Availability
Showing In Stock Items. Show All 9 Items.
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$699.99
—
$729.99
UMI Performance bolt-on 3-point subframe connectors increase chassis stiffness, performance capabilities, and overall drivability. Their setup is designed to tie the front and rear subframes together, adding additional cross-bracing throughout the center of the vehicle and protecting it to its fullest, while keeping ground clearance issues to a minimum. This spider web effect greatly improves your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Additional features include: * Constructed from 1.750 in. x 0.120 in. DOM mild steel tubing * 3-point brace uses 1.250 in. x 0.095 in. DOM mild steel tubing * Front mounting points feature 0.250 in. thick mild steel mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * MIG-welded construction * Durable powdercoated finish
( 10 )
$585.27
—
$659.99
QA1 HD Pro rear drag 4-link kits are built to put down serious power! Streamlining the fabrication process, these systems deliver professional-grade results and performance in a convenient, easy-to-order kit. They are designed for the hardcore, discerning, do-it-yourself racer looking for a no-compromise solution to take their vehicle to the next level in performance and adjustability. Offered with or without QA1's MOD Series 4-way adjustable coilover shocks, or 7 in. travel, track-proven single or double adjustable coilover shocks, each kit contains high-quality, MIG-weldable components to ensure a safe and properly engineered design that can be easily adapted into many drag racing setups. A components kit is also offered without coilover shocks and lateral locating device. Find convenience, safety, and performance all in a QA1 HD Pro rear drag 4-link system. Select the kit best suited to your drag race suspension setup. Features, benefits, and contents: * Drag race-style 4-link design: -- Performance and adjustability -- Wide range of instant center tuning and on-car adjustability -- Components can be cut to length -- 40 in. or narrower frame rails * 1/4 in. thick plates * 1 1/4 in. diameter, 22 in. length trailing arm tubes * Grade 8 hardware * QA1 chromoly rod ends * 40 in. shock crossmember and mounting tabs * 40 in. diagonal link kit with mounting brackets (not in components kit)
Not Yet Reviewed
$662.95
Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits feature patent-pending trusses that go to a whole new level of strength, weight savings, simplicity of installation, precision fitment, and complete axle protection. Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits are advanced truss and bracket systems which can be used for AAM 14-bolt 10.5 in. ring gear. The kits provide the factory link, track bar, spring, anti-sway bar, bump stop pads, and shock locations all encompassed in an axle tube reinforcing truss system. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * Lightweight yet strong ... only 42 lbs. total * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * 2-piece truss design means smaller packaging with easy installation * Using a 1 ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Save hours of installation time with the built-in axle tube truss which is quicker to weld than individual brackets * Track bar mount includes four locations for those who have aftermarket lifts. Stock height hole is not included though * Coil spring locator is machined from solid steel making welding to bracket quicker than previous tube and cap-style locators * Shock brackets have been moved up for a slightly higher clearance lower control arm bracket * Easily upgradeable for future link geometry changes. Just trim off factory location upper control mounts and weld on a center link mount
Not Yet Reviewed
$604.99
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these tubular K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
Not Yet Reviewed
$699.99
UMI Performance weld-on 3-point subframe connectors increase chassis stiffness, performance capabilities, and overall drivability by adding UMI Performance's new 3-point style subframe connectors. They are designed to tie the front and rear subframes together and add additional cross-bracing throughout the center of the vehicle, protecting it to its fullest, while keeping ground clearance issues to a minimum. This spider web effect greatly improves your car's handling ability and reduces T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road race, as well as drag race setups. Connecting the front and rear subframes allows for better weight transfer, improved traction, and straighter launches. These subframe connectors are available in either a weld-on or bolt-in setup.
Not Yet Reviewed
$599.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
