Availability
Showing In Stock Items. Show All 51 Items.
For those who want a bolt-in, no modification required, heavy-duty steering system for many Jeep Wranglers and Gladiators (2007 and up), Steer Smarts has the solution for you. This one-click kit includes a Yeti XD tie rod, bottom mount drag link, and 1 5/8 in. aluminum damper bracket. You can round out the front-end trifecta by adding Steer Smarts' Yeti XD front adjustable track bar for the ultimate front-end setup. * Note: Not compatible with stock JK or Super Duty Dana 60 axles. Only with upgraded aftermarket DANA Ultimate Dana 60 axle Product features: YETI XD TIE ROD + DRAG LINK ASSEMBLIES: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences BALL JOINTS: * 30mm 1 1/2 ton ball joints are designed specifically for the JK with a UD60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme-duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure ball joints' life is long-lived. These superior seals have been rigorously tested to minimize leakage between grease service intervals which significantly improves ball joint reliability over the competition * Fully greaseable TIE ROD + DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology on the passenger-side ends prevents linkage from unwanted flopping/rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBES: * Tie rod and drag link adjusters are manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability * Yeti XD tie rod and drag link fit all left-hand drive JK Wrangler models 2007-2018 equipped with a Dana UD60 (68.5 in. wide)
Not Yet Reviewed
$1,035.00
—
$1,045.00
UniSteer rack and pinions are designed to provide precision steering for easier driving. Made from cast aluminum with a variety of finishes available, these replacement racks can be ordered to complement either manual or power-assist configurations. They're offered in fitment applications for a wide range of year, make, and model vehicles. Accessories included will depend upon the model you select. Better steering control begins with UniSteer! UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 54 )
$1,150.99
Flaming River Chevelle power rack and pinion cradle kits offer classic bolt-in technology. These power cradle kits mount in your chassis' existing factory holes--no cutting, drilling, or welding is required--and basic hand tools get the job done easily! Add a lighter, more responsive steering system with a full turning radius to your classic vehicle, with American-made Flaming River Chevelle power rack and pinion cradle kits. Many Chevelle rack and pinion kits are delivered with: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints * Power steering pump * Pulley * Shafting * Reservoir * Billet swivel floor mount * Sway bar for added stability * On some models, painted or polished tilt steering columns are available options
( 1 )
$2,302.99
—
$3,469.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1963-64 Impala power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These kits feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—no cutting, drilling, or welding is required. (Some models do not include column and/or power steering pump.) Power rack and pinion kits, designed for a floor shift column, include: * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Aluminum mounting reservoir (hoses sold separately) * Tilt column (available on some models)
Not Yet Reviewed
$2,420.99
Borgeson power conversion kits steer you in the right direction. With true modern power steering feel and feedback, these kits also offer sporty ratios to equip your classic ride with up-to-date precision. Borgeson power conversions are bolt-on kits available for both factory manual and power steering cars. They include re-manufactured integral power steering gearboxes designed to bolt to your stock mounting locations. So, whether you want to convert your manual steering or update your old factory power steering, Borgeson offers a no-cut, no-weld, no-loss of turning radius solution.
( 131 )
$958.96
—
$1,019.42
UniSteer Camaro/Nova rack and pinion kits are superior steering components designed with racers in mind. They're engineered to match the factory geometry for specific Chevy model years—resulting in no-bump steering. These racks come mounted on a custom bracket that makes installation a breeze. The unit mounts to the rear of the crossmember, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms; no fabrication is required. Compact and lightweight, the parts offer maximum ground clearance and can drop up to 65 lbs. off the stock front end. UniSteer rack and pinion kits also include outer tie rods, mounting bracket, hardware, and instruction sheet for installation. Order the conversion kit tailored for fitment on your vehicle. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 18 )
$768.99
—
$1,084.99
Flaming River 1988-98 Chevy C1500 truck power rack and pinion cradle kits are direct bolt-ins with precision welded cradles manufactured using a 3/8 in. steel plate to assure there is no flexing. Each kit adapts to the original steering column and includes a new slip shaft with U-joints and a hose kit. They have been designed for use with the original power steering pump and the travel bar maintains original geometry. Features: * Designed for use at factory ride height or with 4/6 lowering kit * Solid plate 3/8 in. steel for increased strength * Bolts in place of steering box and idler arm using OE mount locations * Precise, modern steering with no cutting, drilling, or welding to chassis * Features new front steer power rack and pinion * Rack and pinion features .98 in. rack shaft for increased strength * Billet servo valve for cooler operation * Lifetime serviceability and Flaming River tested and certified Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system
Not Yet Reviewed
$2,508.99
Crown Automotive steering kits remain an affordable way to eliminate slack in your old OE linkage. Each kit includes tie rod ends, adjusters, and mounting hardware, as well as a steering stabilizer. Crown steering assemblies are engineered to exactly match the factory design, so they're guaranteed to bolt in place of your original linkage without any hang-ups. Order the kit tailored for fitment on your vehicle.
( 11 )
$318.99
Flaming River 1965-70 Mustang power rack and pinion cradle kits can upgrade your classic Pony's steering system. The patented conversion kits are stronger, lighter, and more responsive. They also retain the full factory turning radius and offer more travel than your OE system! Mustang power cradle kits feature a welded cradle that bolts right in—no cutting, drilling, or welding is required! They're available to fit with the original or Granada spindles, and come with or without columns that are paintable or polished. Each kit also includes mounting hardware, wiring connectors, universal joints, a power steering pump, a billet bracket and pulley, and a polished aluminum reservoir. All are fluid and pressure-tested before shipping. Order the model recommended for your Mustang application.
( 8 )
$2,019.99
—
$3,374.99
Flaming River 1963-66 Corvette power rack and pinion cradle kits improve horsepower, performance, and road handling. The kits include hardware, universal joints, cradle, and quick-ratio rack and pinion. The all-new components bolt into existing chassis and original mounting locations with no suspension modification, providing a stronger rack shaft, a longer cylinder and overlapping tube design, and more than 6 in. of travel for full-turning radius.
( 1 )
$2,486.99
Low Range Off-Road Align-Correct HD crossover steering kits will make your tires avoid slipping while following the path of a turn. The kits are offered in 3 levels: Full kit, Stage 1, and Stage 2 add-on kit. It's time to improve your steering with the strength and reliability of LROR Align-Correct HD crossover steering kits. Full kits include: * Steel steering arm * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty drag link, full 1/4 in. wall DOM tubing * Heavy-duty tie rod, full 1/4 in. wall DOM tubing * High Speed Steel (HSS) tie rod taper reamer * Class 8.8 metric bolts and washers Stage 1 kits include: * Steel steering arm * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty drag link, full 1/4 in. wall DOM tubing * High Speed Steel (HSS) tie rod taper reamer * Class 8.8 metric bolts and washers Stage 2 add-on kits include: * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty tie rod, full 1/4 in. wall DOM tubing
Not Yet Reviewed
$433.25
Flaming River 1968-74 Nova Power rack and pinion cradle kits bolt into the existing chassis with no suspension modification. The power rack and pinion provides a quick steering ratio with full turning radius, installs easily using the existing chassis hole locations. They also feature a stronger 1 in. diameter rack gear and more than 6 in. of travel and full turning radius.
Not Yet Reviewed
$2,249.99
—
$2,559.99
Swap your steering box setup for a lighter, more responsive modern steering system in your classic. Flaming River 1970-81 Camaro power rack and pinion cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes. The kits include your choice of tilt key columns or no-column, a stronger 1 in. rack gear, a billet-joint and column adapter, mounting hardware, a polished aluminum mounting reservoir, and a power steering pump and pulley. All included to allow you more than 6 in. of travel and a full turning radius. Enjoy driving your classic car with this upgrade-- Flaming River 1970-81 Camaro power rack and pinion cradle kits.
( 2 )
$2,572.99
—
$3,687.99
Flaming River 1960-65 Comet/Falcon power rack and pinion cradle kits add modern steering to your classic! These conversion kits require no cutting, drilling, or welding; they simply bolt into your vehicle's original mounting holes using basic hand tools. The units provide more than 6 in. of travel and a full turning radius—and are available with a floor shift or column shift tilt steering column, or no column at all. Flaming River power rack and pinion cradle kits are fluid- and pressure-tested before shipping. Order the model recommended for your Comet, Falcon, or Mercury application. Kits include: * Rack and pinion cradle system * Mounting hardware required for installation * Wiring connector * Universal joints and shafts * Power steering pump and pulley * Polished aluminum mounting reservoir
( 4 )
$2,859.99
—
$3,534.99
Flaming River 1967-1969 Camaro power rack and pinion cradle kits make it easy to enjoy modern comfort. These direct bolt-in steering kits feature their patented rack and pinion cradle system offering a quick steering ratio with a full turning radius! These power kits are fluid and pressure-tested and certified. Swap out your tired old system and transform your classic muscle into modern muscle you'll enjoy driving. Bolt up Flaming River 1967-1969 Camaro power rack and pinion cradle kits.
( 3 )
$2,073.99
—
$3,432.99
Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.
Not Yet Reviewed
$2,118.99
—
$3,405.99
Flaming River 1955-56 Chevy Power rack and pinion cradle kits deliver precision steering on your restoration vehicle. Their Billet-Power rack and pinion systems allow for a full turning radius. They are engineered to replace the early long shaft steering box. By mounting the rack on the cradle, they not only reinforce the chassis, but also provide increased ground clearance. The true fixture-welded mounting cradle fits between the frame rails and bolts in place using the original chassis location with no suspension modification. Order the model recommended for your specific application.
( 2 )
$2,125.99
—
$3,262.99
Convert your steering box application to Flaming River 1970-81 Camaro manual rack and pinion steering--without modifications! Their cradle kits offer a lighter, more responsive steering system for your classic ride. These unique Flaming River cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes! With your kit, you'll receive universal joints, a shaft support bearing, a mounting clamp, hardware, a billet swivel floor mount, and, of course, their patented rack and pinion cradle system. Kits are available with or without tilt key columns. Update your classic to enjoyable driving with Flaming River 1970-81 Camaro manual rack and pinion cradle kits.
Not Yet Reviewed
$2,075.99
—
$2,721.99
Flaming River 1965-70 Mustang manual rack and pinion cradle kits steer your classic with the benefits of modern steering systems. Durable, lighter, and more responsive, these cradle kits add strength and support, while offering an improved turning radius. Flaming River includes everything you need to install them, and the welded cradle bolts right into the original mounting locations--no chassis modifications needed. Kits are available with or without columns and all include wiring connectors, universal joints, shaft support bearings, Grade 8 hardware, and their patented rack and pinion cradle system. Update your Pony with comfort from the most complete rack and pinion kits--Flaming River Mustang manual cradle kits.
( 5 )
$2,401.99
—
$3,124.99
Flaming River 1967-69 Camaro manual rack and pinion cradle kits update your classic muscle with manual steering that feels like power! Your big or small block Camaro can enjoy these precision-designed, American-built cradle systems. Flaming River manual rack and pinion kits feature their patented, welded cradle that structurally reinforces the rack and bolts in your existing chassis mounting locations--no cutting, welding, or drilling is required! These lighter, more responsive systems are available with or without tilt columns (a key column is available for 1969 kits) and billet swivel floor mounts. Universal joints, wiring connectors, and mounting hardware are also included. Enjoy travel and ratio with a full turning radius--steer your classic with bolt-on Flaming River 1967-69 Camaro manual rack and pinion cradle kits.
Not Yet Reviewed
$1,663.99
—
$3,443.99
Your Tri-five classic just got better with Flaming River 1955-57 Chevy manual rack and pinion cradle kits. You love your Chevy, and now you'll love driving it even more! These kits are unique, easy-to-install systems offering less weight, more strength, and a full turning radius. These Chevy kits feature their patented welded mounting cradle with a rack that bolts in place using the original chassis location, providing the reinforcement of your chassis and more ground clearance! They also include mounting hardware, a wiring connector, universal joints, and a swivel floor mount. Polished or paintable tilt columns are separate options. Whichever you choose, you're sure to enjoy driving your American classic even more! Give your classic a bit of modern technology with Flaming River 1955-57 Chevy manual rack and pinion cradle kits.
( 4 )
$1,847.99
—
$2,653.99
BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.
( 1 )
$979.95
—
$1,009.95
Flaming River 1967-68 Camaro power rack and pinion cradle kits can upgrade the steering system on your classic musclecar! These direct bolt-on systems are stronger, lighter, and more responsive than original equipment. Like Flaming River's manual setup, the power rack and pinion provides a quick steering ratio with full turning radius. The units install using the existing chassis locations on late '60s Camaros and Firebirds. They're available with or without the steering column.
( 1 )
$2,339.99
—
$2,706.99
Rugged Ridge heavy-duty steering kits beef up your Jeep. Bolt-on solutions for preventing bent tie rods from wheeling with larger tires, they are SAE 1018 steel that is cold rolled, pierced, and drawn through dies to produce a heavy wall thickness with no seams or welds to fail. They feature heavy-duty rod ends with standard tapered ends to fit stock knuckle applications. The Rugged Ridge crossover steering conversion kits replace the bump-steer prone inverted Y-type steering system, connecting the drag link to the end of the tie rod at the wheel, giving a better steering angle and better leverage. If your vehicle is lifted a crossover steering system is a must!
( 11 )
$419.99
—
$659.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
