Availability
Summit Racing™ offers a wide range of replacement steering components, including these power steering hose kits. They contain high- and low-pressure rubber hose, along with fittings to connect power steering pumps to power steering boxes. These parts are manufactured to factory standards to ensure proper fitment and long-lasting performance. Order the kit recommended for your application.
( 1 )
$59.99
Firestone air line service kits are designed for servicing your Ride-Rite, Sport-Rite, and Coil-Rite systems. They feature a coiled length of plastic air line tubing. The kits are available in different lengths and diameters to fit your specific Firestone kit.
( 6 )
$55.30
—
$78.11
AccuAir Suspension offers a variety of air spring replacement parts, including DOT-approved air lines. These air lines are made of high-quality materials and are sold in 50 ft. bulk rolls, so they can be cut to the required length needed to help you make repairs to your air suspension system—saving you money when compared to buying an air line in smaller quantities.
Not Yet Reviewed
$82.95
Are you looking for an easy fix for a leaking air line? Dorman suspension air compressor line repair kits renew suspension function and improve drivability. You can prevent unsafe driving conditions due to a sagging suspension. These easy-to-install, plug-and-play connectors are corrosion-resistant direct replacements for a proper fit every time. These Dorman parts have undergone quality engineering testing to ensure product standard compliance.
Not Yet Reviewed
$53.99
Rein Automotive ABC hydraulic suspension line assemblies offer technicians an OE-quality replacement solution for worn-out originals. These line assemblies ensure proper operation of the Active Body Control system. They're built with OE rubber compound hose and zinc alloy-coated OE carbon steel tubing and end fittings. Joining the hose and tubing sections of the assembly are OE hose crimp ends, brackets, and sealing hardware, all as specified by the manufacturer. The direct-fit line assemblies are leak-tested to over 2,000 psi. Order the model recommended for your vehicle.
Not Yet Reviewed
$87.99
RideTech Delrin®-lined sway bar mount bushings offer a simple way to eliminate rotational friction. Plain rubber or polyurethane mounts can induce as much as 200 lbs. of uncontrolled, unpredictable, and unwanted spring rate spike into your suspension. These Delrin® bushings make an immediate and significant improvement in ride quality and handling performance! RideTech kits include a pair of the steel bushing housings, polyurethane bushings, and Delrin® sleeve inserts.
( 8 )
$85.00
RideTech replacement air line tubing is available in a variety of lengths and diameters, with or without fittings included. The durable black plastic tubing is DOT-approved and is an ideal replacement for your air spring suspension. Order just the tubing or an entire kit designed to fit your application.
( 12 )
$75.00
For economical traditional metric spherical bearings, QA1 MCOM-T PTFE lined spherical bearings are the perfect choice. The ball is manufactured from 52100 bearing steel, heat treated, precision ground, and hard chrome plated. The bearings feature a self-lubricating PTFE liner and the outer race is made from heat-treated, chromoly steel that has been protective coated for corrosion resistance.
Not Yet Reviewed
$50.99
Classic Performance ECONO Line spindles will work with original disc brakes, as well as Classic's popular Big Brake Kits. They are great replacements and allow the use of stock steering arms and the factory single piston disc brakes.
Not Yet Reviewed
$96.99
Gabriel air shock fill hose kits let you mount valves in a convenient place for pumping up those air shocks. There might just be a little more bounce in your step when you're finally able to add air and lift to your shock absorbers with ease! Kits include: * Four tube nuts * Four tube clamps * Ten packing O-rings * Tube * Tee block with air valve fitting * Valve core * Washer * Two hex nuts * Seal
( 39 )
$61.99
QA1 HCOM-T Large Bore series spherical bearings are great solutions for your special applications! These spherical bearings feature self-lubricating PTFE liners for smooth operation, and each bearing is made from heat-treated chromoly steel and coated for corrosion resistance. The bearing balls of these QA1 HCOM-T Large Bore series are hard chrome plated and precision-ground. Choose bore sizes from 1 in. to 2 in. to fit your large applications. QA1 HCOM-T Large Bore series spherical bearings offer the quality and affordability that make your project #1!
( 2 )
$52.99
—
$81.99
FK JM Series rod ends feature a heat-treated, zinc plated, and chromate treated alloy steel body. Their ball is made of 52100 steel and is heat-treated and hard chrome plated for durability. JM Series rod ends have heat-treated steel alloy races, which are zinc plated and chromate treated to resist oxidation. These 3-piece, wear-resistant rod ends are precision-made and are offered in metal-to-metal or PTFE-lined styles. Order the size, thread, load capacity and other options available for your application.
( 7 )
$51.99
—
$84.99
Artec Industries JMX Series rod ends are an ideal way to add strength, reliability, and flexibility to any situation requiring use of a rod end, such as suspension or steering applications. The JMX Series rod ends utilize a high-strength, heat-treated 4130 chromoly body with silver zinc finish and a PTFE liner for smooth operation. Artec Industries premium 3-piece JMX rod ends remain quiet and tight for years of usability. More features: * Ball is made from heat-treated bearing steel for strength and hard-chrome polished for a smooth surface * Race is a heat-treated alloy steel helping the joint outlast normal budget rod ends with an injection molded race
Not Yet Reviewed
$72.59
QA1 G Series rod ends feature 300 Series stainless steel bodies, a 440C stainless steel ball, and are PTFE-lined. The 2-piece, corrosion-resistant, self-lubricating rod ends offer lasting good looks and reliable performance. They are available in metric (MG) and inch (G) sizing, and in both right and left hand thread sizes. QA1 G Series rod ends are ideal for low-load applications, such as alternator brackets, shifter rods, lift arm braces, throttle and clutch linkages, and more.
( 25 )
$53.99
—
$92.99
QA1 MG Series rod ends are stainless steel metric solutions for low-to-moderate loads. They feature a traditional 2-piece design with self-lubricating PTFE liner, 300 Series stainless steel bodies, and 440c stainless steel, heat-treated and precision ground balls. Ideal for corrosive environments, these metric rod ends are available with right- or left-hand threads with or without stainless steel stud. Select the size and configuration needed for your project.
Not Yet Reviewed
$55.99
—
$68.99
Air Lift offers replacement hoses for more than a hundred air spring kit applications. The hoses are available in many different sizes, lengths and variations—and the kits include varied components. Please refer to the description of each part for details.
( 31 )
$58.99
—
$89.99
Summit Bucks
ACDelco specialty shocks and struts are available to fit many GM sport utility and performance vehicles on the road today. They're built to handle demanding applications, like towing and temporary loads. ACDelco offer heavy-duty replacement options, as well as spring-assisted shocks. Many feature super-finished, chromed piston rods that provide anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life. Get great ride and handling for your sport utility or performance vehicle with ACDelco specialty shocks and struts.
( 24 )
$50.99
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 242 )
$80.99
—
$97.99
Summit Racing™ traction bars will reduce wheel hop at launch so that you can get off the line quicker, and they look good doing it, too! They're constructed of heavy-gauge rectangular steel tubing and MIG-welded brackets for additional strength. Everything you need to install them is included for quick, painless installation.
( 171 )
$66.99
—
$68.99
On Sale
Koni STR.T Street shocks and struts are designed to replace your factory shocks and struts, as well as complement your vehicle with performance lowering springs and sway bars. These non-adjustable shocks and struts feature a twin-tube design and larger-diameter piston for optimum street driving. Get a better hold on the road, plus damping action for a more stable ride—with suspension parts from the Koni STR.T Street line. Order the STR.T Street shock and strut model designated to fit your application.
( 168 )
$78.22
—
$105.74
$73.53
—
$99.40
From one to nine, it's your ride your way with Rancho RS9000XL shock absorbers and struts! Rancho offers an exclusive nine levels of performance for your stock or lifted off-road rig. Extra-large bodies with a liquid metallic finish, nitrogen gas-charged, large Nitro Carb rod, polyurethane bushings, and protective boots create this line of advanced RS9000XLs. Together with Rancho technology, these upgrade/replacements deliver optimized performance, looks, and durability. Tune your vehicle for the best obtainable smooth road ride, off-road performance, towing or hauling capabilities—it's all about you with Rancho RS9000XL shocks. Select the model designed to fit your application.
( 133 )
$71.50
—
$99.99
Moog offers these quality replacement pitman arms for many applications. They're built to factory specs, so you can be assured that you're getting a quality product that will help to keep your vehicle's steering as smooth as it was when it rolled off of the assembly line.
( 137 )
$50.99
—
$94.99
By installing a taller set of RideTech ball joints, you reposition the control arms to dramatically improve the OEM camber curve and give your car a much more stable feel through the corners. Why taller ball joints? OEM muscle car front suspension geometry usually creates positive camber when cornering. This means that the loaded tire leans away from the turn--a huge compromise in cornering performance and feel. Ridetech ball joints help optimize handling with real-world street tires that will see thousands of highway and backroad miles. They are direct replacements for OEM ball joints and are easy to install--no cutting, welding, or fabrication is required, as well as no modifications to the fuel lines, brake lines, or exhaust.
( 15 )
$60.00
URO Parts shock mounts are part of their line of suspension components that help keep the luxury and performance in driving a European vehicle. The sales volume of URO Parts creates manufacturing efficiencies that save you money. Every URO manufacturing facility is ISO 9000 certified, and all URO shock absorber mounts undergo intensive testing and inspection to make certain that each part meets or exceeds OEM standards for fit, function, durability, and design.
( 2 )
$87.99
—
$90.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
