Availability
Showing In Stock Items. Show All 67 Items.
On Sale
Due to recent customer demand Trail-Gear now offers adjustable panhard brackets to allow for different levels of drop to fine-tune your suspension. The brackets are laser-cut from steel and formed and includes four sets of holes to mount the panhard to provide users more freedom in mounting suspension. Shipped unfinished and un-welded, these brackets can be easily trimmed down to the desired length. Welding required for installation. For a well-aligned suspension, use Trail-Gear adjustable panhard mounts.
( 1 )
$29.99
$25.49
Front coil springs need control arms to center the axle evenly under the vehicle, while driving down the road or flexing over obstacles. RT Off-Road control arm brackets are designed with extra steel around the mounting holes, where stock units are prone to failure. In order to dial-in the caster, these brackets use a slotted bolt design. Front coil springs make for a comfortable ride—and with sway bar disconnects, they have incredible flex, too. Keep your Jeep's front axle from getting out of whack with RT Off-Road control arm brackets. They're available for a wide range of applications, from 1984 and up.
( 1 )
$44.99
These Bilstein shock reservoir mounting brackets are designed to mount the shock reservoir to the mounting body of the other shock. They are manufactured from aluminum and are black anodized for durability.
( 14 )
$42.00
Summit Racing™ brake line tab and hose adapter kits are perfect when you're running a custom brake line setup. Each kit provides you with frame mounting tabs, hard line to flexible hose adapters, and retaining clips to plum your brake lines from the frame to suspension and axles.
Not Yet Reviewed
$23.97
Summit Bucks
ACDelco GM Genuine Parts differential bushings replace the weak, broken bushings that isolate the differential housing from its mounting point. If your car has high mileage, it likely has worn-out differential bushings. GM Genuine Parts rubber/steel bushings eliminate the fatigue and stress that can cause cracking of the differential housing. Order the OE replacement recommended for your General Motors application.
( 1 )
$20.99
—
$26.99
These Tin Soldier Racecars scalloped ribbon strips are a lightweight version of TSR's classic steel double-sided mounting strips. They can be used to mount carbon, aluminum, titanium, or any other panels to your chassis. Dimensions: 46.5 in. long, .045 thick steel, 10 oz. weight.
Not Yet Reviewed
$28.99
Replace your worn or damaged upper control arms with new ones! Allstar Performance upper control arm mounts are flame-cut from 1/2 in. thick steel. They feature 6 in. bolt spacing, weld to the frame, and will accept an upper A-frame.
( 2 )
$21.99
Clearance
RJays offers a variety of chassis and suspension fabrication components, including frame mounting tabs. These steel brackets are available in different configurations and mounting hole options. They are especially useful on vintage Ford vehicles.
Not Yet Reviewed
$44.99
—
$45.79
$26.50
AFCO Racing upper arm mount plates offer you a secure mounting point with optional adjustment points. They are flame-cut from high-quality 3/8 in. thick steel and feature 6 in. bolt hole centers. If you're building a vehicle for the track, then you'll need one of these AFCO Racing upper arm mount plates to get the job done.
Not Yet Reviewed
$42.99
Clearance
RJays offers a variety of chassis and suspension fabrication components, including below-the-frame radius rod/wishbone mounts. These radius chassis tab brackets mount 7-degree tie rod ends through the frame when using wishbones or hairpins.
( 1 )
$59.99
$35.50
On Sale
Artec Industries tube link mounts are designed to mount your control arms to lower links or any other tubing. They're perfect for making your own radius arms or other smaller size links. The durable brackets are constructed from 1/4 in. thick boxed steel for high strength, and their tapered design provides a smooth transition from the mounts to the tubing. These mounts are available in universal and application-specific models.
Not Yet Reviewed
$54.99
Summit Racing™ tubular transmission mounts are universal crossmembers designed to support and position any GM transmission where you need it. Available in straight and various dropped versions, with and without polyurethane mounts included, you can find one that will work for almost every vehicle imaginable. Drilling, welding, and fabrication will be required. Available in weld-on or slip-on models.
( 2 )
$69.99
Artec Industries upper truss link mounts are designed to mount on a flat surface. They're precision CNC-cut and bent from 1/4 in. thick mild steel. The bend strengthens each bracket so that no additional reinforcement is needed. Artec upper truss link mounts are available in different widths to accommodate the most common joints. Hole size comes standard at 9/16 in., but can be drilled out to up 1 in., if necessary.
( 1 )
$46.99
Lowdoller Motorsports accelerometer/weather sensor roll bar mounts are designed specifically for PI accelerometers and weather stations! These lightweight aluminum mounts serve to provide a secure, elevated location for these crucial sensors to gather data without being affected by the vehicle's extreme heat, vibration, and clutter under the hood. This specific positioning helps ensure the sensors can accurately record data for tuning, performance analysis, and safety, improving consistency and providing useful information for racing programs. These roll bar accessory mounts are available to fit different diameter roll bar sizes. Mounts are sold individually. Two button-head cap screws included for installation. PI accelerometers and weather stations are sold separately.
Not Yet Reviewed
$51.50
Competition Engineering offers several different types of brackets and tabs to help make it easier for you to mount and install accessories to your chassis. These brackets and tabs enable you to replace bent and damaged brackets, or update your chassis setup.
( 21 )
$23.99
—
$55.99
Allstar Performance rear T-bar breakaways are aluminum pieces available with a clear or black finish. They mount to the right rear T-bar found on most late models and modifieds, and measure 1/8 in. thick with an overall length of 20 in. wide. The breakaways can easily be cut down to 14 in. if needed. Choose your preferred finish.
Not Yet Reviewed
$42.99
Crown Automotive axle housing brackets provide a secure mount. Crown is known for carrying a large line of replacement parts that provides OE quality with the fit, form, and function of the originals. Their steel and rubber axle housing brackets are painted black and will supply a no-hassle fit, with the necessary support and value you expect and want.
Not Yet Reviewed
$38.99
Ensure a great installation with Allstar Performance weld-on coilover/trailing arm brackets. They are used to mount your coilovers and trailing arms by welding lower rear mount brackets to 3 in. diameter axle tubes. These brackets feature 1/4 in. thick steel with a 1/2 in. shock hole and come available with either 3/4 in. trailing arm holes or a 2 in. long slot.
Not Yet Reviewed
$34.99
Competition Engineering offers these Magnum series 4-link brackets to enable you to replace bent or damaged brackets when updating your rear-end housing. Designed for use on 3 in. diameter axle tubes, these brackets feature a radiused profile that simplifies welding and saves hours of fabrication time. The rugged steel construction eliminates bending in ultra high-horsepower cars, and the entire profile is stamped from hot rolled steel in one operation, to eliminate distortion and ensure exact dimensions.
Not Yet Reviewed
$54.99
RideTech makes a sweet 4-link system that comes with the brackets needed for attaching it to the stock rear axle. When not running the stock rear axle, you'll need RideTech axle brackets. These steel brackets provide multiple mounting holes for the best fit and will need to be welded onto the aftermarket axle. When it comes to building a muscle car or road warrior, it's commonplace to install a stronger rear axle. For a sure fit and a great ride, get RideTech axle brackets.
( 6 )
$35.00
Artec Industries universal link bushings are the perfect multi-functional product for your fabrication needs. Whether you are using these link bushings for suspension joints, motor mounts, or any number of other uses, the Artec Industries universal link bushings are built with strength in mind.
( 1 )
$26.49
Mount mirrors, switch panels and more to your roll bar with these universal roll bar clamps by Longacre Racing. Each clamp is made from light weight aluminum, and they're available in a choice of sizes to fit your roll bar.
( 2 )
$24.99
Allstar Performance GM metric chassis trailing arm bracket kits have what you need. Complete kits include the rear upper and lower control arm mounts. (The upper mounts must be cut to the desired height, depending upon where your housing is located in the chassis.) They're available in styles for different vehicle applications. Multi-hole lower mount brackets are available apart from the kit, if desired.
( 2 )
$49.99
Hooker transmission crossmember spacers are designed as part of a fully-engineered LS swap mounting system—and for compatibility with an aftermarket polyurethane transmission mount or stock replacement rubber mount of equivalent installed height. Machined from aluminum, these spacer only kits (bolts not included) will help facilitate installation of a GM 4L60-4L70 transmission into any LS-swapped 1968-72 A-body utilizing Hooker transmission crossmembers.
( 4 )
$45.36
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
