.95
$139.45
On Sale
Complete your restoration project with Scott Drake! Scott Drake manufactures these frame rails from high-quality steel and paints them black to prevent corrosion. Trust in Scott Drake to get your ride back onto the open road.
( 2 )
$380.95
—
$381.95
$342.85
—
$343.75
On Sale
Hooker transmission crossmember spacers are designed as part of a fully-engineered LS swap mounting system—and for compatibility with an aftermarket polyurethane transmission mount or stock replacement rubber mount of equivalent installed height. Machined from aluminum, these spacer only kits (bolts not included) will help facilitate installation of a GM 4L60-4L70 transmission into any LS-swapped 1968-72 A-body utilizing Hooker transmission crossmembers.
( 4 )
$45.36
$40.82
On Sale
Scott Drake Monte Carlo bars present high performance developed by Carroll Shelby. Designed to stop shock tower flex and maintain proper wheel alignment during hard cornering, the extra support of these braces will also help prevent shock tower stress cracks. Monte Carlo bars are copied from the original design and feature thicker diameter tube, plus improved fender brackets. Scott Drake has stamped square holes in the top of each fender bracket to allow for the use of lower-profile carriage bolts. You may choose options of curved or straight in steel construction—and a choice of finishes, or stainless steel. They also offer curved race versions that feature .975 in. diameter tubing and are equipped with Heim joints for smoother operation. Order the shock and strut brace designed for your specific vehicle application.
( 52 )
$42.79
—
$141.95
$38.51
—
$127.75
On Sale
Improve the handling of your vehicle by installing a Drake strut tower brace. Designed to reduce strut tower flex by adding extra stiffness that will transmit weight between the two strut assemblies, helping to keep your tires firmly on the ground for increased traction during hard cornering. They offer a simple bolt-on installation.
( 27 )
$427.95
$384.95
On Sale
Whoa--strength and style! Kentrol strut rod kits will hold up your hood with beautiful stainless steel. No worries here about working under your hood when it's propped up with these strong rods. Be confident when you lift your Jeep hood supported by Kentrol strut rod kits.
( 1 )
$57.99
$49.29
On Sale
Brothers Trucks steel, U-shaped frame reinforcement kits add extra strength and reinforce your sagging or corroded frame rails. These raw steel panels measure 17 inches long and fit perfectly inside the odd-sized GM frame rails. Designed not to interfere with the factory wiring or plumbing lines, they can be bolted or welded in place. For long bed owners who have shortened their chassis, these stiffeners provide added reinforcement to restore the frame's integrity. Bring back the glory of your classic truck or SUV with an assist from Brothers Trucks frame reinforcement kits.
Not Yet Reviewed
$78.55
$70.70
On Sale
Get your LS engine installed properly using one of these Hooker transmission crossmember extension brackets. They are manufactured from quality materials and bolt in place for an easy installation. The brackets are available for different types of transmissions, so they're sure to have you covered.
( 4 )
$45.36
—
$270.95
$40.82
—
$243.85
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$277.95
—
$749.95
$228.95
—
$425.95
On Sale
Scott Drake frame rails are made of high-quality steel to give the original appearance and strength to your Mustang when installed. They are inner and outer pieces that run from the firewall out and are available for several different models. If you're restoring your vehicle and need new frame rails, Scott Drake has you covered.
( 2 )
$94.19
—
$299.95
$84.77
—
$269.95
On Sale
Scott Drake offers replacement transmission crossmembers for a variety of applications. These hard-to-find steel support braces are made for all 1967-70 Mustangs and Cougars with either the 390 or 428 engine and C6 transmission.
Not Yet Reviewed
$81.15
$73.04
On Sale
Scott Drake offers the body parts you need to restore or repair your Mustang. Their steel replacement rear crossmembers have an EDP coating to last longer. Whether you're repairing a rear-end accident or rust damage, Scott Drake replacement rear crossmembers provide the ultimate solution.
Not Yet Reviewed
$39.23
$35.31
On Sale
Whiteline body lift kits are a quick and easy way to lift a standard height dual or single cab 4WD vehicle and still maintain the standard suspension. Each lift kit has been put through its paces to ensure the lift application maintains a safe working height for the vehicle's standard suspension. Choose the kit designed for your vehicle.
Not Yet Reviewed
$256.88
$231.19
On Sale
Sometimes your vehicle's performance can begin to feel loose, or tired, as the miles go up. Whiteline strut tower braces will stiffen up your ride like it was in its teens again. They prevent slackness in steering performance by strengthening the towers. This gives the chassis less flex and twist, providing a nice stiff frame for improved handling, no matter the type of driving. Keep your chassis tight with Whiteline strut tower braces, designed to firm up suspension and handling for any driving style.
( 14 )
$178.88
—
$312.88
$160.99
—
$281.59
On Sale
The front of a Jeep Wrangler YJ has a lot of room between the grille and front bumper, which fits a winch nicely, but if you're not hardcore off-road savvy, it's a barren wasteland. Spice it up with Kentrol frame covers. Made from 410 polished stainless, these covers add long-lasting shine and great looks, while covering the frame rails and open area. They need only minor care to stay shiny and bright, the material will not rust, and they are non-magnetic. Let Kentrol frame covers make your YJ shine.
Not Yet Reviewed
$73.99
—
$119.99
$62.89
—
$101.99
On Sale
Whiteline chassis braces upgrade your car's performance. Your stock brace is merely stamped lightweight steel, but Whiteline rear chassis braces are heavy-duty boxed steel reinforcements. The stiffeners are designed to assist in absorbing load and reducing the force on the panhard. Reduce stress and increase performance with the addition of Whiteline chassis braces. Order the model tailored for your vehicle application.
Not Yet Reviewed
$183.88
$132.67
On Sale
Whiteline differential drop kits fitted to lifted vehicles correct CV shaft angles and eliminate the potential issue of popping or breaking a driveshaft. In turn, wear on CV boots will be reduced and each kit provides provision for fitting the original protection bash plates. Whiteline kits include spacers, bolts, washers, and nuts.
Not Yet Reviewed
$160.88
$144.79
On Sale
Hooker Blackheart transmission crossmember spacers have been comprehensively designed for use with Hooker Blackheart transmission crossmembers used in specific GM LS engine or Ford Coyote engine swap applications. When used as instructed, these transmission mount adapters will provide engine/transmission inclination angles which are designed to provide optimized U-joint working angles and component clearances. Features include: * Allows installation of GM 4L60/4L70, Tremec TKO 500/600, or TR3550 transmissions in multiple engine swap applications using Hooker Blackheart engine mounting brackets and transmission crossmembers * CAD modeled to provide optimal fitment and strength * Provides powertrain inclination angles required to ensure compatibility with other Hooker Blackheart engine swap components * Includes attaching hardware
Not Yet Reviewed
$70.05
$63.05
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
