Availability
Showing In Stock Items. Show All 40 Items.
On Sale
Summit Racing™ double-adjustable ladder bar kits are built for strength, consistency, and ease of adjustment. Fabricated from 1 in. diameter DOM tubing, these 32 in. bars come complete with all hardware--including 3/4 in. heims--and use a large 3/4 in. front bolt. The double-adjustable link allows you to make quick pinion angle and preload adjustments without removing the bars from the car. Easy to install and simple to adjust, nothing hits the tires like a Summit Racing™ double-adjustable ladder bar suspension. Installation by a certified welder is recommended. Additional product details: * Durable black powdercoat finish * Rod end safety loops included * 3/4 in. rod ends, adjusters, jam nuts, and Grade 8 hardware * 3/16 in. weld-on housing brackets * Set up for 32 in. from center of housing to center of rod end
( 2 )
$329.99
$296.99
On Sale
With Summit Racing™ tubular rear trailing arms you get heavy-duty tubular steel construction, which is lighter weight but adds stability and strength, a durable black powdercoat finish, and long-lasting polyurethane bushings. Our tubular rear trailing arms offer a great alternative to rusty old stamped factory arms.
Not Yet Reviewed
$519.99
$479.99
On Sale
REKUDO front upper control arms are one part of a fully engineered suspension system for the 1970-81 Chevrolet Camaro and Pontiac Firebird. The systems are modern auto-cross inspired suspensions that retain the OE appearance and strength with stamped steel control arms. REKUDO front upper control arms feature an EDP coating, heavy-duty ball joints, offset washer inserts for easy caster adjustment, and factory-style rubber bushings. Gain better performance and an improved camber curve with REKUDO front control arm systems. Features: * Lowered center of gravity with improved handling * Easy caster adjustment with offset oval shaped washers that fit into the upper control arm pivot shafts—proper caster setup improves stability and driver confidence on corner entry * Heavy-duty ball joints and rubber bushings are pre-installed * Black EDP (Electro-Deposit Primer) coating for corrosion protection * Easy bolt-on installation utilizing the factory mounts Please note: * Must be used with tall spindles RK600-02 and 1968-82 C3 Corvette brakes. Ideal for use with all other REKUDO Suspension System components for the 2nd Gen F-body * Optional Delrin® bushings available separately (RK100-20) * C3 Corvette-style brakes require 15 in. minimum diameter wheels
Not Yet Reviewed
$641.95
$417.95
On Sale
Tuff Country EZ-Ride leaf springs are tapered, snub-rolled, and preset for the most comfortable ride available in lifted, positive-arch leaf springs. PTFE inserts are also used to help with ride characteristics as well as to reduce squeaking. Heavy-duty applications are also available to help accommodate a winch or for heavy towing applications. Tuff Country is the originator of the 3 and 4-leaf EZ-Ride leaf springs. Tuff Country's research has proven that using thicker steel per leaf and fewer leafs results in a much smoother ride than using the standard thinner steel and more leafs.
( 13 )
$306.99
—
$552.99
$276.29
—
$497.69
On Sale
Artec Industries Easy 4-Link bracket sets provide one of the simplest ways to get your links done. The kits are based off popular parts for a single-or dual-triangulated 4-link suspension with angled upper control arms and straight or very slightly angled lowers, depending on your application. A-kit brackets allow for separate upper and lower mounts on the frame side for customizable 4-link setups. The B-kit brackets are combined for easy setup and upper mounts allow for adjustability. The C-kit brackets allow for lowers that can attach to a crossmember under the transfer case and uppers that attach on inside of frame rails. Order the Artec Easy 4-Link bracket kit that best fits your suspension application.
Not Yet Reviewed
$428.99
$386.09
On Sale
You definitely know when your power steering pump fails--turning the wheel becomes a muscle-building chore. Racing Automotive Group power steering pumps offer a solution. Designed for use with fast ratio steering boxes and steering quickeners, they feature a 1,300 psi operating pressure and a lightweight aluminum construction. Racing Automotive Group power steering pumps are available individually (pump only), with a pulley (V-belt or serpentine), or with pulley and durable plastic reservoir.
( 5 )
$309.99
$278.99
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$470.95
—
$473.95
$259.95
—
$260.95
On Sale
Tuff Country leveling kits are designed to make the front of your truck even with the rear, allowing for slightly larger tires and eliminating the "nose-down" look common in most trucks. All leveling kits are made of high-quality materials, engineered to maintain a factory or near factory ride on all vehicles. Give your truck an improved stance with Tuff Country leveling kits.
( 42 )
$282.99
—
$490.99
$254.69
—
$441.89
On Sale
Tuff Country lift kits are designed to add additional height to your truck or SUV to increase fender clearance and allow for larger tires. Available in a wide variety of lift sizes and types, Tuff Country lift kits are trademarked with quality engineering and materials, affordable pricing, and simple installation finished with a great ride. Whether you are looking to lift a little or a lot, Tuff Country will give your vehicle the height and stance you've been wanting.
( 2 )
$280.99
—
$528.99
$252.89
—
$476.09
On Sale
Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts
( 73 )
$278.99
—
$551.99
$251.09
—
$496.79
On Sale
Whether you're just starting out with crossover steering or going full hydro, these Artec Industries Ultimate 60 high steer arms are meant to handle it all—and provide you options as well! Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop commonly found in axles after moderate off-road abuse. The hardware for a springless conversion is included, and consists of a 3/4 in. set screw, jam nut, grease zerk, 1/4 in. thick load washer, and upper kingpin bushing for each arm. The Artec Industries Ultimate 60 high steer arms are machined blank to allow custom tie rod and draglink locations. The knuckle bolt hole is not machined into the high steer arm because the factory hole location in every knuckle is different; thus, to fit your knuckle perfectly, the holes need to be drilled according to the knuckles they will attach to. Artec high steer arms are CNC-machined from 1 1/4 in. thick 1018 cold roll steel and then zinc plated for corrosion protection.
Not Yet Reviewed
$472.99
$425.69
On Sale
REKUDO front lower control arms are one part of a fully engineered suspension system for the 1970-81 Chevrolet Camaro and Pontiac Firebird. The systems are modern auto-cross inspired suspensions that retain the OE appearance and strength with stamped steel control arms. REKUDO front lower control arms feature an EDP coating, heavy-duty ball joints, offset washer inserts for easy caster adjustment, and factory-style rubber bushings. Gain better performance and an improved camber curve with REKUDO front control arm systems. Features: * Lowered center of gravity with improved handling * Easy caster adjustment with offset oval shaped washers that fit into the upper control arm pivot shafts—proper caster setup improves stability and driver confidence on corner entry * Heavy-duty ball joints and rubber bushings are pre-installed * Black EDP (Electro-Deposit Primer) coating for corrosion protection * Easy bolt-on installation utilizing the factory mounts Please note: * Must be used with tall spindles RK600-02 and 1968-82 C3 Corvette brakes. Ideal for use with all other REKUDO Suspension System components for the 2nd Gen F-body * Optional Delrin® bushings available separately (RK100-20) * C3 Corvette-style brakes require 15 in. minimum diameter wheels
Not Yet Reviewed
$605.95
$333.95
On Sale
Artec Industries' new JK heavy-duty crossmembers are designed to give your Jeep Wrangler JK better protection beneath the vehicle than the stock unit. Designed using CAD files directly from the manufacturer, these heavy-duty reinforcements ensure that you have a great fit with factory components. Made from CNC-cut and formed 1/4 in. thick steel, the JK heavy-duty crossmembers will hold up to plenty of off-road abuse. They enable you to mount longer arms for greater stability and flex. All nuts are pressed into the brackets for easy removal and installation; the crossmembers use 2.625 in. wide joints or bushings with 9/16 in. holes; they're shipped bare so you can custom finish it however you want. Order the model recommended for your Jeep application.
Not Yet Reviewed
$516.99
—
$571.99
$465.29
—
$514.79
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$418.95
$272.95
On Sale
REKUDO spindles are part of an autocross-inspired, fully engineered, modern suspension and brake system. The system retains the original equipment (OE) appearance and strength with taller than stock spindles for improved camber gain and the spindles provide a 1 in. drop for a lower center of gravity and improved handling. These spindles are forged 4140 chromoly steel construction with a black EDP coating for strength, durability, and corrosion protection, and they must be used with specific REKUDO components.
Not Yet Reviewed
$593.95
$326.95
On Sale
Tuff Country offers all of the components that you need to create a high-quality suspension lift kit. All Tuff Country components are manufactured from top-grade materials to high-quality standards.
( 5 )
$389.99
—
$450.99
$350.99
—
$405.89
On Sale
Artec Industries JK/JL/JT 1-ton APEX front Super Duty swap kits are stronger in design, lighter in weight, and easier to install. The patent-pending APEX trusses take these features to a whole new level along with precision fitment, and complete axle protection. Available with three different styles of upper control arm brackets, the kits contain upper and lower control arm mounts, shock mounts, anti-sway bar mounts, track bar mount, bump stop pads, and coil spring mounts. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs mean less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * OEM location upper control arms mount to an ultra-high clearance differential bridge that hugs the shape of the casting (bushing or Johnny Joint option) * Truss extends under coil buckets all the way to inner C for end-to-end rigidity * Multi-piece truss design means smaller packaging with easy installation * Using a 1-ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Heavy-duty track bar bracket can slide to multiple positions for steering geometry fine tuning * Shock brackets have been moved up and out (compared to JK OEM position) for a slightly higher clearance lower control arm bracket
Not Yet Reviewed
$593.99
$534.59
On Sale
Artec Industries JL/JT to TJ APEX M210 front swap kits upgrade your Jeep with heavy-duty coil buckets. Engineered to precisely fit JL/JT M210 axles, each kit boasts 3-D fitment, ensuring every angle aligns perfectly for optimal ride quality, top-tier performance and reliability. Whether you're navigating rocky trails or cruising highways, these coil buckets deliver the stability and performance upgrade your build demands. Ditch the guesswork and outfit your TJ with a tailored, professional-grade solution from Artec Industries. Features and benefits: * Crafted from premium steel for robust strength and lasting durability, ensuring reliable performance even in the most challenging off-road environments * Designed to weld seamlessly onto Jeep JL or JT front M210 axles, delivering an exact fit that guarantees proper suspension alignment and stability * Developed using advanced 3-D data from Dana Corp/SPICER and OEM vehicle specifications, ensuring precise fitment and optimal clearance for your build
Not Yet Reviewed
$299.00
$269.10
On Sale
Do you have rusty, busted, or abused factory front coil buckets on your TJ or LJ? Or are you looking to change to a coil suspension on your YJ or other leaf sprung vehicle? Or do you want to customize your suspension? These heavy-duty TJ front frame side coil buckets from Artec Industries are a great replacement for your OEM coil buckets. They will also allow you build your suspension the way you want, not limiting you to how the factory intended. This DIY kit includes the laser-cut and precision CNC-bent pieces that will need to be welded together as well as onto the frame. The kit has been specifically designed to complement the factory frame, yet look distinctly hardcore. It's also engineered for maximum strength and easy assembly—with jigs and laser-etched part numbers so you can't put it together wrong. Product features: * CNC laser-cut and CNC-bent from heavy-duty 3/16 in. thick steel * CAD-designed with models directly from Chrysler to fit perfectly * Retains factory bump stop threading, so they're a direct replacement * Gusseted between the coil bucket and shock mount for extra strength * Includes a 2.0 in. O.D. piece of DOM tubing * Provides factory-style shock stem attachment, or choose to add shocks tabs for a clevis bushing-style shock attachment * Direct replacement for TJs and LJs—and can work as an upgrade for leaf sprung vehicles looking to change to coil spring suspension *NOTE: If not installing on a TJ or LJ, consideration must be made for the OEM frame width in comparison to axle width. Most leaf sprung frames do not turn inwards in this area like a TJ does, so the frame is wider. **NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Welding, grinding and fitment may be required when installing this kit. Every frame varies slightly and some fabrication may be required.
Not Yet Reviewed
$351.99
$316.79
On Sale
Artec Industries TJ/YJ back half frame kits allow many Jeep owners to eliminate the clunky back half of their stock frame and allow clearance for coilovers and/or larger heavy-duty axles. By narrowing the frame, you're able to run coilovers without notching and weakening your factory frame. Plus, since the shocks don't hang as low as the factory frame in the back, you can do a stretch with that one-ton axle and have better up-travel. Artec Industries TJ/YJ back half frame kits feature: * CNC laser-cut and bent from 1/4 in. thick steel * CAD-designed with models directly from Chrysler to fit perfectly * Interlocking jig and key holes for quick, one-way-only assembly * Maximum welding surface area with weld holes and fish mouth ends * Stylish curved design complements factory-style and increases strength at transitions * Wide enough to fit Artec fuel cell mounts for JAZ and RCI fuel cells
( 4 )
$406.99
$366.29
On Sale
Artec Industries Ford Super Duty high steer arms are designed for use with the aftermarket Reid Racing Super Duty knuckles. They enable you to correct OEM steering geometry, allowing the drag link to mount above or beneath the arm, depending on lift height steering problems. These arms are CNC-machined from 1 in. thick cold roll steel and clear zinc plated for corrosion resistance. Order the model recommended for your application.
Not Yet Reviewed
$296.99
$267.29
On Sale
Bolt on a set of Tuff Country ladder bars to help reduce axle hop and wrap. They provide increased traction and acceleration by maintaining tire contact with the road. These rugged steel accessories are available in sizes to fit a wide variety of makes and models spanning more than a half-century.
( 7 )
$443.99
—
$483.99
$399.59
—
$435.59
On Sale
Tuff Country torsion bar keys are used as a simple way to level out the front-end of your truck with the rear without "cranking up" the factory torsion bars. These torsion bar keys by Tuff Country have superior-forged construction and provide a custom fit to allow you to gain more tire clearance and still experience the same comfortable ride from your truck.
( 2 )
$370.99
$333.89
On Sale
Tuff Country offers EZ-Install lift kits for a wide range of vehicles. Simple and affordable, the suspension lift kits can raise the front or rear (or both ends) of your vehicle by 2 in. for the aggressive stance you want—and increase fender clearance to facilitate larger tires. Depending on your vehicle, Tuff Country kits are available in Add-a-Leaf spring or billet aluminum lift block options. Some kits include rear shocks and struts; all are designed to retain the factory rake look (with the rear-end slightly higher than the front-end). Each component is made of high-quality materials for long-lasting performance and engineered to help maintain an OE ride on all vehicles. Order the EZ-Install lift kit recommended for your application.
Not Yet Reviewed
$348.99
—
$487.99
$314.09
—
$439.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
