Availability
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 583 )
$265.99
—
$385.99
Ridetech subframe connectors add rigidity to your vintage vehicle's chassis and improve performance by reducing chassis flex. Modern tires and aftermarket suspension components are pushing the limits of OEM chassis designs. Ridetech's subframe connectors offer simple bolt-on reinforcement to significantly increase the performance of the chassis and dramatically transform the handling and ride quality. Connectors are fabricated from 1.5 in. x 3 in. x .125 wall steel for high strength, then bathed in a durable powdercoat finish for long-lasting, high-quality appearance. Order the pair recommended for your muscle car application.
( 11 )
$625.00
—
$695.00
The 1967-69 F-body was designed in an era when high performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-on subframe connectors offer a simple and effective solution to this common issue. They tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance—especially during cornering, acceleration, and braking. The tubular design connects the front Camaro/Firebird subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Additional details: * Included solid body mounts and hardware further reduce chassis flex. Their aluminum construction offers a noise-free alternative to polyurethane. * Thoughtful design: The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. * Easy bolt-in installation makes the upgrade hassle-free. * Fitment notes: Does not fit convertibles.
( 1 )
$509.95
—
$599.95
Say goodbye to frame twist and traction loss! If you're tearing up the track in your unibody vehicle, bolt on a pair of these Summit subframe connectors and strengthen that frame. These connectors have a tough black powdercoated finish for long service life under the harshest racing conditions. Hardware and instructions included.
( 111 )
$164.99
—
$172.99
These Auto Metal Direct front subframes are designed to replace your entire front-end subframe assembly. They feature factory-style welds for an OEM appearance and extra bracing to lower the crossmember, adding strength for jacking up the car. The subframes have all factory holes and brackets in the correct position for a bolt-in installation.
( 4 )
$1,299.99
Hotchkis Sport Suspension weld-on subframe connectors strengthen the chassis of your unibody to increase cornering and straight line performance. They're engineered to provide maximum ground clearance, while reducing annoying rattles and squeaks.
( 51 )
$499.99
—
$719.99
UMI Performance boxed weld-in subframe connectors are necessary chassis upgrades when racing and hard driving habits are present. UMI Performance boxed weld-in subframe connectors greatly improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter-panel flexing. Subframe connectors essentially tie the front and rear steel subframes together, resulting in a stiffened and strengthened chassis, allowing for better weight transfer and improved traction when launching. When strength is a concern, square tubing has greater torsion resistance over tubular designs. They will work with all aftermarket exhaust systems and will not affect ground clearance. Their weld-in style requires no bolts to tighten and offer less chance of flex when compared with bolt-in types.
( 23 )
$399.99
—
$449.99
Hooker Super Competition engine swap transmission mount kits are available for Chevy, Chrysler, and Ford small block and big block engines. These strong mounts are designed from steel and are engineered to provide you with an exact fit and a simple installation. Hooker Super Competition engine swap mount kits are the mounts of choice when matched with the appropriate engine swap.
( 10 )
$449.95
American Powertrain X-Factor crossmembers offer half the weight of traditional crossmembers—with all of the strength. Designed to fit with most muscle car platforms and the latest transmissions, X-Factor aluminum crossmembers are 1,000 hp strong and feature a powdercoat finish for added durability. They're available for a variety of vehicle and transmission applications.
( 34 )
$249.95
—
$299.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$399.95
$219.95
—
$449.95
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 16 )
$669.99
—
$1,566.96
BMR subframe connectors are some of the strongest in the industry. Their innovative design ties together key structural points across the floorpan, minimizing flex. BMR subframe connectors are fabricated from heavy-duty, rectangular tubing for frame rigidity and improved handling ability.
( 65 )
$199.95
—
$609.95
Install your tranny in the proper position using one of these Classic Performance transmission crossmembers. They're available for a variety of Ford and Chevy transmissions and are manufactured each vehicle's specifications for a precision fit. The durable steel crossmembers come with all necessary installation hardware. Keep your gear system secure and stable with Classic Performance transmission crossmembers.
( 166 )
$198.99
Hotchkis Sport Suspension Convertible X Brace supports will add rigidity to your vehicle's chassis by replacing the factory frame brace. As an added benefit, they also allow for the use of larger-tube exhaust systems, which will often require the removal of the factory brace anyway. These fabrication-designed braces feature extra reinforcing gussets and a laser-cut HSS logo. Get your fabrication on with an assist from Hotchkis Sport Suspension Convertible X Brace supports!
( 16 )
$299.99
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 159 )
$228.99
—
$466.99
Trans-Dapt Performance crossmembers eliminate the need to fabricate a rear crossmember. Their vehicle-specific transmission crossmembers are available as kits, with braces and mounting pads, or as the crossmember alone. Position your engine and transmission properly and exactly where you need them with quality, durable crossmembers from Trans-Dapt.
( 111 )
$255.99
—
$299.99
Alston Racing bolt-on subframe connectors are carefully formed to fit the contour of your vehicle's stock unit body floor. No cutting or welding is required for installation, allowing you to retain your stock exhaust, fuel, and brake lines. In about four hours, you can preserve the consistency and performance of your uni-body chassis. Additional features of Alston Racing bolt-on subframe connectors include: * Easy installation * Complete with Grade 8 hardware and instructions * Powdercoated to ensure long life and good looks * Can also be welded in
( 24 )
$297.00
—
$356.00
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 38 )
$269.99
UMI Performance tubular front steering braces, also known as the Wonder Bars, are designed to tie the front right and left subframes together. UMI Performance tubular front steering braces bolt directly under the front sway bar, stiffening the front frame and resulting in improved handling, cornering, and overall performance. The steering braces strengthen the chassis, taking stress from the steering box area, which is well known as a weak area on any third-generation F-body. The steering braces are constructed from 0.250 in. 1018 mild steel CNC-machined mounting points and 1.250 in. DOM steel tubing with a 0.120 in. wall that is fully MIG-welded for extreme strength and lasting performance.
( 38 )
$99.99
With modern high-grip tires, improved suspension, and big power, today's muscle car chassis need more help than ever. UMI Performance A-body frame rail braces improve chassis rigidity, reduce steering gear movement, and provide crisper handling. UMI pairs precision laser-cut brackets with strong tubing to reinforce the front frame sway bar mounting area. These direct bolt-in braces use existing hardware, require no cutting or welding, and are available in gloss black or UMI red. Features include: * 1.250 in. tubing * 3/16 in. laser-cut brackets * Race-proven * Requires no holes to be drilled. * Can be used with OEM sway bar bushings or aftermarket poly mounts * Installation time is approximately 20 minutes * Tested with factory sway bars and UMI sway bars * Check fitment for other aftermarket or custom sway bars
( 24 )
$159.99
Silver Sport transmission crossmembers are CAD-designed from heavy-duty formed and powdercoated steel. They offer strength and accuracy, two essentials of a crossmember. These SST vehicle-specific crossmembers are stiff and resistant to deflection, meeting or surpassing the original design, meaning they won't flex during hard launches or on rough roads. They are engineered to provide the proper driveline angle eliminating installation issues seen with adjustable crossmembers, as well as vibration issues and possible U-joint damage. Exhaust and ground clearance are also taken into consideration. Silver Sport transmission crossmembers locate the transmission at not only the proper height and angle, but makes sure it stays there, regardless of power, torque, or road conditions. Order the one for your specific vehicle.
( 3 )
$249.95
—
$299.95
QA1's tubular K-member for the 1982-1992 Chevrolet Camaro/Pontiac Firebird (F-body) is a significant front-end upgrade. Designed for reduced weight and increased clearance for headers and oil pans, QA1's K-members make a great upgrade for both street performance and track vehicles. QA1's engineers prioritized superior strength when designing these K-member components which reinforces the front-end unibody structure while optimizing weight savings. Unlike other K-members that lock you into a single setup, QA1 K-members offer unmatched versatility with their modular engine mounts (sold separately) that let you switch between engines and transmissions without needing a new K-member. No other K-member offers this level of adaptability, making QA1 the ultimate choice for a seamless build. The K-members offer the flexibility to be used with either coilover struts or QA1 spring sliders, depending on your performance goals. Coilover struts, like QA1's adjustable Proma Star Struts, can also provide a significant performance boost for your 3rd Gen Camaro or Firebird with the ability dial-in the perfect ride height. For those looking to achieve the perfect stance with greater negative camber, while accommodating wider wheels and tires, inboard spring sliders by QA1 are another great option. The inboard spring slider option also helps to maintain spring loads near the factory position on the QA1 K-member. Features and benefits: * Steel suspension subframe crossmember * High-strength design with powdercoat finish * The unique design of QA1's K-members allows the use of interchangeable engine mounts (sold separately) for easy engine swaps—choose from modular engine mounts (sold separately) that either allow you to reuse your existing small block engine and transmission combination or swap to a big block Chevy, or more modern LS and Gen V LT * Substantial weight savings—shedding 32 lbs. while increasing clearance and enhancing accessibility to the front of your car, this is an ideal upgrade! * Compatible with QA1' spring sliders or QA1's coilover struts (sold separately) * You can make your driveline swap even easier by using QA1's transmission crossmembers and torque arms (both sold separately) * Bolt-in installation—QA1's commitment to thoughtful product design is evident in their fully bolt-in kits, providing an easy installation process Fitment Notes: Must use QA1 lower control arms (sold separately). Not compatible with factory coil springs. Must use QA1 coilover struts or QA1 spring slider kit (both sold separately). Engine mounts sold separately.
Not Yet Reviewed
$699.95
UMI Performance shock tower braces make a great beginning for modifying your favorite ride. These braces positively connect your front right and left shock towers together for firmer handling and improved steering response. Constructed in the USA, UMI shock tower braces are available in DOM mild steel tubing with CNC-machined mounting plates. Or, if you're worried about adding front end weight, choose UMI's just as strong but lighter weight 4130 chromoly steel tubing braces. Both choices are given a brilliant and durable powdercoat finish in several colors. Beef up your chassis and get ready to hit the winding roads with UMI Performance shock tower braces.
( 50 )
$159.99
—
$199.99
Reduce overall chassis flex on your musclecar with the addition of Heidts subframe connectors. They will improve your chassis's integrity and provide a solid foundation for the rest of your performance enhancements. Don't let your musclecar get out of shape. Keep it solid and fit for the winding road ahead with Heidts subframe connectors.
( 7 )
$322.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
