Availability
Showing In Stock Items. Show All 34 Items.
Steer Smarts delivers their most extreme steering linkage--Yeti XD Series linkage equipped with their Griffin XD attenuator. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for a Jeep. Steer Smarts Yeti XD top mount drag links for a high-steer or drilled-out OE knuckle was designed to be a complete bolt-on for Jeep JKs that have already been modified for a flipped draglink. They install in just minutes and bolt to a sleeved factory knuckle or high-steer knuckle hole and the factory pitman arm hole. They are available with red or black bellows. Select the drag link designed for your Jeep. Features: * Yeti XD/Griffin XD assembly: -- Easy bolt-on installation -- Engineered for proper clearance with chassis components, eliminating interferences * Ball joints: -- 30mm 2 1/2-ton ball joints designed specifically for specific Jeep model -- Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Drag link ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long term serviceability -- Forged from medium carbon high-hardened steel and heat-treated for even greater buckling, impact, and fatigue strength. -- Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Griffin XD attenuator: -- Reduces harsh and negative feedback to your steering wheel -- Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength -- Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Internal threads and tube are also e-coated for long term serviceability
Not Yet Reviewed
$699.00
The 1967-69 F-body was designed in an era when high performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-on subframe connectors offer a simple and effective solution to this common issue. They tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance—especially during cornering, acceleration, and braking. The tubular design connects the front Camaro/Firebird subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Additional details: * Included solid body mounts and hardware further reduce chassis flex. Their aluminum construction offers a noise-free alternative to polyurethane. * Thoughtful design: The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. * Easy bolt-in installation makes the upgrade hassle-free. * Fitment notes: Does not fit convertibles.
( 1 )
$535.95
—
$589.95
Replace your heavy stock K-member with one of these tubular QA1 Mustang K-members and, in addition to the weight savings, you'll get better steering geometry, less bump steer, reduced dive under braking, and quicker straight-line performance. Ideal for street performance, autocross, pro touring or drag racing, they easily bolt onto factory components without any wheel or tire fitment changes. Features and benefits include: * All mounting points are digitally-indexed from new factory K-members * Made from high-quality, American-made, high-strength, low-alloy steel (HSLA) steel * Weighs only 25 lbs.--over 50 percent lighter than stock K-members * Increased header and oil pan clearance for easier maintenance and installation * Modular design for versatility--bolt-in engine mounts can easily be swapped for future engine changes * Improved geometry--maintains optimum anti-dive and minimizes bump steer with selectable rack height and optimal control arm positioning * Ideal for Mustangs with a lowered stance * Retain the factory wheel base Note: For best results, QA1 control arms are strongly recommended
( 31 )
$593.95
QA1 HD Pro rear drag 4-link kits are built to put down serious power! Streamlining the fabrication process, these systems deliver professional-grade results and performance in a convenient, easy-to-order kit. They are designed for the hardcore, discerning, do-it-yourself racer looking for a no-compromise solution to take their vehicle to the next level in performance and adjustability. Offered with or without QA1's MOD Series 4-way adjustable coilover shocks, or 7 in. travel, track-proven single or double adjustable coilover shocks, each kit contains high-quality, MIG-weldable components to ensure a safe and properly engineered design that can be easily adapted into many drag racing setups. A components kit is also offered without coilover shocks and lateral locating device. Find convenience, safety, and performance all in a QA1 HD Pro rear drag 4-link system. Select the kit best suited to your drag race suspension setup. Features, benefits, and contents: * Drag race-style 4-link design: -- Performance and adjustability -- Wide range of instant center tuning and on-car adjustability -- Components can be cut to length -- 40 in. or narrower frame rails * 1/4 in. thick plates * 1 1/4 in. diameter, 22 in. length trailing arm tubes * Grade 8 hardware * QA1 chromoly rod ends * 40 in. shock crossmember and mounting tabs * 40 in. diagonal link kit with mounting brackets (not in components kit)
Not Yet Reviewed
$696.95
California Pony Cars AOD conversion installation kits are designed to convert your 289/302/351W engine from a C4 or C6 transmission to an automatic overdrive transmission. Order the kit designed for your Mustang year/application. AOD conversion installation kits include: * Crossmember * Trans-mount insulator * Slip yoke * Kick-down cable * Flexplate * AOD shift linkage * Throttle return spring bracket on select kits Note: California Pony Cars AOD conversion kits do not include actual AOD transmission and may require additional parts.
( 5 )
$731.99
Steer Smarts delivers their most extreme steering linkage--Yeti XD Series linkage equipped with their Griffin XD attenuator. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for a Jeep. Adding a top-mounted drag link to your Jeep was a daunting task, to say the least. But Steer Smarts patented reverse taper mount changed that, making the task a simple process. Steer Smarts YETI XD drag links are completely bolt-on—even the top-mount links, installing in just minutes, bolting to the factory tapered knuckle hole and the factory pitman arm hole. Steer Smarts Yeti XD drag links with Griffin XD attenuator are available in bottom-mount or "No Drill" top-mount versions with red or black bellows. Select the drag link designed for your Jeep. Features: * Yeti XD/Griffin XD assembly: -- Easy bolt-on installation -- Engineered for proper clearance with chassis components, eliminating interferences * Ball joints: -- 30mm 2 1/2-ton ball joints designed specifically for specific Jeep model -- Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Drag link ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long term serviceability -- Forged from medium carbon high-hardened steel and heat-treated for even greater buckling, impact, and fatigue strength. -- Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Griffen XD attenuator: -- Reduces harsh and negative feedback to your steering wheel -- Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength -- Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Internal threads and tube are also e-coated for long term serviceability
( 1 )
$699.00
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 25 )
$529.95
—
$689.95
Make your axles more robust; swap a 1-ton front or rear axle into your Jeep with Artec Industries axle swap kits. They provide a heavy-duty truss and bracket system designed to take serious abuse and reinforce your entire axles. The components are precision CNC-cut and bent, all the necessary brackets are included, and the overall low-profile design means your axles are stronger, sleeker, easier to install, and less likely to interfere with vehicle components.
Not Yet Reviewed
$604.99
Alston Racing standard Pro-Link 4-link suspension kits feature DOM tubing that gets internally threaded at both ends, and integral large wrench flats make adjustments incredibly easy. The link tubes get tapped to receive 5/8 in. bore x 3/4 in. shank rod ends (sold separately.) Alston Racing Pro-Link 4-link suspension kits provide the no-compromise, state-of-the-art components you need to win! Additional product features, items, and notes include: * 1.000 in. x 0.156 in. wall DOM tubing * Link tubes * Brackets and hardware * Welding is required
Not Yet Reviewed
$562.00
BMR subframe connectors are some of the strongest in the industry. Their innovative design ties together key structural points across the floorpan, minimizing flex. BMR subframe connectors are fabricated from heavy-duty, rectangular tubing for frame rigidity and improved handling ability.
( 65 )
$609.95
—
$669.95
Steeda "Stop the Hop" Street Starter kits help you eliminate wheel hop and stay within your budget. These kits contain the best three components to rid your Mustang of this menace, provide the fundamental foundation for ultimate traction and suspension compliance, and address the issues with factory IRS subframe mounting. Want to "Stop the Hop"? Get a Steeda Street Starter kit. Kit components: * IRS subframe alignment dowel kit -- Fills the factory bolt hole voids with CNC-machined Delrin® inserts that will square up the rear subframe to the chassis and limit side-to-side and front-to-back movement of the subframe that is present under hard acceleration and braking. * IRS subframe bushing support system -- Patented 8-piece kit designed and made in-house from billet 6061 aluminum and features stainless steel hardware. Fills all the factory voids in the IRS subframe mounting locations, preventing up-and-down movements of the subframe. * IRS subframe support braces -- Made in-house from chromoly steel, these 5-point braces with a simple bolt-in design support the factory subframe by directly tying it into the chassis at key mounting locations, utilizing factory mounting locations on the factory frame. They support the front factory mount and the lower control arm mount as well. Kit benefits: * Eliminate wheel hop while not increasing NVH * Eliminate subframe movement * Simple installation * Squares subframe to the chassis * No permanent modifications
Not Yet Reviewed
$599.95
One of the most effective ways to improve the stiffness and handling of your vehicle is to box the factory chassis. Hellwig Frame FX kits makes it easy for you. Rather than taking considerable time with measuring, cutting, and fitting steel panels these kits simplify the process effectively. Some vehicles have an open C-channel chassis that's only 3 in. wide at the top and bottom. This design is inherently weak in handling torsion and marginal in bending. Frame FX kits double the width of the tension side of the frame rail and close the area for dramatic increases in torsional and bending stiffness. They're comprised of 14 pre-cut 10-gauge steel panels matching the thickness of the factory frame--and fit into the weak points of the factory chassis. Hellwig engineered another panel that adds an extra mount to tie the floor to the chassis, furnishing even more strength to the entire car. In addition, brackets are provided to mount the transmission crossmember, with enough adjustment to accommodate nearly any drivetrain configuration. The increased strength via Hellwig Frame FX kits results in improved handling and ride quality, while retaining the factory chassis and mounting points.
( 20 )
$669.99
—
$784.99
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$699.99
—
$729.99
UMI Performance bolt-on 3-point subframe connectors increase chassis stiffness, performance capabilities, and overall drivability. Their setup is designed to tie the front and rear subframes together, adding additional cross-bracing throughout the center of the vehicle and protecting it to its fullest, while keeping ground clearance issues to a minimum. This spider web effect greatly improves your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Additional features include: * Constructed from 1.750 in. x 0.120 in. DOM mild steel tubing * 3-point brace uses 1.250 in. x 0.095 in. DOM mild steel tubing * Front mounting points feature 0.250 in. thick mild steel mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * MIG-welded construction * Durable powdercoated finish
( 10 )
$619.99
—
$659.99
Lose some weight and gain some space with AJE Suspension Mustang tubular K-members. With steel components, your Mustang's front-end will receive K-member suspension technology to make your car that much better than stock. Available with or without engine mounts, AJE Suspension K-members are powdercoated black for exceptional, lasting good looks and will work with factory A-arms and springs with bolt-on perches. Remove some weight and add some strength to your pony with aftermarket AJE Mustang tubular K-members.
( 43 )
$535.99
Rust Buster comes in with a solution better than the Factory OEM crossmember. The spare tire crossmember is a crucial component designed to enhance the structural integrity of your vehicle's rear frame, ensuring that your spare tire is securely held in place. This repair piece serve as a faithful OE replacement, preserving the authenticity of your vehicle's design while elevating its overall structural integrity. Designed as a bolt-on part, installation is straightforward and hassle-free. Each crossmember is meticulously engineered and features mounting location holes that are slotted for optimal fitment for the perfect blend of strength and durability. For added protection against rust and corrosion, this support piece comes with a rust-preventative oil coating, ensuring your investment stands the test of time. Drive with confidence, knowing your spare tire is securely supported with the quality and precision of a spare tire crossmember by Rust Buster. Order the model for your make/model.
Not Yet Reviewed
$599.99
—
$679.99
Make your IFS stock upgrade a natural conversion with Heidts Mustang II crossmember kits. They are precut and pre-fitted, so you'll have no measuring, no grinding, no trimming, and no mistakes! Heidts crossmember kits are ready to install when you are. Main crossmembers are constructed from only two formed pieces for maximum strength with an accurate fit and feature the strong design of vertical inner uprights offering twice the weld area to keep your frame from twisting. Crossmembers and spring towers with built-in anti-dive are pre-welded to fit your frame and one-piece shock cups are TIG-welded in place. Kit components may vary by application, but most include all of the special, hard-to-make brackets and mounts that you need to complete the install. Heidts kits retain the original suspension to give you the correct design, correct camber action, and no bump steer! Everything is pretty much done but the installation--that, you'll have to do yourself! But never fear--Heidts Mustang II crossmembers include a step-by-step, fully-illustrated instruction book to walk you through your install.
( 8 )
$591.00
Artec Industries' new JK heavy-duty crossmembers are designed to give your Jeep Wrangler JK better protection beneath the vehicle than the stock unit. Designed using CAD files directly from the manufacturer, these heavy-duty reinforcements ensure that you have a great fit with factory components. Made from CNC-cut and formed 1/4 in. thick steel, the JK heavy-duty crossmembers will hold up to plenty of off-road abuse. They enable you to mount longer arms for greater stability and flex. All nuts are pressed into the brackets for easy removal and installation; the crossmembers use 2.625 in. wide joints or bushings with 9/16 in. holes; they're shipped bare so you can custom finish it however you want. Order the model recommended for your Jeep application.
Not Yet Reviewed
$571.99
Artec Industries JK/JL/JT 1-ton APEX front Super Duty swap kits are stronger in design, lighter in weight, and easier to install. The patent-pending APEX trusses take these features to a whole new level along with precision fitment, and complete axle protection. Available with three different styles of upper control arm brackets, the kits contain upper and lower control arm mounts, shock mounts, anti-sway bar mounts, track bar mount, bump stop pads, and coil spring mounts. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs mean less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * OEM location upper control arms mount to an ultra-high clearance differential bridge that hugs the shape of the casting (bushing or Johnny Joint option) * Truss extends under coil buckets all the way to inner C for end-to-end rigidity * Multi-piece truss design means smaller packaging with easy installation * Using a 1-ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Heavy-duty track bar bracket can slide to multiple positions for steering geometry fine tuning * Shock brackets have been moved up and out (compared to JK OEM position) for a slightly higher clearance lower control arm bracket
Not Yet Reviewed
$593.99
Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits feature patent-pending trusses that go to a whole new level of strength, weight savings, simplicity of installation, precision fitment, and complete axle protection. Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits are advanced truss and bracket systems which can be used for AAM 14-bolt 10.5 in. ring gear. The kits provide the factory link, track bar, spring, anti-sway bar, bump stop pads, and shock locations all encompassed in an axle tube reinforcing truss system. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * Lightweight yet strong ... only 42 lbs. total * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * 2-piece truss design means smaller packaging with easy installation * Using a 1 ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Save hours of installation time with the built-in axle tube truss which is quicker to weld than individual brackets * Track bar mount includes four locations for those who have aftermarket lifts. Stock height hole is not included though * Coil spring locator is machined from solid steel making welding to bracket quicker than previous tube and cap-style locators * Shock brackets have been moved up for a slightly higher clearance lower control arm bracket * Easily upgradeable for future link geometry changes. Just trim off factory location upper control mounts and weld on a center link mount
Not Yet Reviewed
$604.99
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$549.95
—
$749.95
Ridetech subframe connectors add rigidity to your vintage vehicle's chassis and improve performance by reducing chassis flex. Modern tires and aftermarket suspension components are pushing the limits of OEM chassis designs. Ridetech's subframe connectors offer simple bolt-on reinforcement to significantly increase the performance of the chassis and dramatically transform the handling and ride quality. Connectors are fabricated from 1.5 in. x 3 in. x .125 wall steel for high strength, then bathed in a durable powdercoat finish for long-lasting, high-quality appearance. Order the pair recommended for your muscle car application.
( 12 )
$625.00
—
$695.00
Hotchkis Sport Suspension weld-on subframe connectors strengthen the chassis of your unibody to increase cornering and straight line performance. They're engineered to provide maximum ground clearance, while reducing annoying rattles and squeaks.
( 51 )
$549.99
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 161 )
$573.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
