Availability
Showing In Stock Items. Show All 13 Items.
On Sale
Fully assembled and bench-tested ARB on-board high performance air compressors install into your vehicle and include a full, snap-together, fuse-protected wiring loom with solenoid plug-in contacts, mounting hardware with reinforcing bracket, and an OEM-quality compressor isolating switch. With the addition of an ARB-171302 pump-up kit (sold separately), they can be used to activate ARB Air Lockers, and perform other functions such as inflating camping gear. So what makes these compressors special? They're small enough to fit into even the tightest space and quiet enough to mount in the cab. They have enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes. And, they work. ARB has tested these units in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and they continue to perform. Features of ARB on-board high performance air compressors include: * Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply * Fully sealed components for moisture and dust protection * Over-pressure safety valve-equipped * Pressure switch-controlled air manifold system specially designed for ARB Air Lockers * Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life * Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing * Motor is internally thermal-protected against extreme temperature damage * Comprehensive-photo illustrated installation guide * Range of accessories available
( 9 )
$359.95
—
$551.70
$323.96
—
$496.53
On Sale
These panhard bars are made up of Grade 12.9 hardware and high-strength 4130 chromoly alloy steel. Panhard bars are weld-in units that will allow you to adjust your rear roll center with ease and eliminate all of the deflection associated with the factory panhard rod. Adjusting the roll center will allow you to dial the handling balance of the vehicle by helping to control under and oversteering.
( 2 )
$279.95
$251.99
On Sale
Steeda billet shock mounts replace your weak cast factory units. Unlike the factory mounts with rubber bushings, Steeda mounts are machined from 6061 billet aluminum and feature stainless steel spherical PTFE-lined bearings for optimum performance and control. They're available for a variety of Ford Mustang applications from 2015 and up.
( 2 )
$359.95
$323.99
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$470.95
—
$473.95
$259.95
—
$260.95
On Sale
Steeda Ford Mustang rear chassis X-braces reduce deflection and improve your suspension performance. They're crafted in-house from strong chromoly alloy steel tubing, then further reinforced with a billet aluminum center cover plate. The X-braces are powdercoated to resist the elements and provide long-lasting rigidity to your undercarriage. These units distribute loads more efficiently between your rear shocks, springs and the chassis—providing increased handling and cornering, while curbing rattles and squeaks. Most—but not all—models require a rear seat delete, and you can secure the braces easily with either a bolt-on or welded installation. Order the Steeda rear chassis X-brace designed for fitment on your Ford Mustang submodel.
( 4 )
$284.95
—
$354.95
$256.99
—
$331.99
On Sale
Artec Industries' new JK heavy-duty crossmembers are designed to give your Jeep Wrangler JK better protection beneath the vehicle than the stock unit. Designed using CAD files directly from the manufacturer, these heavy-duty reinforcements ensure that you have a great fit with factory components. Made from CNC-cut and formed 1/4 in. thick steel, the JK heavy-duty crossmembers will hold up to plenty of off-road abuse. They enable you to mount longer arms for greater stability and flex. All nuts are pressed into the brackets for easy removal and installation; the crossmembers use 2.625 in. wide joints or bushings with 9/16 in. holes; they're shipped bare so you can custom finish it however you want. Order the model recommended for your Jeep application.
Not Yet Reviewed
$571.99
$428.99
On Sale
Yukon Gear & Axle ball joints are top-quality, reliable small parts to complete your suspension job. They offer individual lower and upper ball joints, as well as kits with upper and lower to service one side of your vehicle.
( 4 )
$294.99
—
$297.99
$250.74
—
$253.29
On Sale
Old Man Emu Dakar leaf springs are offered in numerous spring options to suit a multitude of applications, allowing you to set your vehicle up for recreational or commercial purposes. Feature packed, a set of Emu Dakar leaf springs matched to a set of Old Man Emu shocks will deliver a vastly improved ride, handling and load carrying capability to your vehicle. Emu Dakar leaf springs typically feature: * Draw-tapered and diamond-cut leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life * Bolt clamps and liners: The leaf clamps are bolted to allow installation of anti-squeak nylon liners * Fully scragged and load-tested: Scragging ensures the spring takes a permanent "set" which reduces the risk of sagging. Load testing ensures the spring meets the required specification. * Graphite coating: To further reduce the friction between the spring leaves and friction pads. * Military wrap: Designed to provide added safety (not available on all applications) * Anti-friction pads: Re-greaseable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest * Flat axle seat area: Allows a positive, safe axle mount reducing spring stress and increasing spring life * Shot peening: The tension side of all leaves is shot peened to reduce spring stress, process can also double the life of a spring * Two-stage leaf pack: Featured on most rear springs for optimum comfort. When unladen, the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added
( 11 )
$319.95
—
$399.95
$287.96
—
$359.96
On Sale
Old Man Emu leaf springs are engineered to provide optimum ride performance irrespective of the operating conditions in which they operate. Numerous spring options are available to suit a multitude of applications, allowing you to set your vehicle up for recreational or commercial purposes. Feature packed, a set of Old Man Emu leaf springs matched to a set of Old Man Emu 4x4 shock absorbers (not included) will deliver vastly improved ride, handling, and load carrying capability. Choose the leaf springs designed for your vehicle.
Not Yet Reviewed
$359.95
$323.96
On Sale
Old Man Emu BP-51 Bypass shocks feature revolutionary, patent pending technology engineered to deliver unparalleled on and off-road performance for your 4x4. Developed and extensively tested under the harshest conditions in Australia, these big bore, position-sensitive bypass shock absorbers with remote reservoir bolt onto your vehicle without any vehicle modifications. They combine considerable ride comfort around town, with significant amounts of end-zone damping for exceptional chassis control and handling off-road. Order the model designed for your vehicle application. Key features of Old Man Emu BP51 Bypass shocks include: * 6061 grade aluminum remote oil canister (for increased oil volume, resulting in lower oil temperatures) * Durable Dash 6 high-temp PTFE hose (incorporates high-flow fittings for optimum oil flow) * Large PTFE-lined spherical bearings * Spring seat (6061 grade aluminum) * High-quality X5K grade steel coil (incorporates application-specific design for use on various coilover models) * Adjustor (for adjustment of spring preload and ride height) * Top hat (6061 grade aluminum) * Rubber bushings (oversized) * Shaft guard (replaceable, impact resistant, high-density polyethylene) to prevent damage to shock absorber shaft * Pinion shaft (hard chromed, for strength and durability) * Adjuster (allows fine-tuning for ride comfort and control to suit varying vehicle and trip requirements) * Shock absorber body (6061 grade aluminum with hardened finish for increased heat dissipation and corrosion resistance) * Piggy back clamp (allows easy connection of remote oil reservoir to main shock absorber body)
Not Yet Reviewed
$599.95
$539.96
On Sale
APR roll-control sway bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade helps to reduce the load differentials between your vehicle's inner and outer wheels during cornering. In doing so, these sway bars improve vehicles under and oversteer balance, thus, giving the vehicle greater stability and control, with increased grip. These roll-control sway bars are offered in either front bar or rear bar applications, but designed for use together. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions. Order the required sway bar application to fit your specific requirements. Additional features: * Sold individually, bars are offered in either front bar or rear bar applications * Front bar application includes bushings, mounting brackets with hardware, and billet spacers * Rear bar application includes poly bushings to further reduce undesirable suspension flex * Strong, steel weldless design * Attractive red powdercoat finish * Larger than stock at 1 in. * Hollow weight-savings design * 2 adjustable pickup points
Not Yet Reviewed
$299.95
$269.95
On Sale
Old Man Emu lift coil springs are available in a range of designs for each vehicle, enabling the installer to match the most appropriate springs to the intended application. While ride height increases are attained, emphasis is placed on ride control improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system designed specifically to suit your vehicle. Combine your fully loaded vehicle with punishing off-road conditions, and the limitations of standard springs soon becomes apparent. Choose Old Man Emu lift coil springs; they won't let you down. Features include: * Springs are formed on precision mandrels * Scragging before and after shot peening to prevent sagging * Constant and variable rate coils available for multiple applications * Coil spring end configurations designed to exact specifications guaranteeing perfect fitment to your vehicle * Durable powdercoat finish
( 30 )
$299.95
—
$399.95
$269.96
—
$359.96
On Sale
ARB designs an extensive range of Old Man Emu coil springs for numerous applications, using state-of-the-art micro-alloyed spring steel to ensure superior resistance to sagging and corrosion. With such a wide selection available, coil springs can be better matched to your specific load requirements and intended vehicle usage.
( 1 )
$299.95
—
$319.95
$269.96
—
$287.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
