Availability
Showing In Stock Items. Show All 43 Items.
Instant Rebate
Reduce overall chassis flex on your musclecar with the addition of Heidts subframe connectors. They will improve your chassis's integrity and provide a solid foundation for the rest of your performance enhancements. Don't let your musclecar get out of shape. Keep it solid and fit for the winding road ahead with Heidts subframe connectors.
( 7 )
$289.80
UMI Performance bolt-on 3-point subframe connectors increase chassis stiffness, performance capabilities, and overall drivability. Their setup is designed to tie the front and rear subframes together, adding additional cross-bracing throughout the center of the vehicle and protecting it to its fullest, while keeping ground clearance issues to a minimum. This spider web effect greatly improves your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Additional features include: * Constructed from 1.750 in. x 0.120 in. DOM mild steel tubing * 3-point brace uses 1.250 in. x 0.095 in. DOM mild steel tubing * Front mounting points feature 0.250 in. thick mild steel mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * MIG-welded construction * Durable powdercoated finish
( 10 )
$499.99
The more improvements you do to the vehicle, the more demands are put on the body. These Global West subframe connectors provide additional support to increase the integrity of the chassis. They are a must for any performance application. They're built out of round 1 5/8 in. x .125 in. wall roll cage tubing. The construction attaches to the factory support rails located directly under the front seats. The rear portion of the subframe attaches to the rear leaf spring mount and frame rail. Additional gussets are included in the kit, which add support to the rear spring mount. Welding is required for installation.
( 97 )
$350.75
Instant Rebate
Heidts bolt-on subframe connectors are carefully formed to fit the contour of your stock floor. They require no cutting or welding (but can be welded, if you wish) to install, allowing you to retain your stock exhaust, fuel, and brake lines. Heidts connectors are powdercoated black to insure long life and good looks. They come complete with Grade 8 hardware and instructions. Preserve the consistency and performance of your Uni-body chassis with Heidts subframe connectors.
( 12 )
$289.80
—
$347.40
H&R Sport sway bars are designed for drivers who desire improved handling without lowering or affecting ride quality. These Sport sway bars increase your suspension's roll stiffness-or its resistance to roll in turns, while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R's steel Sport sway bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness-giving you an unmatched level of precision and performance. Most Sport sway bar kit applications include H&R's legendary Poly/PTFE bushings that prevent squeaks and also eliminates the need for lubrication. No mess, no maintenance—just a perfect fit! Choose the sway bar designed for your application needs.
Not Yet Reviewed
$348.99
—
$388.99
Summit Bucks
Are your leaf springs worn-out and on their last leg? Do you need a little boost to keep your classic Chevy from sagging? Real Deal Steel stock height leaf springs are high-quality, US-made products. They include pre-installed forward eye bushings. The 5-leaf springs will provide a firmer ride than the 4-leaf spring. The 5-leaf springs came stock on all station wagons and convertibles, but are an excellent upgrade for all other body styles.
( 31 )
$359.99
—
$369.99
Lares offers brand new power rack and pinions for a variety of applications. Engineered to OE specifications, each unit is inspected, adjusted, and hydraulically tested. These assemblies convert the rotational motion of your steering wheel into the linear motion needed to turn the wheels. Rack and pinions are backed with a Limited Lifetime Warranty (or one-year for commercial use). Order the model recommended for your vehicle.
( 9 )
$280.99
—
$497.99
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$329.95
—
$449.95
Clearance
Unity Automotive air spring to coil spring conversions solve the problems associated with troublesome air spring suspension and electronic suspension. These kits include parts and hardware, allowing you to convert to a more conventional setup. Improve handling and consistency without the sacrifice of ride height or quality with the Unity Automotive air spring to coil spring conversions designed for your application.
( 5 )
$264.99
—
$494.99
On Sale
Stifflers Suspension Mustang FIT (Fully Integrated Technology) systems offer a proven way to keep your Mustang's muscles fit! The FIT system integrates the front and rear subframes and ties them into the rocker panels to form a triangulated web of strength and stiffness that helps keep your car in shape for improved handling, launches, and ride quality. The strong steel stiffeners beef up your Mustang for an increased range of suspension tuning and overall performance. Twisting and bending is good conditioning for humans--not vehicles. The best exercise for your Mustang is Stifflers FIT system. Stifflers Mustang Fit System benefits include: * Transfers more power to the ground, not wasting it twisting and bending the chassis * Launches straighter * Stiffer chassis reduces or eliminates interior rattles and extends the life of the vehicle * Weld locations are free of powdercoat--no removal of powdercoat required before installation * Non-intrusive design; no floors to cut, interior to remove, or lines to relocate * Tube ends are sealed to keep out moisture * Ground clearance remains unchanged * Increases side impact safety * Can be used with factory convertible braces with only slight modifications
( 3 )
$354.95
$319.46
Instant Rebate
Many vehicles use rack and pinion steering, where the steering wheel turns the pinion gear, the pinion moves the rack, converting circular motion into linear motion along the transverse axis of the car. Heidts is an industry leader in hot rod and muscle car parts that you can trust for quality. They offer several choices of manual and power rack and pinions (rack only), as well as kits (may include hardware, tie rod ends, spacers, etc.). Constructed from premium materials, they allow you to replace or upgrade the units that are included with Heidts front suspension systems. Choose a rack and pinion or kit designed for your vehicle's application.
( 1 )
$491.40
OER Authorized bolt-in IFS conversion kits are available for 1947-54 GM pickups with a V8 engine. The kits will improve your vehicle's ride, handling, and performance. These steel crossmember kits convert your antiquated stock front suspension and steering box to a more modern 1974-78 Mustang II or 1974-80 Pinto/Bobcat setup. Enjoy better handling with the addition of rack and pinion steering and twice the suspension travel when compared to stock. Combine this advancement in steering and suspension with the added benefit of modern braking power, and this setup becomes a no-brainer. The bolt-in kit is designed for use on 1947-54 Chevy 1/2 ton or light-duty 3/4 ton frames, and will drop the ride height approximately 2 1/2 to 3 in. using stock Mustang II front spindles. Lower control arm pivot tubes and gussets are not included in this kit. (A weld-in crossmember it is also available, if preferred.) Specs: * Bolt-in components. No welding required * Proven Mustang II geometry * Can use stock 1974-78 Mustang II or 1974-80 Pinto suspension components, except control arms. * Requires tubular control arms (strut-less style lowers) * Interlocking bolt-in boxing plates reinforce frame for strength * Requires power steering rack * Stock spindles will drop ride height 2-1/2" - 3 inches * Will work with small block or big block Chevy engines * Not for use with air-ride front ends Note: Additional items may be needed to complete installation, including but not limited to tubular control arms, spindles, coilover springs/shocks, rack and pinion steering, tie rods, calipers, rotors, inner tie-rod extensions. Important: Lower control arms need to be level with the ground (with all the weight on the vehicle) for correct steering geometry.
( 1 )
$404.99
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 589 )
$319.99
—
$332.99
Replace your factory parts with Belltech muscle car leaf springs for increased handling and a sleek, lowered stance. By recalculating the arch and compensating with the appropriate spring rate, these leaf springs easily lower the rear of your muscle car by up to 4 in., depending on the application. Or, if you prefer not to lower, muscle car leaf springs are available in stock height as well. These direct OEM replacements are painted black for durability and come complete with high-quality, OEM-style bushings for your American muscle. Get quiet operation, ride comfort, and a great look when you add Belltech muscle car leaf springs.
( 10 )
$252.00
—
$265.00
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$449.95
$403.95
Doug's Headers offers engine swap transmission crossmembers for a variety of classic Chevrolet and GMC applications. They are CAD-CAM designed, welded steel with a durable black powdercoat finish for proper fit, strength, and appearance. Ideal for 2WD trucks with GM LS and LT engines, one part number fits with ALL popular late-model manual and automatic transmission swaps. The crossmembers come complete with necessary hardware and detailed instructions. Notes: * Designed to clear up to 3 in. exhaust systems with no loss of ground clearance * Designed for use with Doug's Headers line of LS engine swap products
( 5 )
$335.25
ST Suspensions offers heavy-duty leaf springs for hundreds of vehicle applications. They're available for stock height and lowered applications, delivering a higher level of handling not found in mushy factory springs. Order two for a complete set.
( 7 )
$349.00
Complete your suspension upgrade with Eibach anti-roll sway bar kits. They reduce body roll over stock bars through increased design stiffness. The result is better handling and cornering grip in any performance-driving situation. Eibach sway bars are manufactured from cold-formed steel alloy for precision performance, and finished with a long-lasting red powdercoat. Order the Eibach anti-roll kit designed to fit your application. Product features: * Depending on application, some kits come complete with all mounting hardware, while others may require separate mounting kits * Unimpaired spring comfort at bilateral spring deflection * Decreasing the load difference between the wheels inside and outside the curve * Impacting the under- or over-steering tendency positively (auto-steering behavior)
( 72 )
$255.00
—
$285.00
ST Suspensions rear sway bars connect your wheels for exhilarating performance and fantastic handling! ST anti-sway bars are cold-formed from high-quality spring steel, then finished with a durable powdercoat to beef up the rear end of your vehicle—and support your sportier, more agile driving style. The increased stiffness will reduce body roll when hard cornering, as well as improve traction and balance. ST offers rear sway bars in sizes for countless applications; order the kit recommended for your vehicle—and get set up for maximum performance.
( 51 )
$369.00
UMI Performance tubular subframe connectors are designed to tie the front and rear subframes together using bolt-in hardware supplied and they require no welding! Subframe connectors improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Their setup tucks tightly against the floor using strong tubing, causes no ground clearance loss, and cannot be seen from the side of the vehicle. Additional features include: * Constructed from chromoly or mild steel tubing * Front mounting points feature 0.250 in. thick mild mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * Tubular design allows for a tighter fit against the vehicle's undercarriage * Uses rear control arm mount for increased strength and ensures proper installation * MIG-welded construction * Durable powdercoated finish
( 39 )
$349.99
One of the best improvements you can make to your muscle car is the addition of Belltech anti-sway bars. The reduction of boat-like body roll not only creates a more confident driving feel, but keeping the body flat in turns and during emergency maneuvers increases the safety factor as well. Incorporating 20+ years of design experience, Belltech anti-sway bars are designed to improve handling and steering response by minimizing body roll while not affecting ride quality. These sway bars are manufactured from cold-formed solid steel and use swedged ends for their superior strength and reliability.
( 50 )
$272.00
—
$435.00
Alston Racing bolt-on subframe connectors are carefully formed to fit the contour of your vehicle's stock unit body floor. No cutting or welding is required for installation, allowing you to retain your stock exhaust, fuel, and brake lines. In about four hours, you can preserve the consistency and performance of your uni-body chassis. Additional features of Alston Racing bolt-on subframe connectors include: * Easy installation * Complete with Grade 8 hardware and instructions * Powdercoated to ensure long life and good looks * Can also be welded in
( 24 )
$356.00
Prevent your rear axle from moving side to side with BMR Suspension panhard bars. Factory bars use rubber bushings, allowing for deflection under a load. BMR panhard bars are made from heavy-walled tubing and employ either greasable polyurethane bushings or heavy-duty spherical bearings. Adjustable versions feature left hand and right hand threads for easy "on-car" adjustment. They are a must-have when lowering your ride or trying to fit the widest tires possible in your wheelwell.
( 100 )
$299.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$359.95
—
$375.95
$323.95
—
$338.35
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
