Availability
Showing In Stock Items. Show All 55 Items.
Dorman power steering racks are newly manufactured power steering rack and pinion assemblies that are an upgrade to the factory unit. Each rack features improved seals, free programming and pre-loaded software with a calibration tool. With this software and tool you don't have to take your vehicle to the dealer just to get it programmed. All this convenience—and you get Dorman top-of-the-line quality by each power steering rack unit going through rigorous testing to meet all federal motor safety standards.
( 1 )
$1,679.99
—
$2,020.99
BMR Level 2 suspension handling packages are matched and developed to handle the twists and turns of your favorite road. Installation of these American-made components takes only a few hours of your time with basic hand tools. You can install superior handling on your ride today with BMR Level 2 Suspension handling packages. These BMR Level 2 handling packages include: * Lowering springs * Front and rear sway bars * Bilstein shocks * Upper and lower A-arms * Rear upper and lower control arms * Control arm mount braces
( 8 )
$2,349.00
Upgrade your Bronco's off-road capability with an all-new, complete, ready-to-install steering gear from Ford Performance Parts. These severe-duty rack and pinions feature a higher torque motor and improved and reinforced steering gear casing from the Bronco Raptor, stronger inner tie rods with improved articulation, and reinforced outer tie rods with increased deflection ball joints. They significantly reduce steering efforts in various off-road conditions. Additional details: * Requires Ford Pro-Cal 4 to program and configure the steering gear * 2.7 Bronco with Performance Tune - M-9603-B27 * 2.3 Bronco with Performance Tune - M-9603-B23 * Pro-Cal 4 Tool only (minimum required to complete install) - M-12655-F * Steering upgrade kit includes Pro-cal voucher for steering gear calibration * Fitment: --- 2021-24 2-door (all models) are compatible --- 2021-24 4-door Bronco with Sasquatch package --- 2021-22.5 4-door Bronco Wildtrak * Module configuration required * Note: Pro-Cal 4 needs to be connected to the vehicle before the original steering rack is removed to be able to properly configure and program the new steering gear. * Exclusions: 2021-23 Bronco 4-door base, Big Bend, Outer Banks, Black Diamond, and Badlands that do NOT have the factory Sasquatch Package.
Not Yet Reviewed
$1,125.99
Made from heat-treated 4140 chromoly spring steel, these Hellwig anti-sway bars reduce body roll, even during tight cornering. They come with high-durometer polyurethane bushings to ensure superior performance—and install easily with basic hand tools. Mounting hardware is included.
( 569 )
$269.00
—
$986.45
RideTech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with RideTech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck
Not Yet Reviewed
$3,995.00
—
$4,315.00
BMR sway bars are the most significant handling upgrade you can make to your vehicle. With hand tools and about an hour or so of your time, BMR sway bars will deliver the most noticeable handling improvement to your ride. BMR chooses to cold form their tubular sway bars instead of the conventional hot formed process. For you that means better resistance to torsional fatigue, more consistent "memory" retention, and money well spent for lasting performance and driving enjoyment. BMR put countless hours into developing and testing the ideal rates for their bars, so feel their passion for perfection by installing one of their sway bar kits--you're in control with BMR Suspension.
( 102 )
$259.95
—
$599.95
Flaming River Chevelle power rack and pinion cradle kits offer classic bolt-in technology. These power cradle kits mount in your chassis' existing factory holes--no cutting, drilling, or welding is required--and basic hand tools get the job done easily! Add a lighter, more responsive steering system with a full turning radius to your classic vehicle, with American-made Flaming River Chevelle power rack and pinion cradle kits. Many Chevelle rack and pinion kits are delivered with: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints * Power steering pump * Pulley * Shafting * Reservoir * Billet swivel floor mount * Sway bar for added stability * On some models, painted or polished tilt steering columns are available options
( 1 )
$2,302.99
—
$3,239.99
OER offers a wide selection of steering components for many make and model vehicles, including steering gearboxes. The gearbox in your vehicle makes it possible for you to steer the vehicle to the desired direction. Steering can become a matter of concern if your steering gearbox starts to fail. If you're sure the gearbox is the culprit for poor driving performance, you need a compatible replacement to help you regain steering control. OER steering gear boxes are manufactured with all new tooling replicating the original ratio for a correct replacement. Restore the steering performance of your vehicle with the OER steering gear box designed for your application.
( 1 )
$261.99
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$209.95
—
$449.95
Dial in your ideal ride quality with the independently adjustable compression and rebound valving of QA1 Proma Star double adjustable coilover systems. They offer the perfect balance of street-ability and performance and are an ideal choice if you plan to use your car on the road and occasionally take it to the track. With QA1 Proma Star double adjustable coilover systems you will improve overall handling, increase suspension tunability, and gain the ability to adjust ride height quickly and easily for a perfect stance and corner balance your car, maximizing performance. They are easy to install with basic hand tools in the factory mounting locations and does not require the use of a toe link relocation kit. Coilovers are available with multiple spring rate options to help you find the perfect option for your intended use. The medium springs are great for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering, and providing a more planted feel.
( 3 )
$1,682.95
QA1 1961-71 D100 independent front suspensions update your classic 2WD Dodge truck with coilover shocks and rack-and-pinion steering. The IFS kits instantly transforming the old-school feel of leaf springs and a straight axle to greatly enhanced truck performance with late-model drivability and the perfect lowered stance. QA1 coilovers make it easy to achieve the ideal look while tuning ride characteristics to meet your unique needs. Choose from kits that offer 3 to 4 in. of drop or 5 to 6 in. of drop to lower the front of your truck while gaining much better geometry. You also have the choice of single or double-adjustable coilovers. Kits come complete with everything you need to bolt in the system. Contents and features of QA1 D100 IFS kits: * Front crossmember * Tubular control arms * Steering rack * Spindles * Ball joints * Inner/outer tie rods * All necessary installation hardware * The kits can be bolted in with simple hand tools without any cutting, welding, or the use of a lift, and can be completed without removing the inner fender aprons * Single-adjustable shocks are recommended for trucks that will be used primarily on the street * Double-adjustable coilovers are recommended for trucks that will consistently be used for drag racing, autocross, or road racing
Not Yet Reviewed
$3,977.95
—
$4,042.95
Flaming River 1968-72 Chevelle power rack and pinion cradle kits modernize and strengthen your current steering system. The precision JIG-welded units install with basic hand tools into your stock steering mounting holes, beefing up your rack gear and still allowing for a full turning radius. Whether you have a small or big block engine, these kits use a unique travel bar system that connects new tubular inner tie rod ends to the original pivot points to reduce bump steer. Numerous kits are available with or without a tilt column and steering pump; and most include wiring connectors, universal joints and shafting, mounting hardware, a billet swivel floor mount, and a polished aluminum mounting reservoir. Enjoy an updated steering system that's lighter and stronger with a Flaming River 1968-72 Chevelle power rack and pinion cradle kit.
( 1 )
$3,506.99
—
$4,813.99
Flaming River 1960-65 Comet/Falcon power rack and pinion cradle kits add modern steering to your classic! These conversion kits require no cutting, drilling, or welding; they simply bolt into your vehicle's original mounting holes using basic hand tools. The units provide more than 6 in. of travel and a full turning radius—and are available with a floor shift or column shift tilt steering column, or no column at all. Flaming River power rack and pinion cradle kits are fluid- and pressure-tested before shipping. Order the model recommended for your Comet, Falcon, or Mercury application. Kits include: * Rack and pinion cradle system * Mounting hardware required for installation * Wiring connector * Universal joints and shafts * Power steering pump and pulley * Polished aluminum mounting reservoir
( 4 )
$2,859.99
—
$3,534.99
Now you can easily give your C20 or R20 truck adjustable ride height, adjustable shock valving and improved geometry with QA1's 1967-1991 C20/R20 front coilover conversion systems. Each kit comes with QA1's proven single or double adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 upper and lower control arms are manufactured from steel tubing for increased strength and powdercoated for long-lasting durability; topped off with performance ball joints and low-friction, maintenance-free bushings. You can easily install the kit in your driveway or garage using basic hand tools. No welding required. Everything is included, all the way down to the hardware. Select the QA1 C20/R20 coilover conversion system for your application needs. Features of 1967-1991 C20/R20 front coilover conversion systems: * Kits are available with single or double adjustable coilover shocks (please specify kit needed when ordering) * Adjustable ride height with up to 1 in. to 3 in. of drop and up to 6 in. with aftermarket spindles * Retains 8-bolt wheels * Improves ride and handling * Single-adjustable shocks with 18 clicks of valving adjustment gives you a very simple way to adjust your shocks without taking them off the truck—you can simply soften or stiffen the ride by turning one knob * Double-adjustable shocks with 18 clicks of independent compression and rebound valving adjustment are great if you really want to fine-tune your shocks on the street or plan to track your truck * No welding required Fitment Notes: Total amount of ride height drop depends on wheel and tire fitment. Requires spindles that use 1971-1986 C20 ball joints.
Not Yet Reviewed
$2,668.95
—
$2,878.95
Replace the early long-shaft steering box in your 1962-67 Nova with Flaming River power rack and pinion cradle kits! These cradle kits mount right into the original chassis locations--no suspension modifications are needed! Flaming River Nova power kits provide a full turning radius, more responsive steering, and install using simple hand tools. You can choose kits with or without columns and for front or rear steer. The front steer reverses the OE steering arms and adds clearance for the use of almost any oil pan. Most power rack and pinion cradle kits include a power steering pump and pulley, a polished aluminum mounting reservoir, and they are pressure/fluid-tested and certified. Get a direct fit with everything you need to upgrade your classic with Flaming River 1962-67 Nova power rack and pinion cradle kits.
Not Yet Reviewed
$2,985.99
—
$3,959.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1963-64 Impala power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These kits feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—no cutting, drilling, or welding is required. (Some models do not include column and/or power steering pump.) Power rack and pinion kits, designed for a floor shift column, include: * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Aluminum mounting reservoir (hoses sold separately) * Tilt column (available on some models)
Not Yet Reviewed
$2,420.99
—
$3,774.99
Detroit Speed Chevy II subframes are bolt-in replacements for the original stock subframe. They improve the handling and ride quality by utilizing Detroit Speed's unique suspension geometry. These are the ONLY Chevy II frames in the aftermarket industry with OEM-quality stamped crossmembers for improved structural rigidity. The bay bars feature rigid integral hood hinge mounting and are hidden when used with Detroit Speed's Chevy II Inner Fenders package. Order the Chevy II front frame model with the coilover options preferred for your application. Subframe suspension kits include the following components: * Tubular upper and lower control arms * Aluminum body coilover shocks * Torrington bearings * Coilover springs * Power rack and pinion steering * Integrated splined sway bar * Control arm cross shafts with caster tuner bushings • Forged Detroit Speed spindle • Composite sway bar bushings • Spanner tool for easy shock adjustments
Not Yet Reviewed
$9,804.95
Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.
Not Yet Reviewed
$2,118.99
—
$3,405.99
Flaming River Impala/Caprice power rack and pinion cradle kits help deliver precision steering on your restoration vehicle. They have a full lock-to-lock turning radius and an adjustable pinion angle. These assemblies also utilize a travel bar design to properly position the steering pivot points to the original location and turning radius. The stabilizer guide clamp provides added stability while driving. Flaming River rack and pinion systems use the factory tie rods to connect the travel bar to your vehicle's spindles. These kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—and no cutting, drilling, or welding is required. Impala/Caprice kits include: * Floor shift tilt steering column * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley
Not Yet Reviewed
$3,598.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1965-69 Impala/Caprice power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These systems feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly--no cutting, drilling, or welding is required. (Some models do not include a column and/or power steering pump.) Most kits include: * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley * Floor shift tilt steering column (available on some models)
Not Yet Reviewed
$3,476.99
Chassis flex is one of the primary enemies of good handling and efficient suspension. The front tires can't stay planted if your strut towers lack the rigidity they need. Now, you can stiffen and reinforce the front-end of your chassis with Steeda strut tower braces! These chromoly steel bars are available in 2- and 3-point configurations for fitment on a variety of Ford Mustang, Focus, and Fusion models, as well as the Lincoln MKZ. Each brace is black powdercoated to resist rust and corrosion, and the easy bolt-in installation takes only minutes with common hand tools. You'll notice immediate improvement in ride quality and control. Order the Steeda strut tower brace designed for your specific vehicle.
( 18 )
$189.95
—
$219.95
For those who want a bolt-in, no modification required, heavy-duty steering system for many Jeep Wranglers and Gladiators (2007 and up), Steer Smarts has the solution for you. This one-click kit includes a Yeti XD tie rod, bottom mount drag link, and 1 5/8 in. aluminum damper bracket. You can round out the front-end trifecta by adding Steer Smarts' Yeti XD front adjustable track bar for the ultimate front-end setup. * Note: Not compatible with stock JK or Super Duty Dana 60 axles. Only with upgraded aftermarket DANA Ultimate Dana 60 axle Product features: YETI XD TIE ROD + DRAG LINK ASSEMBLIES: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences BALL JOINTS: * 30mm 1 1/2 ton ball joints are designed specifically for the JK with a UD60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme-duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure ball joints' life is long-lived. These superior seals have been rigorously tested to minimize leakage between grease service intervals which significantly improves ball joint reliability over the competition * Fully greaseable TIE ROD + DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology on the passenger-side ends prevents linkage from unwanted flopping/rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBES: * Tie rod and drag link adjusters are manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability * Yeti XD tie rod and drag link fit all left-hand drive JK Wrangler models 2007-2018 equipped with a Dana UD60 (68.5 in. wide)
Not Yet Reviewed
$1,035.00
—
$1,045.00
BMR Suspension cradle chassis braces provide an affordable way to lessen wheel hop and cradle movement on your vehicle. These lightweight, 100 percent bolt-on "stiffeners" use existing bolt holes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the steel braces greatly reduce cradle deflection. BMR cradle braces are offered in various powdercoat finishes for long-lasting good looks and service life. Available individually or in pairs, choose the braces designed for fitment on your vehicle application.
( 4 )
$229.95
VIAIR 444C dual onboard air systems deliver the vital compressed air source you may need, from the worksite to off-road adventures. These dual OBA setups are capable of inflating up to 40 in. tires, managing air locking differentials, and running your air tools. They include an air tank, compressors, hose, and all components needed to make the systems work. Follow the roads or forge your own trails—but go with the power and confidence that VIAIR 444C dual onboard air systems supply. VIAIR 444C dual OBA systems feature: * 2.5 gallon 200 psi VIAIR air tank * Two 444C VIAIR compressors * 30 ft. coil hose with quick-connects * Tire inflation gun with 200 psi gauge * 0-220 psi pressure regulator * Sealed pressure switch—165 psi on, 200 psi off * Two 40-amp relays * Inline fuse holder * 1/4 in. quick-connect coupler (M) * 1/4 in. 250 psi safety valve * 1/4 in. drain cock * Two 1/8 in. BSP to 1/4 in. NPT fittings * Three 1/4 in. compression fittings * 5-piece 1/4 in. NPT plugs kit * 6-port billet manifold with mounting bracket (1/4 in.) * Two 15 ft. 1/4 in. air lines * Electrical connections
Not Yet Reviewed
$919.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
