Availability
Showing In Stock Items. Show All 27 Items.
On Sale
Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits feature patent-pending trusses that go to a whole new level of strength, weight savings, simplicity of installation, precision fitment, and complete axle protection. Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits are advanced truss and bracket systems which can be used for AAM 14-bolt 10.5 in. ring gear. The kits provide the factory link, track bar, spring, anti-sway bar, bump stop pads, and shock locations all encompassed in an axle tube reinforcing truss system. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * Lightweight yet strong ... only 42 lbs. total * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * 2-piece truss design means smaller packaging with easy installation * Using a 1 ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Save hours of installation time with the built-in axle tube truss which is quicker to weld than individual brackets * Track bar mount includes four locations for those who have aftermarket lifts. Stock height hole is not included though * Coil spring locator is machined from solid steel making welding to bracket quicker than previous tube and cap-style locators * Shock brackets have been moved up for a slightly higher clearance lower control arm bracket * Easily upgradeable for future link geometry changes. Just trim off factory location upper control mounts and weld on a center link mount
Not Yet Reviewed
$604.99
$544.49
On Sale
Artec Industries tube flanges are precision CNC laser-cut from 1/4 in. thick steel for high-strength. They're available for a variety of tube diameters to suit your project needs. Their inner hole is slightly oversized for easy install and maximum weld penetration, and they feature 3/8 in. bolt holes.
Not Yet Reviewed
$11.99
$10.79
On Sale
Stifflers Suspension transmission crossmember extension brackets are designed to work with Stifflers' unique single tube crossmembers. These adjustable bolt-on mounting bracket kits allow the optimum placement of their crossmembers with no modifications required. They are part of the range of Stifflers crossmembers that feature the strength, adjustability, and good looks that make them industry leader.
Not Yet Reviewed
$59.95
$53.96
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$359.95
—
$399.95
$208.95
—
$342.85
On Sale
Lowering your truck is cool, but when you do, where are you going to put the exhaust--under the frame? You'll run out of room, real quick. Well, Brothers Trucks has the solution in their crossmember exhaust brackets. These kits include meaty steel components--brackets, bolts, and template—that allow modification of the factory trailing arm crossmember for dual exhaust. They are ideal options if you don't want to remove the crossmember and still be able to tuck the exhaust up inside the frame, and they are the perfect solution for someone that doesn't have access to a welding machine. The provided metal template allows perfect alignment for the bolt holes and exhaust cut out. It utilizes an existing hole in the crossmember to locate the template, then insert one of the supplied bolts, clamp in place, and mark the remaining holes for drilling. For the center hole, the hole in the template is larger to allow a plasma torch to be used as a guide, but if you don't have a plasma torch other means, such as a hole saw, can still be used to cut the hole. Get more clearance for exhaust without weakening your truck's frame when utilizing Brothers Trucks crossmember brackets. Features: * Exhaust tailpipes fit through the holes in the frame for easier installation and more ground clearance when adding dual exhaust * Fits rear wheel drive trucks with trailing arm and coil spring rear suspension * Steel construction * Allows up to 3 in. dual exhaust system * Includes two pre-welded cut-out pieces, drilling template, and Grade 8 fasteners
Not Yet Reviewed
$154.95
$139.45
On Sale
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$76.99
—
$126.49
$65.05
—
$113.84
On Sale
Scott Drake Monte Carlo bars present high performance developed by Carroll Shelby. Designed to stop shock tower flex and maintain proper wheel alignment during hard cornering, the extra support of these braces will also help prevent shock tower stress cracks. Monte Carlo bars are copied from the original design and feature thicker diameter tube, plus improved fender brackets. Scott Drake has stamped square holes in the top of each fender bracket to allow for the use of lower-profile carriage bolts. You may choose options of curved or straight in steel construction—and a choice of finishes, or stainless steel. They also offer curved race versions that feature .975 in. diameter tubing and are equipped with Heim joints for smoother operation. Order the shock and strut brace designed for your specific vehicle application.
( 52 )
$110.95
—
$141.95
$99.85
—
$127.75
On Sale
Mount your lower link arm to the frame using these strong replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for durability and include grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower link frame brackets to be mounted at an angle without excess material hanging off the side. Not only do these brackets look better and more natural to the frame, but they also ensure less bracket sliding on the rocks and getting in the way.
( 4 )
$49.99
$44.99
On Sale
Make secure automotive mounts using these convenient Artec Industries general purpose tabs. They're precision-cut from 1/4 in. thick steel and feature a bolt hole for secure attachment and a variety of uses. The welding tabs are available in different heights, shapes, and hole sizes to accommodate your specific project.
Not Yet Reviewed
$13.74
—
$19.24
$12.37
—
$17.32
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$237.95
—
$449.95
$164.95
—
$403.95
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$377.95
—
$473.95
$207.95
—
$260.95
On Sale
Improve the handling of your vehicle by installing a Drake strut tower brace. Designed to reduce strut tower flex by adding extra stiffness that will transmit weight between the two strut assemblies, helping to keep your tires firmly on the ground for increased traction during hard cornering. They offer a simple bolt-on installation.
( 27 )
$427.95
$384.95
On Sale
Artec Industries' modular truss ends are designed to complement their modular and short trusses—enabling them to "grow up" and be full-width trusses. Simply trim the end of this product to match the contours of ANY short-style truss, and you have a full-width truss at hand. The design is borrowed from Artec's new low-profile front trusses, and gives you a more compact truss that doesn't get in the way of other vehicle components. The 3/8 in. thick truss top and 1/4 in thick gussets incorporate a unique design to strengthen the axle and provide a link mounting surface or bump stop pad. Use a long modular truss end with a 14-bolt truss and make a 14-bolt front axle. Or use two modular truss ends on a rear axle with a modular or short truss, and you'll have a low-profile rear truss which has more clearance for frame rails than a normal rear truss and gives you a flat surface for bump stops to hit. Additional product details: * 3/8 in. thick mild steel truss top and 1/4 in. mild steel gussets. Precision CNC-cut and bent for great fitment * Works great with Artec modular and short trusses AND virtually any short-style truss, even from other manufacturers * 3.5 in. axle tube diameter * Allows customization of your truss system to fit your needs * Provides a lower profile than a standard rear truss—perfect for clearing rear frame rails and providing a bump stop pad * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Overall low-profile design means your axle is stronger, sleeker, easier to fit into any vehicle, and less likely to interfere with vehicle components NOTE: The truss end is flat on the end and not contoured to any truss. This requires trimming to fit. This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Some grinding and fitment may be required when installing this item. Every axle varies slightly and some fabrication may be required.
Not Yet Reviewed
$179.99
$161.99
On Sale
Stifflers Suspension strut tower braces add strength and stiffness to the front end by integrating the strut towers and firewall, greatly reducing flex and alignment changes caused by front suspension loads during cornering and braking. Reducing this flex provides increased steering response and stability, giving you improved overall handling and control. Features include: * Engineered to be used with most 3- or 4-bolt caster/camber plates * Clears most aftermarket cold-air and supercharger inlets * Manufactured of DOM tubing to maximize stiffness and strength while reducing weight * Triangulated mounting is far stiffer than standard 2-point braces * Design optimized using CAD/CAE software combined with real-world test data * TIG-welded for superior strength * Industrial-grade powdercoated for long life
( 1 )
$199.95
$179.96
On Sale
Mount up your links using a set of Artec Industries adjustable dual 4-link brackets. They're made from 1/4 in. thick steel plate and come unwelded. These chassis brackets feature a height-adjustable top plate, 25 degree angle on the upper holes, 10 degree angled out lower holes, adjustable-width lower holes, and a skid plate to protect the joint location. Artec adjustable dual 4-link brackets use an L-shaped inner tap for higher strength, and are cut out for pass-through plumbing and electrical connections.
Not Yet Reviewed
$249.99
$224.99
On Sale
Artec Industries upper truss link mounts are designed to mount on a flat surface. They're precision CNC-cut and bent from 1/4 in. thick mild steel. The bend strengthens each bracket so that no additional reinforcement is needed. Artec upper truss link mounts are available in different widths to accommodate the most common joints. Hole size comes standard at 9/16 in., but can be drilled out to up 1 in., if necessary.
( 1 )
$46.99
$42.29
On Sale
Artec Industries dual 3-link brackets offer flexibility and adjustability in one place. They consist of a frame gusset and an upper control arm mount that can be used on either driver or passenger side; simply flip the versatile brackets around. No other combo 3-link brackets give you the option to choose which side your upper control arm is on. These Artec brackets come unwelded—however, the pre-jigged keys and slots make assembly and fixturing simple. The units are made from 1/4 in. thick boxed steel, with a skid plate bottom wrapping around them to protect the joint area from direct impact.
Not Yet Reviewed
$239.99
$215.99
On Sale
Artec Industries adjustable link tower brackets are designed for use with large joints that have a 2.625 in. mounting width. The holes are set at 7, 8, and 9 in. from the axle centerline to allow you to fine-tune your suspension. They're manufactured from 1/4 in. thick steel and come in four unwelded pieces that jig together for easy assembly. These Artec brackets are especially useful if your tire size changes and the suspension needs to be adjusted. Rather than cutting off the old brackets and installing a taller one, you can simply move your link to the next higher mounting hole!
Not Yet Reviewed
$89.99
$80.99
On Sale
Artec Industries large 4-link crossmember brackets allow for triangulated lower links that meet at a 1.75 in. O.D. round tube or 2.00 in. square tube crossmember between frame rails (depending on model). They're made for use with large joints that have a 2.625 in. mounting width. The hole size is 9/16 in., but can be drilled for larger sizes. Angles are set at 22 degrees each (44 degrees total) to allow use with Artec's angled lower link axle brackets. These large 4-link crossmember brackets are made from 1/4 in. thick steel and come in six unwelded pieces that jig together for easy assembly.
( 1 )
$114.99
$103.49
On Sale
Artec Industries offer JK rear frame UCA 3-link chassis brackets that will allow for mounting a single upper control arm above the driveshaft in a Jeep JKU. These brackets are for use with RockKrawler Krawler joints that have a 2.325 in. mounting width and a hole size of 9/16 in. They are machined from 3/16 in. thick steel and are CNC-bent for precision. These brackets do require welding, and if so desired, may be painted. Each rear frame bracket welds between the two factory crossmembers above the driveshaft and is intended for use with a RockKrawler X-Factor rear 3-link upper control arm.
Not Yet Reviewed
$87.99
$79.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
