Availability
Showing In Stock Items. Show All 19 Items.
Chassis Engineering transmission crossmembers are offered for a variety of applications. Whether you choose their bolt-in or weld-in styles, their selection of universal units will fit most standard or automatic transmissions, and they come available with five separate drops. Plus, they can be cut to the width you need to fit your frame. Chassis Engineering also offers a collection of car and transmission-specific crossmembers that will save you fabrication time. All are made from strong steel to provide the support that you need for your restoration project.
( 6 )
$340.00
Specifically designed for Toyota Tacoma trucks, the Trail-Gear Rock Defense dual T-case crossmembers provide a sturdy secure transfer case mount, while also providing superior transfer case protection while sliding across any rocks your vehicle can tackle. The Rock Defense T-case crossmembers are made from 3/8 in. thick 1010 steel, so you have confidence that your transfer case is supported and covered when you are sliding over even the nastiest rocks. These crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets. Trail-Gear also offers single transfer case crossmember kits. Both dual case and single case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when upgrading to dual cases. You simply bolt dual case crossmember into the same bracket, all that is needed is an additional T-case mount. Features and benefits: * Fits 1995-2004 Tacoma T-cases, automatic and manual transmissions, and uses your stock T-case mount(s) * Rock Defense T-case crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets * Supplied mounting brackets are 1/4 in. thick 1010 steel and all necessary Grade 8 mounting hardware is included with top locking nuts * Both single and dual case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when you upgrade to dual cases—simply bolt the dual case crossmember into the same bracket, all that is needed is an additional T-case mount (sold separately) * Crossmembers are shipped unpainted and should be painted or powdercoated before being installed
Not Yet Reviewed
$399.99
AEM Induction Performance strut bars help stabilize the tops of the struts by locking them together. This reduces strut movement in extreme situations, as well as noise, vibration, and harshness. Manufactured from 1 1/2 in. steel tubing for great strength and light weight, these strut bars will clear stock and aftermarket hoods. The braces are available in a variety of configurations for specific vehicles.
( 4 )
$252.99
—
$322.99
If you need to replace your driveshaft carrier bearing crossmember on your 1st Generation Tundra from rot and rust or damage, these carrier bearing crossmembers by Rust Buster have you covered with an OE replacement that matches up to the original perfectly. By utilizing the latest in Scanner Solutions and CAD Software, the engineering team at Rust Buster Frameworks Repair are able to capture your specific model truck's frame contours down to the smallest detail. These carrier bearing crossmembers are made from robust 11-gauge steel, providing exceptional strength and resilience, and are precision bent and welded. Rust Buster takes a modern approach and tailors each frame section to fit your vehicle and application with the unique vision that puts fitment, installation ease, and OE compatibility to the top of their priority list. Product details: * Fits 2000-2006 Toyota Tundra * Made from high-quality 11-gauge steel * Crossmember that driveshaft carrier bearing mounts on * Precision bent and welded for perfect fit ease of installation * Fits regular cab, access cab and double cab * Fits 4WD automatic transmission only * Includes mounting hardware * Part ships raw with rust preventative oil coating
( 1 )
$299.99
Elevate your truck or Jeep to new heights with Belltech's all-new suspension lift kit systems. They're precision-engineered to ensure every aspect was considered to provide you with the highest quality and best performance. Through innovative design with the focus on performance, these suspension systems are the best-riding lift kits on the market, period—built to ride, handle, and tackle off-road obstacles with ease! Here are details for Kit 152650BK: Give your truck the off-road look you desire with Belltech's new Ford Bronco Sport 1.5 in. Lift Kit. It allows the ideal amount of lift to add larger wheels to your vehicle, which not only improves its appearance and capability, but can also provide increased traction and grip while driving. This product was designed with straightforward installation, making for a quick and simplified change to your Ford. Included in the lift kit, are custom-designed, adjustable end links which are zinc coated to prevent rust. The end links ensure your OE sway bar does not make contact with any parts of your vehicle in its newly modified condition. To provide lift, the kit includes front strut spacers (which attach directly to the top of your OE front struts) and coil spacers for the rear. To maintain proper suspension geometry and keep your wheels centered within the fenders, this kit includes rear trailing arm drop brackets. All components are powdercoated to prevent rust and reduce wear. Furnish your new Ford with a unique look that will last with the new Belltech Ford Bronco Sport 1.5 in. Lift Kit.
Not Yet Reviewed
$465.00
Save time and money with a full All-Pro Off-Road suspension kit. These kits (without shocks) are intended for those who plan on using adjustable coilovers and need to complement them with a rear spring lift and adjustable control arms. Choose between Standard and Expedition leaf springs; optional bump stops are available. Each kit comes with a pair of All-Pro tubular chromoly upper control arms, extended brakes lines, and a U-bolt flip kit. Order the model recommended for your vehicle application. Product details: All-Pro upper control arms: * Tubular chromoly upper A-arms * Arms use 1.25 in. uniballs * New flush-mount hardware and spacers * Uniball spacers are CNC-machined from heat-treated stainless steel * Polyurethane bushings with thick inner sleeves * Includes Grade 8 and high-strength 12 pt. hardware * Gray powdercoat finish * Maximum wheel backspacing: 4.50 in. All-Pro Leaf Pack (choose Standard or Expedition): * A higher number of thinner leafs provides a smoother, progressive spring rate compared to fewer, thicker leaves * Double "military" wrap provides extra strength for the main leaf * "Torque Leaf," an extra half-leaf at the top of the spring pack, increases anti-wrap properties without hindering travel or ride quality * Diamond-cut leaf ends to eliminate stress points which may weaken leafs and lead to premature failure * PTFE anti-friction pads between leafs provide smoother flex, lessen spring wear, and reduce noise * Leafs are shot-peened after forming to relieve stress * Every completed spring pack is pre-cycled to their travel extremity for quality control and to reduce the likelihood of initial sag * Comprehensive 12-month warranty for non-racing applications when properly installed (Note: Using a lifting block or shackle flip with the All-Pro Off-Road springs will void the warranty on the springs.) All-Pro rear U-bolt flip kit: * All-Pro Off-Road U-bolt flip kit turns the U-bolts upside down so the bolt ends face up, away from the rocks. This mod both prevents damage to U-bolt threads and increases ground clearance. The kit comes complete with new heavy-duty U-bolts, plus hardened U-bolt nuts and washers. Tapped plates are also included in every kit. All-Pro rear extended brake lines: * These steel braided brake lines are great for your lifted Toyota. The rear brake lines are 24 in. and designed for stock ride up to a 4 in. lift. U.S. DOT-approved, they exceed all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106.
Not Yet Reviewed
$499.99
UMI Performance boxed weld-in subframe connectors are necessary chassis upgrades when racing and hard driving habits are present. UMI Performance boxed weld-in subframe connectors greatly improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter-panel flexing. Subframe connectors essentially tie the front and rear steel subframes together, resulting in a stiffened and strengthened chassis, allowing for better weight transfer and improved traction when launching. When strength is a concern, square tubing has greater torsion resistance over tubular designs. They will work with all aftermarket exhaust systems and will not affect ground clearance. Their weld-in style requires no bolts to tighten and offer less chance of flex when compared with bolt-in types.
( 23 )
$399.99
—
$449.99
UMI Performance tubular subframe connectors are designed to tie the front and rear subframes together using bolt-in hardware supplied and they require no welding! Subframe connectors improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Their setup tucks tightly against the floor using strong tubing, causes no ground clearance loss, and cannot be seen from the side of the vehicle. Additional features include: * Constructed from chromoly or mild steel tubing * Front mounting points feature 0.250 in. thick mild mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * Tubular design allows for a tighter fit against the vehicle's undercarriage * Uses rear control arm mount for increased strength and ensures proper installation * MIG-welded construction * Durable powdercoated finish
( 39 )
$340.38
—
$349.99
UMI Performance weld-on tubular subframe connectors tuck tightly against the floor, causing no ground clearance loss, and cannot be seen from the side of the vehicle. Their weld-in only setup ties the front and rear steel subframes together, resulting in a stiffened and strengthened chassis. Subframe connectors improve your car's handling ability and reduce T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road race, as well as drag race setups. Connecting the front and rear subframes allows for better weight transfer, improved traction, and straighter launches.
( 3 )
$329.99
—
$349.99
UMI Performance bolt-on 3-point subframe connectors increase chassis stiffness, performance capabilities, and overall drivability. Their setup is designed to tie the front and rear subframes together, adding additional cross-bracing throughout the center of the vehicle and protecting it to its fullest, while keeping ground clearance issues to a minimum. This spider web effect greatly improves your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Additional features include: * Constructed from 1.750 in. x 0.120 in. DOM mild steel tubing * 3-point brace uses 1.250 in. x 0.095 in. DOM mild steel tubing * Front mounting points feature 0.250 in. thick mild steel mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * MIG-welded construction * Durable powdercoated finish
( 10 )
$499.99
Unity Automotive is a premium air suspension line that combines innovation and craftsmanship to deliver a range of products for comfort and quality. They use the highest quality materials in the manufacturing of each air suspension product. Premium sleeves and bladders, aircraft-grade aluminum, and other top-shelf components ensure that these suspension air strut assemblies meet or exceed original equipment standards. New and reman models are available. Order the replacements recommended for your vehicle.
( 2 )
$414.99
Rock Jock heavy-duty tie rod ends for Currectlync steering systems are designed with a thicker diameter thread for added strength. This provides more durability for lifted and off-road vehicles especially. The grease fitting on each tie rod provides for increased performance and longevity. Tighten up your loose front-end steering with top-quality replacement parts from Rock Jock.
( 1 )
$431.00
Tuff Country offers all of the components that you need to create a high-quality suspension lift kit. All Tuff Country components are manufactured from top-grade materials to high-quality standards.
( 5 )
$411.99
—
$450.99
Unity Automotive air spring to coil spring conversions solve the problems associated with troublesome air spring suspension and electronic suspension. These kits include parts and hardware, allowing you to convert to a more conventional setup. Improve handling and consistency without the sacrifice of ride height or quality with the Unity Automotive air spring to coil spring conversions designed for your application.
( 5 )
$280.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
