Availability
QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.
( 22 )
$799.95
—
$854.95
UMI Performance bolt-in Viking rear coilover kits allow full ride height, spring rate, and damping adjustability. The double shear upper mount is a direct bolt-in and holds a true 2.5 in. diameter coilover spring. The FEA designed lower bracket bolts in using the standard shock mounting hole as well as an additional reinforcement hole. Drilling one 3/8 in. hole per side is required to complete installation. The coilover kits utilize Viking shocks that are 19-way adjustable in both compression and rebound to ensure the perfect setting for every application. Viking shocks are fully rebuildable. The 2.5 in. diameter coilover springs are available in 14 in. long, 110 lb. spring rate for drag use; 14 in. long, 125 lb. spring rate for street use; and 12 in. long, 150 lb. spring rate for autocross and road race applications. The coilover kits have been tested with 1.5 in. diameter UMI trailing arms, as well as UMI's 22mm sway bar and 32mm drag anti-roll bar. Fitment with other brand sway bars and larger diameter control arms is not guaranteed. Please contact UMI for additional information regarding fitment. Key features: * Brackets manufactured entirely from 3/16 in. mild steel * Laser-cut brackets for consistency and a precise fit * TIG-welded for superior strength and clean looks * Powdercoated brackets for a long lasting finish * Viking double-adjustable shocks offer 19 compression and 19 rebound adjustments * 3 spring rate options, depending upon application * Bolt-in design * No welding required * Spacers included for use with control arm relocation brackets
( 10 )
$909.99
—
$1,069.99
Classic Performance 1962-67 Chevrolet Nova front subframe kits are one of the most beneficial upgrades available for your first generation Nova. By eliminating the factory strut rods and adding adjustable forward control arms, they add stability, align-ability, improved steering response, and over 2 in. of additional ground clearance. They can accommodate both factory and aftermarket sway bars with up to 1 in. diameters and feature a unique 1-piece crossmember that ties both frame rails together by bolting in where the factory strut rod mounts were located. No cutting or welding required, the installation is all bolt-in. Kits include: * 2 one-piece, 1 1/4 in., 0.120 wall DOM tubular lower control arms with Classic Performance premium ball joints * Bolt-in, 1/4 in. thick steel crossmember * Four alignment cam kits * Grade 8 mounting hardware * Low-friction, long-life bushings * Optional upper control arm bushings
( 15 )
$838.99
Flaming River VDOG variable angle gears have a strong aluminum housing—available in either cast or billet—and the output shaft is 3/4-36 in. for compatibility with universal joints. Each unit is gear driven without any chains or sprockets. It can be mounted in horizontal or vertical positions—ideal for cab-over vehicles, T-Buckets, and specialty builds with big motors and tight firewall clearance. Order the material and finish you prefer. Additional features: * 90 degree gear box with a 35 degree variable angle shaft * Articulating ball design for maximum adjustability * 1:1 ratio to maintain rack and pinion or steering box gear ratio * Award-winning: 2019 SEMA Best Engineered New Product and Best New Street Rod Product
Not Yet Reviewed
$836.99
—
$978.99
UMI Performance bolt-in Viking front coilover kits offer a true 2 1/2 in. racing coilover setup for your ride. UMI's Viking Worrier shocks are double adjustable and easily change from street use to high rebound force for race use. By increasing the rebound force, you can eliminate pitch and roll while making the car stay flat during transitions. Viking Worrier shocks offer a wide range of compression dampening and can be dialed in from a comfortable cruise setting all the way up to full race settings. The kits are available with different spring rates; order the kit designed to fit your vehicle. Additional details: * Viking shocks use upper/lower bearings, eliminating polyurethane and rubber, for crisp response and great reliability * Adjustable compression * Adjustable high rebound Worrier AT valving * CNC laser-cut brackets with black powdercoat finish offer precision fit * Direct bolt-in with no welding, minor trimming required
( 6 )
$764.99
—
$959.99
Designed for the pro-touring GM enthusiasts, QA1 GM 2.0 pro-touring control arms are a simple upgrade over original suspension or worn and outdated tubular control arms. The pro-touring arms are also for those wanting to improve their overall handling, ride quality, and vehicle stance. These arms will improve suspension geometry over the factory configuration and pave the way for planning additional upgrades. The high-strength, low alloy steel enables optimized thinner wall construction and results in overall lighter weight. The increased positive caster design improves straight line stability. Pro-touring arms also feature QA1's stronger, low maintenance, and rebuildable ball joints which feature integrated dust boots. Note: These control arms are not compatible with OE-type springs, a coilover system must be installed. QA1's arms will accept factory type sway bars and include upper and lower bump stops.
( 14 )
$882.95
—
$944.95
Designed for the specific needs of drag racing, QA1 GM 2.0 drag racing control arms are bolt-in upgrades to the original suspension or outdated tubular control arms. Besides improving overall handling, ride quality, and vehicle stance, these arms improve factory suspension geometry and pave the way for planning additional upgrades. The increased positive caster design improves straight line stability. QA1 arms are compatible with OE-style sway bars and come with droop stops on the upper arms with bump stops on the lowers. The droop stops are adjustable to enable the perfect front-end rise for optimized launches. These arms feature ultra-low friction composite bushings for smooth bind-free movement and optimal weight transfer during launch. The high-strength low alloy steel enables a thinner wall construction and results in an overall lightweight package. Note: GM 2.0 drag race arms are not compatible with factory coil springs and must be used with a coilover system.
( 2 )
$776.95
—
$945.95
Are you looking for those hard-to-find leaf springs to finish that intimidating stance on your vehicle? Well, look no further--these Hotchkis Sport Suspension lowering leaf spring kits will not only give you the look of an aggressive drop, but they'll also help you plant and go. These leafs are the perfect additions for G machines or, if you just want a better ride, they work better than stock.
( 63 )
$799.99
PSC double-ended steering cylinders will help drive your rig's performance. Their full-hydraulic offerings include several designs for different applications; some have housings machined with grooves for 4-mount clamps, and some kits include additional clamps. Choose the diameter and stroke size needed for your vehicle—then enjoy your day in the dirt with an assist from PSC double-ended steering cylinders.
( 3 )
$909.97
QA1 MOD Series coilover shocks put the ability to re-valve your shocks—on your car—into the palm of your hand. These innovative shocks feature QuickTune Technology, an industry-first that provides the ability to adapt to any track, any conditions, any time. The technology consists of interchangeable, dry modular valve pack assemblies, that can be thought of as dozens of finely tuned shocks you can hold in the palm of your hand. They define the valving curve of the shocks and can be changed without interrupting the oil pathways. Simply unscrew from the shock, bolt-in another one with a new pre-determined valving range—and you're ready to go. There's no mess, no contamination, no air intrusion, and no downtime waiting on someone to re-valve your shocks. Ideal for Circle Track and Street/Strip applications, the shocks are available in a variety of extended and collapsed length models to best fit your vehicle. Additional benefits and features of QA1 MOD Series shocks: * Design delivers force, control, and unmatched tenability * Hard anodized aluminum bodies with PTFE—durable, non-galling surface * Double-adjustable shocks with low-speed bleed adjustments * Large solid piston (with blow-off valve)—improved driver feel and control with up to 1,600 lb. force * High-speed valving adjustment (coarse adjustment)—relates to shock operation during impact events, like hitting a pothole or curb * 24 clicks/settings—wider range of adjustment than comparable shocks * Indexable base eyelet—multiple mounting position to optimize knob access and provide more mounting flexibility * Low-speed valving (fine-tune adjustments)—adjusts ride quality and weight transfer on corner entry/exit; more bleed for softer feel and less bleed for stiffer feel * Piggyback or remote canister options * Unique spring adjuster nut and tool * Thrust bearings included * Superior thermal performance, as oil is in constant contact with outer body * One base shock can be upgraded over time to keep up with increased performance levels of your vehicle
( 1 )
$787.99
—
$919.95
UMI Performance Road Race K-Members are designed for serious racers who expose their vehicles to more stress than any street cars will ever experience. Using an additional 1.000 in. of tubing, UMI Performance Road Race K-Members tie together crucial areas. They weigh in at 3 lbs., more than UMI's standard version, but still maintain a much-needed weight savings.
( 3 )
$819.99
—
$999.99
ReadyLift Suspension leveling kits are the fastest, safest, and least expensive way to level your truck or make room for oversized wheels and tires as large as 37 in. on most full size trucks (varies by vehicle). Regardless of your suspension, get up to 3 in. of lift without a major hassle or sacrificing ride quality and comfort. ReadyLift thoroughly tests each kit to ensure that your truck will be leveled without overloading or adding excessive strain to any of your factory suspension components. Additional features of ReadyLift Suspension leveling kits: * Custom-designed for your specific year, make, and model * Ideal for eliminating sag caused by a winch, heavy bumper, or plow * Most kits cost 1/3 less than their competition. * Fast, simple installation takes about 1/3 the time of other kits * Steel kits have a durable powdercoated finish * Aluminum kits are corrosion-resistant * Coil spring spacers, expertly indexed forged torsion key spacers, and steel tower extensions are available * Custom, progressive-wound coil springs are offered for specific applications * Torsion keys have up to a 100 rating on the Rockwell(B) index scale, 25 percent stronger than most OEM torsion keys * All mounting hardware is included Note: A wheel alignment is recommended after installation of your new ReadyLift leveling kit.
( 29 )
$799.95
—
$1,099.95
Helix offers rear 4-bar and coilover shock conversion kits for a wide range of applications—including many Buick, Chevrolet, Oldsmobile, and Pontiac cars and trucks from the 1960s and '70s. These suspension kits are a precision balance of ride comfort and maximum road adhesion. You'll immediately feel the difference with Helix coilovers with reduced body roll on corners, nose drive, and squat when accelerating. The springs are manufactured from the highest quality spring steel, using state-of-the-art equipment and the latest technology available. The coilover springs are available in different spring rates. Improve performance without compromising consistency and durability. Order the kid recommended for your vehicle. Additional details: * Style: 4 bar and coilover shock kit * Valving: Performance street * Finish: Black * Upper coil style: Pigtail * Adjustable: Uppers – Yes; lowers – no * Material: Heavy-duty Hardened Steel * Shock finish: Polished * Shock color: Silver * Charged: Nitrogen * Upper mounting: Spike * Lower mount: Stud Plate * Style: Triangulated * Bushings: Polyurethane * Installation: Bolt-on * Tubing: 2x3 lowers and 1.5 in. uppers * Hardware: Included * Instructions: Included
Not Yet Reviewed
$995.95
Bilstein B8 8100 Series bypass shocks are direct-fit, position-sensitive dampers for light trucks and SUVs. These motorsports-inspired shock absorbers utilize a dual tube externally adjustable bypass design. They feature "incremental flow" bypass adjusters, allowing for finite and incremental changes for rebound and compression. Bilstein B8 8100 bypass shocks will maximize your driver experience, offering unparalleled ride comfort and incredible bottom-out control. Many sizes and options are available; order the shocks recommended for your vehicle. Additional details: * Shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle * Remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for easy fitment * Zinc plated finish * Non-coilover 60mm body diameter
Not Yet Reviewed
$784.00
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$899.99
Eibach Pro-Truck systems are the perfect choice for enthusiasts who want the ultimate in a performance lowered truck or SUV. The front springs are engineered to provide enhanced handling, a lower center of gravity, and a simply great look—all without the retaining straps used by some competitors. Rear kits contain everything you need to lower your truck's ride height and achieve ultimate visual and dynamic balance. The front and rear elements are carefully balanced to work together, delivering a crisp, modern look, and the smooth ride and responsive handling that Eibach is known for. Order the kit designed for your vehicle application. Additional features include: * Ultimate on-road handling * Low, lean look * Complements large-diameter wheels and tires * Flatter cornering * Increased rollover resistance * Enhanced stability and response * Excellent ride quality
( 10 )
$781.00
—
$1,046.00
Front and rear Fox 2.5 Performance Series shocks are available for a variety of applications—including many Chevrolet, GMC, Jeep, Ford, and Ram trucks from 2015 and up. Featuring Dual Speed Compression (DSC) reservoir adjusters, these gas-charged shocks are a race-winning technology upgrade to improve damping in any terrain. Models are available to fit zero (stock) to 6 in. suspension lifted vehicles. Before any Fox shocks reach production, they've had to stand the test of time and live up to incredible abuse by the fastest athletes in racing. Fox pushes the boundaries to give you that same precise control and race-proven performance you can feel in a bolt-on solution. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency. Additional features: * 2.5 in. impact extruded and CNC-machined 6061-T6 aluminum body resists rust over time * Hard-anodized for a durable finish * Black-anodized, CNC-machined 6061-T6 billet aluminum * 7/8 in. hard-chrome plated steel shafts * Application-specific valving to maximize performance
Not Yet Reviewed
$999.95
Clearance
Your sport or recreational ATV will be lighter and faster when you install Float 3 Evol R shocks from Fox Racing. The super-lightweight and easily adjustable air shocks are further enhanced with the extra volume (EVOL) air chamber, which regulates spring rate in the final portion of the stroke and controls the bottom-out characteristics of the shocks. Decreasing air pressure will provide a more linear curve to maximize usable travel. The adjustable dual rate air spring and externally adjustable rebound allow the rider to quickly and easily tune for any terrain, condition, or personal preference. Additional features: * Samurai Sealing System (SSS) * Kashima Coat * Aerospace-grade PTFE-lined spherical bearings * EVOL air technology * High-flow velocity-sensitive damping * Chrome silicone negative spring * Fully rebuildable and serviceable * Lose up to 6 lbs. on your ATV (when replacing coil spring shocks)
Not Yet Reviewed
$1,249.95
$939.50
ReadyAir Suspension Performance Load Leveling Helper Spring Kits Powered by LOGIQ brings this 70-year-old market into the 21st century with the latest LOGIQ air spring technology that provides the ultimate blend of ride quality and load stability, in a 100 percent factory-assembled and ready-to-install package. These helper spring kits are available for a variety of applications; order the kit recommended for your vehicle. Additional details: * Faster installation; no drilling required. Simple "clamp around" bracket designs, combined with 100 percent pre-assembly, cuts installation time in half! * Precision fitment: Built-in features that locate off the factory frame and leaf spring locations guarantee proper fitment, geometry, and operation for every install * Properly scaled to match the size of your truck: Rather than using the archaic "one-size-fits-all" approach, ReadyAir properly scales the air spring size and quantity to truly maximize your specific truck's towing and hauling capability * Improved ride quality, stability and load support: Competitor double-bellow style air springs have a natural frequency of 2.5Hz (close to race car stiffness). LOGIQ Air Springs have a 1.6Hz natural frequency to ensure that you'll feel the difference * More suspension travel: Competitors limit the factory travel and typically eliminate the OE bump stops. ReadyAir kits have improved suspension travel and retain the factory bump stops for optimal suspension performance * Some parts are compatible with fifth wheel hitches. For details on confirmed fifth wheel fitment, see the "special attention" section on the product description page.
( 1 )
$799.95
—
$999.95
One of the most effective ways to improve the stiffness and handling of your vehicle is to box the factory chassis. Hellwig Frame FX kits makes it easy for you. Rather than taking considerable time with measuring, cutting, and fitting steel panels these kits simplify the process effectively. Some vehicles have an open C-channel chassis that's only 3 in. wide at the top and bottom. This design is inherently weak in handling torsion and marginal in bending. Frame FX kits double the width of the tension side of the frame rail and close the area for dramatic increases in torsional and bending stiffness. They're comprised of 14 pre-cut 10-gauge steel panels matching the thickness of the factory frame--and fit into the weak points of the factory chassis. Hellwig engineered another panel that adds an extra mount to tie the floor to the chassis, furnishing even more strength to the entire car. In addition, brackets are provided to mount the transmission crossmember, with enough adjustment to accommodate nearly any drivetrain configuration. The increased strength via Hellwig Frame FX kits results in improved handling and ride quality, while retaining the factory chassis and mounting points.
( 20 )
$784.99
UMI's 2nd Generation F-body lower A-arms are perfect for the F-body enthusiast seeking to improve the performance and appearance of their front suspension. They feature caster relocation of the ball joint to enhance steering feel and improve high-speed stability. UMI Performance 1970-81 GM F-body front lower A-arm kits are built with heavy-duty spring buckets, premium ball joints, laser-cut reinforcement plates, double-shear sway bar end links, and either polyurethane or Delrin® bushings. Available with a red or black powdercoating, choose the color and bushings preferred. Additional features: * Ball joint relocation increases caster by 2 degrees for enhanced performance * 1.500 in. DOM steel tubing construction * Heavy-duty spring bucket accepts factory and aftermarket coil springs * Spring bucket is compatible with popular hybrid coils, such as Viking and QA1 * Laser-cut UMI reinforcement plates add a great appearance and excellent strength * High-quality greaseable polyurethane bushings and bump stops provide a crisp yet comfortable ride * Delrin® bushings enhance steering precision and reduce friction for all racing applications * Double shear, swivel-style sway bar mounts and hardware work with UMI's front sway bar and most other factory eyelet-style sway bars
Not Yet Reviewed
$789.99
All-Pro Expedition 2.0 rear leaf springs are developed as an all-around off-road suspension option with long-term expedition capabilities. Expedition-oriented products are a growing segment of the Toyota aftermarket. From rock crawlers to pre-runners, All-Pro Off-Road has always been at the forefront of development for Toyotas. So, the expedition products are a natural addition to its product line. A higher leaf count spring allows the use of thinner leaf material that yields a more flexible and progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle. Expedition leaf springs are designed to carry up to 1,000 lbs. consistently. Expedition 2.0 leaf spring specifications: * Number of leaves 9+1 Overload/Rebound * Eyelet-to-eyelet length (free): 54 3/8 in. (1381mm) * Spring rate: 248 lbs./in.
Not Yet Reviewed
$979.99
BDS Suspension offers traction bars for a variety of applications, including many Chevy, GMC, Dodge, Ram, Ford, and Toyota vehicles from 1988 and up. Improve traction without limiting wheel travel with these kits, made with heavy-wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They feature full float design for bind-free performance and can be installed with a range of lift heights. Additional details: * Fabricated from 2 in. O.D. x 3/16 in. wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame * Axle mount uses BDS's ultra-durable large-forged flex end and jam nut * Using a forged housing with large 1 1/4 in. x 12 threaded shank, a single-sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction * At the frame end, the bar uses a durometer-specific polyurethane bushing and free floats in the traction bar, utilizing a pair of dual-stage internal compression springs and UHMW polyurethane bearings * Adjustable axle wrap control using dual-stage resistance springs * Full floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation * Spring preload can be adjusted on the vehicle without disassembling the traction bar * Traction bar ends are greaseable and rebuildable * Mounting brackets are bolt-on, only requiring minor drilling for frame mount installation
( 1 )
$904.90
—
$969.90
UMI Performance adjustable upper and lower control arms include tubular single adjustable lower and on-car adjustable upper control arms. These control arms are direct replacements for the OEM setup. They add strength, ride improvement, and most importantly, rear-end adjustment. Additional features include: * 1.500 in. x 0.120 in. mild steel tubing * TIG-welded 4140 chromoly tube adapters * Complete arm features TIG-welded construction * Polyurethane greasable bushings * Durable, long-lasting powdercoated finish * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end
( 18 )
$869.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
