Availability
Showing In Stock Items. Show All 26 Items.
On Sale
American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits will replace both the upper and lower ball joints on your ride. This second-generation system features a lower cup machined with a recessed flat for increased clearance with axle shafts and RCV setups. The double-ended upper stud accounts for variances between the knuckle and inner C castings, and you can dial-in steering firmness by adjusting torque values on the top Nylock upper and lower assemblies. Enjoy better clearance, an easier installation, and decreased parasitic drag with American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits! More product features and specifications include: * Using two double-ended studs, the hardware is installed in the knuckle with the lower Nylocks fully seated into the tapers and slid onto the inner C casting from below * Adjustable float to accommodate bent C castings and other abnormalities
( 1 )
$639.99
$543.99
On Sale
American Iron Off-Road ball joint delete Dodge AAM kits change the dynamics of the factory configuration, where the uppers and lowers don't rotate on the same axis. In the factory configuration, the lower joint misaligns as it rotates and the upper joint telescopes because it's not really a ball joint, but a greased shank inside a steel sleeve. This system will help stop the endless ball joint replacement cycle and improve the quirky factory steering characteristics. Get rid of the old press-in ball joint headache with the American Iron Off-Road ball joint delete system best suited for your build. More product features and specifications include: * Custom machined press-fit upper and lower cups * Custom 4140 heat-treated hardware with Grade 8 Nylock nuts * PTFE-lined 7/8 in. bearings for smooth operation * 3D-printed plastic dust cap and Viton® seal head to keep debris from tops of each assembly * Open bottom to allow any moisture to evacuate from joint * Customized oversized cups (0.008 in. over) available for axles with enlarged inner C-mount holes from numerous replacements
( 2 )
$714.99
$607.74
On Sale
RSO Suspension sway bar kits provides balanced performance of front and rear suspension for rugged off-road conditions. The sway bar kits are a direct replacement for the stock sway bar ensuring quality fit and finish and comes with all components required for installation. They are constructed of SAE 4130 heat-treated steel and powdercoated alloy steel arms for maximum strength, which is the same quality features found in professional off-road competition sway bars. This includes the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, Delron bushings, semi-gloss black powdercoated arms, and adjustable length heim jointed sway bar links. Order the kit designed for your make/model. Product features and details: * Vehicle-specific fitment to ensure that the part is right for your vehicle and all components needed for installation—modifications may be required * Constructed of SAE 4130 heat-treated steel for maximum strength * Rear sway bar kit includes heavy-duty stainless steel braided brake lines for added suspension travel * Features steel arms and includes all components for installation: sway bar, powdercoated bolt-on steel frame brackets, performance bushings, powdercoated arms, adjustable sway bar links * Provides increased traction and no need to disconnect for off-road use * Powdercoated bolt-on frame brackets and arms, zinc plated adjustable end links and high-quality Delron bushings for longevity in the harshest terrain * Backed by a limited lifetime manufacturer warranty on the workmanship/structure, 5-years on the components, and 1-year on the finish/coating
( 2 )
$624.99
$549.99
On Sale
Belltech dropped front spindles are designed to improve handling and retain exceptional ride quality. These spindles maintain suspension geometry, eliminating the excessive ball joint, shock, and tire wear that is common with other forms of lowering.
( 201 )
$585.00
—
$595.00
$526.50
—
$535.50
On Sale
Belltech anti-sway bars are designed to improve handling and steering response by minimizing body roll, while not affecting ride quality. Their anti-sway bars are manufactured from cold formed solid steel and use swedged ends for their superior strength and reliability. They are finished with a high-quality powdercoat and include polyurethane bushings and high-grade hardware.
( 211 )
$558.00
—
$640.00
$502.20
—
$576.00
On Sale
With Crown Automotive steering boxes and steering gear assemblies, you can feel the difference on and off the road. Faulty steering boxes can result in excessive play in your steering wheel. When this occurs, you have a harder time controlling the vehicle. So, whether you're rebuilding, or your car, truck, or Jeep is wandering all over the road, it may be time to replace the steering gear assembly. Available for both power and manual systems, Crown Automotive steering boxes and steering gear assemblies are offered to fit models spanning more than a half-century.
( 6 )
$565.99
—
$658.99
$509.39
—
$593.09
On Sale
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$595.00
—
$615.00
$535.50
—
$553.50
On Sale
Steer Smarts presents extreme steering linkage--Yeti XD Series linkage for Jeeps. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for Jeeps. Yeti XD Pro-Series tie rod assemblies are direct bolt-ons and can be installed in just minutes--no need to modify or alter your Jeep. Features: * Ball joints: -- 30mm 2 1/2 Ton ball joints designed specifically for the specific Jeep -- Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Tie rod ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long-term serviceability -- Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength -- Large 1 1/4 in. rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Adjuster sleeve: -- Engineered for proper clearance with chassis components to eliminate interference -- Tie rod adjuster is manufactured from large 1 3/4 in. diameter solid high-strength 7075 aluminum for maximum strength -- Pro-Series adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Hard coated for long term serviceability and durability
Not Yet Reviewed
$599.00
$509.15
On Sale
Aldan American Track Comp double adjustable coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.
( 4 )
$856.95
$771.26
On Sale
Eibach Pro-Truck systems are the perfect choice for enthusiasts who want the ultimate in a performance lowered truck or SUV. The front springs are engineered to provide enhanced handling, a lower center of gravity, and a simply great look—all without the retaining straps used by some competitors. Rear kits contain everything you need to lower your truck's ride height and achieve ultimate visual and dynamic balance. The front and rear elements are carefully balanced to work together, delivering a crisp, modern look, and the smooth ride and responsive handling that Eibach is known for. Order the kit designed for your vehicle application. Additional features include: * Ultimate on-road handling * Low, lean look * Complements large-diameter wheels and tires * Flatter cornering * Increased rollover resistance * Enhanced stability and response * Excellent ride quality
( 10 )
$831.00
$664.80
On Sale
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$845.70
—
$851.70
$761.13
—
$766.53
On Sale
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$840.00
$756.00
On Sale
Aldan American Road Comp coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.
( 42 )
$856.95
$771.26
On Sale
Belltech has developed the solution to correct many of the problems in the front end of vehicles with their Belltech leveling kits. These corrections include fixing the lackluster handling and performance of the factory McPherson Struts by utilizing the next generation valving technology of the Street Performance shock line. In true Belltech style, the Street Performance leveling struts not only provides the performance and safety that you can only get from Belltech, but also will allow you to adjust the ride height of the front end by up to 2 in. of lift to level out the factory front to rear rake.
Not Yet Reviewed
$558.00
$502.20
On Sale
Belltech Pro Coil lowering spring kits provide two lowering height options to gain the perfect stance. You figured out what lowering you want to match your wheel and tire combination, but afterwards you decided you would like to go an inch lower. No problem. Belltech's Pro Coil kits includes their high-quality coil springs and engineered vehicle specific upper spring or strut mount spacers, allowing you to change your mind and your vehicle's stance.
( 67 )
$595.00
$535.50
On Sale
aFe Control Series sway bar kits are designed for automotive enthusiasts looking for superior cornering. These perfectly balanced, lightweight CNC-machined tubular sway bars will improve your handling and inspire driving confidence. They provide TIG-welded bar ends for a precise fit and added strength, along with polyurethane bushings and mounting hardware for a complete install.
( 3 )
$635.00
$571.50
On Sale
Fully assembled and bench-tested ARB on-board high performance air compressors install into your vehicle and include a full, snap-together, fuse-protected wiring loom with solenoid plug-in contacts, mounting hardware with reinforcing bracket, and an OEM-quality compressor isolating switch. With the addition of an ARB-171302 pump-up kit (sold separately), they can be used to activate ARB Air Lockers, and perform other functions such as inflating camping gear. So what makes these compressors special? They're small enough to fit into even the tightest space and quiet enough to mount in the cab. They have enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes. And, they work. ARB has tested these units in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and they continue to perform. Features of ARB on-board high performance air compressors include: * Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply * Fully sealed components for moisture and dust protection * Over-pressure safety valve-equipped * Pressure switch-controlled air manifold system specially designed for ARB Air Lockers * Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life * Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing * Motor is internally thermal-protected against extreme temperature damage * Comprehensive-photo illustrated installation guide * Range of accessories available
( 9 )
$766.60
—
$813.55
$689.94
—
$732.20
On Sale
Old Man Emu BP-51 Bypass shocks feature revolutionary, patent pending technology engineered to deliver unparalleled on and off-road performance for your 4x4. Developed and extensively tested under the harshest conditions in Australia, these big bore, position-sensitive bypass shock absorbers with remote reservoir bolt onto your vehicle without any vehicle modifications. They combine considerable ride comfort around town, with significant amounts of end-zone damping for exceptional chassis control and handling off-road. Order the model designed for your vehicle application. Key features of Old Man Emu BP51 Bypass shocks include: * 6061 grade aluminum remote oil canister (for increased oil volume, resulting in lower oil temperatures) * Durable Dash 6 high-temp PTFE hose (incorporates high-flow fittings for optimum oil flow) * Large PTFE-lined spherical bearings * Spring seat (6061 grade aluminum) * High-quality X5K grade steel coil (incorporates application-specific design for use on various coilover models) * Adjustor (for adjustment of spring preload and ride height) * Top hat (6061 grade aluminum) * Rubber bushings (oversized) * Shaft guard (replaceable, impact resistant, high-density polyethylene) to prevent damage to shock absorber shaft * Pinion shaft (hard chromed, for strength and durability) * Adjuster (allows fine-tuning for ride comfort and control to suit varying vehicle and trip requirements) * Shock absorber body (6061 grade aluminum with hardened finish for increased heat dissipation and corrosion resistance) * Piggy back clamp (allows easy connection of remote oil reservoir to main shock absorber body)
Not Yet Reviewed
$599.95
$539.96
On Sale
Eibach Sport-Plus performance handling packages have the same amazing performance as Eibach's legendary Pro-Kit package, at a more aggressive level. They feature Sportline springs and an anti-roll kit that allows your vehicle to sit at a lower stance, helping to deliver the precise turn-in response, improved handling, and intense cornering grip that every enthusiast wants. If you take your car's handling seriously, then these Eibach Sport-Plus performance handling packages are exactly what you need.
( 2 )
$895.00
$716.00
On Sale
Eibach Pro-Plus performance handling packages bring you true high-end performance with their legendary Pro-Kit springs and matching anti-roll kit sway bars. These kits will lower your car's center of gravity, reducing squat during acceleration, body roll through corners, and excessive nose-dive while braking. They will allow you to stop quicker, corner faster, and even increase your mpg! If you're a serious enthusiast for superior handling, then you need to step up to the performance of these Eibach Pro-Plus performance handling packages.
( 1 )
$895.00
$716.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
