Availability
VIAIR's Continuous Duty onboard air systems are a compressed air solution for inflating off-road tires (up to 37 in.), as well as powering up a variety of pneumatic applications. These systems feature one of the most popular "C" model compressors, the 485C Gen II. The upgraded duty cycle of 100 percent at 200 psi and the larger head port size of 3/8 in. NPT allow for faster fill rates, along with increased airflow to your applications. With the VIAIR Continuous Duty onboard air system, you can easily air up off-road tires and other power pneumatic applications like air horns, air lockers, load leveling and more! Air systems feature: * 485C Stealth black air compressor * 2.5 gallon air tank * 30 ft. coil hose * Digital tire inflation gun with 180 psi gauge * 1/4 in. NPT female thread quick-connect stud * 1/4 in. NPT male thread quick-connect coupler * Dash panel gauge with on/off switch * Pressure switch with relay * 1/8 in. NPT female thread to 1/4 in. NPT male thread reducer * 1/4 in. NPT 250 psi safety valve * 1/4 in. NPT drain valve * 1/4 in. NPT compression fittings * 20 ft. of 12-gauge wire with an inline fuse holder * Electrical connectors * IP67 ingress protection rating
( 3 )
$580.81
—
$720.95
Instant Rebate
Maxtrac Suspension lift spindles are a cost-effective way to lift your rear wheel drive truck without breaking the budget. They are designed by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. Some spindles come with extended, DOT compliant, stainless steel braided brake lines. Order the lift spindle suited to fit your application. Features and benefits include: * Maintains factory ride quality * Includes all necessary hardware * Easy bolt-on installation * Available for several applications
( 2 )
$570.62
—
$674.29
Air Lift air compressors are designed for use with their Load Controller II systems. If you're looking for replacement compressors for your system, they provide the power that you need to inflate your air lines.
Not Yet Reviewed
$514.99
VIAIR 450C Series air compressors feature an oil-less design, a high performance PTFE piston gear, and a gearless direct-drive motor. They are moisture and dust-resistant with an anodized aluminum alloy cylinder. These compressors also feature an automatic-reset thermal overload protector, mounting plates with vibration isolators, and stainless steel braided leader hose. The inlet filter is remote mountable and they also have an inline check valve.
( 2 )
$516.95
Kleinn heavy-duty onboard air systems are offered in both 12 V and 24 V versions. They can power your air horns and other accessories, as well as air bags and small air tools. These systems include a 3-gallon air tank, 150 psi compressor, and a quick-connect tire inflation kit. The compressors are sealed against the elements and the steel tanks are internally coated with Cortec and epoxy coated on the outside for lasting corrosion resistance that works as good as it looks. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order Kleinn heavy-duty onboard air systems. More product features, items, and specifications include: * Compressor with 100 percent duty cycle and check valves (6350RC; 150 psi) * Permanent magnetic motor on 24 V system * Maximum pressure – 150 psi * Rating for cfm at 0 psi – 1.17 (6350) and 1.98 (6354) * Amp draw – 21 (6350) and 12 (6354) * Thermal protection * Black epoxy steel air tank (3-gallon; 21 in. long x 8 in. wide x 10 in. tall) * Pressure switch settings - 110/145 psi (on/off) * Safety valve - 175 psi * Drain cock (1/4 in.-NPT) * Compression fitting (1/4 in. NPT) * Intake "Snorkel System" with remote-mount filter * Mounting brackets and hardware * Quick-connect tire inflation kit with 30 ft. coil hose, tire chuck, and storage case
Not Yet Reviewed
$529.95
Skyjacker suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They'll help you get the right height, clearance, and attitude for your truck or Jeep—while maintaining a "factory" ride quality and improving handling. Standard Flex, Value Flex, Rock Ready, Single Flex, and Double Flex versions are available, depending on your application. The lift kits come with all of the necessary mounting hardware and detailed instructions, and they're available for 2WD or 4WD vehicles.
( 69 )
$581.20
—
$740.68
Lares remanufactured steering gears make the perfect replacement for your original equipment needs. These power steering gears are thoroughly cleaned and all exterior surfaces get reconditioned for a fresh like-new appearance. All units receive new OE-equivalent seals and O-rings, then each unit is tested to ensure proper performance. Lares also lubricates each steering gear unit, and applies a fresh coat of high-quality paint, so they come ready to install them and go! Verify the fitment and order the Lares remanufactured steering gear unit designed to fit your application.
( 59 )
$534.99
—
$540.99
If your show car or off-road machine is in need of some high-quality air compressors, then these VIAIR 480C Dual Performance Value Pack air systems are just what you need. These 12 V air systems are designed to fill air tanks with volumes of up to 10 gallons and feature a 165 psi cut-on/200 psi cut-off pressure switch. Available in your choice of pewter or chrome, these VIAIR 480C Dual Performance Value Pack air systems are sure to keep up with your vehicle's air needs--on or off-road. Air systems include: * Two 480C compressors * 2 air filter assemblies * 2 remote mount brackets * 4 remote mount fittings * 4 spare air filter elements * 2 leader hose clips * 6 air line clips * Hardware kit with nuts, bolts, and lockwashers * 2 heavy-duty 40 amp relays * Heavy-duty tube-style fuse holder * Heavy-duty pressure switch
( 3 )
$502.80
—
$522.50
The VIAIR Pathfinder Constant Duty Onboard Air Systems operate at 200 psi from a 1.5 gallon tank and are powered by a 380C stealth black compressor—making for fast inflation rates for most Class B tires from 70 to 80 psi in under two minutes. This pre-packaged air solution comes with all necessary components needed to install a working system, useful for multiple pneumatic applications such as air tools, air lockers, blowing and cleaning tasks, inflating recreational equipment, air horns and many others. Features: * 380C VIAIR compressor with Thermal Overload Protector * 1.5-gallon VIAIR air tank (200 psi) * Illuminated dash panel gauge kit (black face, 200 psi) * Pressure switch (165 psi on, 200 psi off) * 40-amp 4-prong relay * Mini ANL fuse holder with 40-amp fuse * Mechanical tire inflation gun with 160 psi gauge * Two 30 ft. inside braided black coil hose with quick-connect and stud * 90-degree twist-on 40 in. chuck air hose * 45-Degree Dually Extended Reach Chuck * Rubber-tipped blow gun * Air source relocation kit * 1/4 in. (M) to 1/4 in. (M) NPT reducer * 1/4 in. (M) to 1/8 in. (F) NPT reducer * 5-piece tank port fittings kit for 200 psi rated systems * VIAIR storage bag Specifications: * Permanent magnetic motor * 12 V * Duty Cycle: 100 percent @ 100 psi (55 percent@ 200 psi) * Max Working Pressure: 200 psi * Max 12 V Amp Draw: 23 amps * Ingress Protection Rating: IP67
Not Yet Reviewed
$683.50
The VIAIR Base Camp Heavy-Duty Onboard Air Systems operate at 150 psi from a 2-gallon tank and are powered by a 400C chrome compressor—making for fast inflation rates for most Class C RV Tires from 70 to 80 psi in approximately one minute. This pre-packaged air solution comes with all necessary components needed to install a working system, useful for multiple pneumatic applications such as air tools, air lockers, blowing and cleaning tasks, inflating recreational equipment, air horns and many others. Features: * 400C VIAIR compressor with Thermal Overload Protector * 2-gallon VIAIR air tank (150 psi) * Illuminated dash panel gauge kit, black (150 psi) * 40-amp sealed 4-prong relay with pre-wired Female socket * Sealed pressure switch (110 psi on, 145 psi off) * Mini ANL Fuse holder with 40-Amp Fuse * Digital RV tire inflation gun with 180 psi gauge * Two 30 ft. inside braided black coil hose with quick-connect and stud * 90-degree twist-on 40 in. chuck air hose * 45-degree Dually extended-reach chuck * Rubber-tipped blow gun * Air source relocation kit * 1/4 in. (M) to 1/4 in. (M) NPT reducer * 5-piece tank port fittings kit (for 150 psi rated systems) * VIAIR storage bag Specifications: * 12 V * Permanent magnetic motor * Duty Cycle: 33 percent @ 100 psi * Max Working Pressure: 150 psi * Max 12 V Amp Draw: 30-Amps * Ingress Protection Rating: IP67
Not Yet Reviewed
$722.95
Strange Engineering Ultra Series coilover racing shocks are specifically designed for Drag Racing use. These lightweight racing shocks feature a piggyback or in-line reservoir to reduce oil shear and improve small amplitude frequency response. The shocks' gas-charged monotube design with internal reservoir features a floating piston, which will compensate for oil displaced as the shock is compressed. In addition, these shocks can be operated in an inverted position, and will provide consistent chassis reaction. Strange Engineering brings advanced shock technology into the Drag Racing market to provide racers with top-notch performance. Ultra Series coilover shocks features: * 24 adjustments for compression and rebound with piston based valving system * Ultra-low friction guide and seal that maximizes performance consistency * Super finished chrome rod that lowers inertia * 48mm hardened piston with PTFE coating * Piggyback reservoir that can be converted to air adjustable * Locking anodized spring seat is coated for corrosion and galling resistance
Not Yet Reviewed
$694.99
Air Lift WirelessONE 2nd generation control systems put the power in your hands—literally! And the redesigned systems are easier than ever to install! Systems are available with or without EZ Mount installation brackets. Inflate or deflate your air spring system with one touch of Air Lift WirelessONE 2nd generation control systems. NEW!: Air Lift is now offering the same trusted WirelessAIR kit to customers without a hand-held controller. The 73000EZ system utilizes a free smartphone app for wireless control. This new option will allow you to order and receive WirelessAIR kits with all the same functionality and less wait time. Air Lift WirelessONE 2nd generation control systems feature: * Single-path control: Left and right air springs are inflated/deflated equally * Wireless hand-held unit and new mobile app for convenient operation inside or outside your vehicle. Kits are also available without a hand-held controller—utilizing a free smartphone app instead for wireless control * Easy installation—no air lines to the cab * Three programmable, user-defined memory settings
( 28 )
$525.95
—
$675.95
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$659.95
The 1967-69 F-body was designed in an era when high performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-on subframe connectors offer a simple and effective solution to this common issue. They tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance—especially during cornering, acceleration, and braking. The tubular design connects the front Camaro/Firebird subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Additional details: * Included solid body mounts and hardware further reduce chassis flex. Their aluminum construction offers a noise-free alternative to polyurethane. * Thoughtful design: The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. * Easy bolt-in installation makes the upgrade hassle-free. * Fitment notes: Does not fit convertibles.
( 1 )
$535.95
—
$629.95
Designed for the pro-touring GM enthusiasts, QA1 GM 2.0 pro-touring control arms are a simple upgrade over original suspension or worn and outdated tubular control arms. The pro-touring arms are also for those wanting to improve their overall handling, ride quality, and vehicle stance. These arms will improve suspension geometry over the factory configuration and pave the way for planning additional upgrades. The high-strength, low alloy steel enables optimized thinner wall construction and results in overall lighter weight. The increased positive caster design improves straight line stability. Pro-touring arms also feature QA1's stronger, low maintenance, and rebuildable ball joints which feature integrated dust boots. Note: These control arms are not compatible with OE-type springs, a coilover system must be installed. QA1's arms will accept factory type sway bars and include upper and lower bump stops.
( 16 )
$738.00
—
$739.95
AFCO Racing Big Gun drag shocks put your power to the track. Specifically designed for big cubic inch, high-power engines, these twin-tube lightweight aluminum Big Gun shocks provide ultimate control off the line. They feature a new internal design, a low-friction rod guide, and a black, hard coated shaft for low-friction operation. Plus, they're double-adjustable, so you can independently adjust the rebound and compression with no bleed-over. Mount the shocks upside-down for easier access to the rebound adjuster. And their shim stack design makes them owner-rebuildable, revalveable, and serviceable. Add the ultimate shocks for superior launch control and performance--pull out the Big Guns from AFCO.
( 5 )
$539.99
—
$549.99
RideTech has upgraded the traditional notion of sway bars with their MuscleBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MusceBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions
( 24 )
$525.00
—
$595.00
Air Lift LoadLifter 5000 Ultimate air spring kits feature an internal jounce bumper for maximum ride comfort. They use 2-ply reinforced commercial-grade bellows, which mount between the spring and frame and can be inflated from 5 to 100 psi—to level loads up to 5,000 lbs. on large pickups and vans, wreckers, ambulances, motorhomes, and commercial trucks. LoadLifter 5000 Ultimate kits include bellows, jounce bumpers, air lines, fittings, brackets, mounting hardware, and instructions. They're engineered for installation in about two hours. Order the kit designed for your make and model vehicle.
( 158 )
$502.99
—
$646.99
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1971-87 Chevy/GMC truck lower control arms come with rubber bushings, cross shafts, and ball joints pre-installed. They are manufactured from steel and powdercoated black for a stock appearance. Restore your classic's suspension with OER Authorized control arms.
( 1 )
$540.99
Hotchkis Sport Suspension weld-on subframe connectors strengthen the chassis of your unibody to increase cornering and straight line performance. They're engineered to provide maximum ground clearance, while reducing annoying rattles and squeaks.
( 51 )
$521.10
—
$719.99
Upgrade from stamped steel and rubber bushings with QA1 tubular control arms. Stronger and lighter, they are constructed of tubular steel, powdercoated, and fitted with polyurethane bushings. Their upper control arms will increase caster by approximately 3 degrees for better straight line stability and include ball joints. The lower control arms feature sway bar tabs and include bushings, pivot arms, and nuts for a no-hassle install. Improve the performance of your muscle car with QA1 tubular control arms.
( 1 )
$549.95
—
$609.95
Summit Racing™ coilover shock and spring Pro Packs help you replace your OEM rear suspension and enable your race car to be more consistent on starting line launches. These kits include a pair of adjustable coilover shocks and a pair of silver powdercoated coilover springs. They're available with a variety of spring rates that you can match to the specific rear weight of your vehicle. Stop wasting precious time on the starting line—order the Pro Pack with performance options best suited for your application.
( 11 )
$525.88
—
$733.86
Say goodbye to leaving the line sideways with UMI's rear drag sway bars. These kits are designed to get your vehicle consistently leaving the line straight, eliminate torque steer, and drastically improve 60 ft. times. The included adjustable end links allow vehicle preload to be set for straight launches. UMI's end links feature heavy-duty chromoly rod ends, which have a hard chrome plating and a PTFE self-lubricating race. The end links attach to the drag bars using 5/8 in. Grade 8 bolts and locknuts. These heavy-duty rear drag bars attach to the axle tubes using high-strength 4140 chromoly U-bolts, 3/16 in. thick fabricated mounts, and Energy Suspension bushings. The fabricated bushing mounts feature CNC-machined teeth to prevent sliding on the axle. Unlike some competitors' designs, UMI's sway bar mounts also feature gussets welded on each end to prevent the brackets from spreading while tightening.
( 5 )
$529.99
On Sale
Stifflers Suspension Mustang FIT (Fully Integrated Technology) systems offer a proven way to keep your Mustang's muscles fit! The FIT system integrates the front and rear subframes and ties them into the rocker panels to form a triangulated web of strength and stiffness that helps keep your car in shape for improved handling, launches, and ride quality. The strong steel stiffeners beef up your Mustang for an increased range of suspension tuning and overall performance. Twisting and bending is good conditioning for humans--not vehicles. The best exercise for your Mustang is Stifflers FIT system. Stifflers Mustang Fit System benefits include: * Transfers more power to the ground, not wasting it twisting and bending the chassis * Launches straighter * Stiffer chassis reduces or eliminates interior rattles and extends the life of the vehicle * Weld locations are free of powdercoat--no removal of powdercoat required before installation * Non-intrusive design; no floors to cut, interior to remove, or lines to relocate * Tube ends are sealed to keep out moisture * Ground clearance remains unchanged * Increases side impact safety * Can be used with factory convertible braces with only slight modifications
( 3 )
$569.95
$512.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
