Availability
Showing In Stock Items. Show All 16 Items.
UMI Performance transmission mounted torque arms eliminate unwanted traction problems and transfer your power to the wheels. UMI Performance transmission mounted torque arms bolt on directly in place of the factory unit using existing mounting holes and require no drilling or welding. These torque arms are designed to eliminate wheel hop under hard acceleration and reduce 60 ft. times instantly. UMI Performance transmission mounted torque arms are supplied with a low-deflection front bushing designed to replace the stock rubber bushing and bolt in the existing clamshell. The rear torque arm mount is constructed entirely of 0.375 in. thick, CNC-machined mild steel and is fully MIG-welded. These torque arms feature on-car adjustability for easy pinion angle adjustments using a 4140 heat-treated adjuster and 3/4 in. rod ends. Additional features include: * Constructed from 1.250 in. x 0.120 in. DOM seamless steel tubing * TIG-welded 4140 chromoly tube adapters * On-car adjuster built using 4140 chromoly steel and heat-treated for maximum strength * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Rear mounting plates use 0.375 in. thick mild steel and are designed to fit stock as well as 12-bolt and 9 in. rear-end housings * Rear mounts feature solid 3/4 in. rod ends and are attached using Grade 8 hardware * Durable powdercoated finish
( 19 )
$303.98
—
$529.99
UMI Performance tunnel mounted torque arms are a proven fourth-generation setup designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage. They also work great for transmission swaps when a clamshell torque arm is not feasible. These torque arms include instant center adjustment brackets and can be purchased with or without a front driveshaft loop. They bolt into existing floor pan holes with no drilling or welding required.
( 39 )
$329.99
—
$499.99
Are you looking for a torque arm that will stand up to your 10.50 or lower ET? Look no further. BMR Suspension Xtreme torque arms are constructed from TIG-welded 4130 chromoly tubing to take the punishment of that 8, 9, or 10-second motor, BMR torque arms provide less wheel hop for stronger performance. Additional features: * Gusseted rear mounting bracket made from 3/8 in. laser-cut plate * Solid 4130 rod eyes * Reinforced front bushing mount * Additional cross bracing
( 34 )
$329.95
—
$529.95
If you've increased the power level of your 3rd Gen, damaged transmission tail housings can be a common and costly issue. QA1 has designed a solution with their Tunnel mounted torque arms and dedicated transmission crossmember to provide greater strength and peace of mind. This increases traction, reduces wheel hop, and reduces dive during braking. The torque arms are a direct-fit with several popular rear end housings. Additionally, QA1's Tunnel mounted torque arms feature pinion angle adjustability, allowing for precise tuning based on your vehicle's setup. The Tunnel mounted torque arms are available to fit OEM, Strange 12-bolts, and aftermarket 9 in. housings, as well as Strange S60 and Moser 12-bolt housings. Select the QA1 Tunnel mounted torque arms designed for your vehicle's application needs. Features and benefits: * Enhanced strength for high horsepower cars * Relocates mounts off the transmission * The torque arm has been rigorously tested to withstand up to 1,000 lbs.-ft. of torque, making it suitable for high-performance builds * The QA1 torque arm installs cleanly with a new transmission crossmember, fitting snugly in the tunnel without compromising ground clearance or exhaust clearance * It utilizes QA1 X-Series chromoly rod ends for mounting to the differential, ensuring strength * A polyurethane bushing at the front mount reduces noise and vibration while maintaining strength and durability * Pinion angle adjustability * Bolt-in design for easy installation
Not Yet Reviewed
$419.95
These strong, tubular steel torque arms from QA1 feature reinforced mounting points for maximum strength and rigidity. Their polyurethane bushings will reduce wheel hop caused by excessive flex under hard acceleration and cornering. The torque arms are available in your choice of solid or adjustable designs.
( 1 )
$413.96
BMR Suspension tunnel mounted torque arms improve handling, reduce wheel hop, and add strength plus adjustability to your 4th Gen GM F-body. These packages mount the torque arm to the transmission tunnel mount instead of the transmission tail shaft, making them ideal for high-horsepower applications. The tunnel mount design removes the load from the transmission, which can damage the transmission, and puts the heavy loads of high-power cars into the chassis. The torque arm crossmember provides an adjustable mounting plate for the torque arm, while adding strength to the floor by reinforcing the transmission tunnel. Features: * Heavy-duty 1.25 in., 0.120 in. wall DOM steel tubing * Heavy-duty 1/4 in. laser-cut, CNC-formed steel plate * MIG-welded * Five mounting positions for instant center and pinion angle adjustability * Integrated driveshaft safety loop (TA011/TA012) * Increased clearance for long-tube headers/aftermarket exhaust (TA012/TA014) * Mounts to the driveshaft tunnel brace * Uses factory differential mount * CNC-machined, on-car torque arm adjuster for pinion angle * 95-durometer polyurethane front mount * Massive increase in strength over factory torque arm * Available in black hammertone or red powdercoat
( 10 )
$529.95
Complete your restoration project with Scott Drake! Scott Drake manufactures these frame rails from high-quality steel and paints them black to prevent corrosion. Trust in Scott Drake to get your ride back onto the open road.
( 2 )
$349.95
—
$381.95
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$329.95
—
$519.95
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$259.95
—
$449.95
Ford Performance Parts anti-sway bars are designed to reduce body roll and improve overall handling and cornering. They are manufactured from high-quality materials and are custom-fit for your specific vehicle. Ford Performance Parts anti-sway bars tighten up your suspension, offering much-improved handling and cornering performance. Kits include all mounting hardware and are best when used with Ford Performance Parts struts, shocks, and springs. Note: Some factory fasteners are one-time use. Refer to the appropriate Ford service manual for reuse information and correct torque specifications.
( 7 )
$479.99
Get a grip with Rough Country traction bar kits. These heavy-duty components help prevent wheel hop and axle wrap by aligning and stabilizing the rear axle geometry, allowing for full travel and articulation without binding. Once installed, they will prevent the type of movement and pinion angles that cause a loss of traction. Not just any bar can get the job done, which is why this ladder-bar design combines relentless strength with aggressive good looks. Beef up your vehicle's rear-end setup and be ready to face the gauntlet of off-road obstacles ahead of you with the Rough Country traction bars best suited for your application. More product features and items may include: * Durable rubber bushings and threaded adjustable Heim end for an easy installation and true adjustability * Fitment range from stock height up to 7 1/2 in. of lift depending on the kit chosen and application * Ideal for holding traction while towing or during quick acceleration * Laser-etched "RC" logo on mounting plates * Hardware kit with detailed instructions that include a list of components and torque specifications
Not Yet Reviewed
$449.95
—
$499.95
Save time and money with a full All-Pro Off-Road suspension kit. These kits (without shocks) are intended for those who plan on using adjustable coilovers and need to complement them with a rear spring lift and adjustable control arms. Choose between Standard and Expedition leaf springs; optional bump stops are available. Each kit comes with a pair of All-Pro tubular chromoly upper control arms, extended brakes lines, and a U-bolt flip kit. Order the model recommended for your vehicle application. Product details: All-Pro upper control arms: * Tubular chromoly upper A-arms * Arms use 1.25 in. uniballs * New flush-mount hardware and spacers * Uniball spacers are CNC-machined from heat-treated stainless steel * Polyurethane bushings with thick inner sleeves * Includes Grade 8 and high-strength 12 pt. hardware * Gray powdercoat finish * Maximum wheel backspacing: 4.50 in. All-Pro Leaf Pack (choose Standard or Expedition): * A higher number of thinner leafs provides a smoother, progressive spring rate compared to fewer, thicker leaves * Double "military" wrap provides extra strength for the main leaf * "Torque Leaf," an extra half-leaf at the top of the spring pack, increases anti-wrap properties without hindering travel or ride quality * Diamond-cut leaf ends to eliminate stress points which may weaken leafs and lead to premature failure * PTFE anti-friction pads between leafs provide smoother flex, lessen spring wear, and reduce noise * Leafs are shot-peened after forming to relieve stress * Every completed spring pack is pre-cycled to their travel extremity for quality control and to reduce the likelihood of initial sag * Comprehensive 12-month warranty for non-racing applications when properly installed (Note: Using a lifting block or shackle flip with the All-Pro Off-Road springs will void the warranty on the springs.) All-Pro rear U-bolt flip kit: * All-Pro Off-Road U-bolt flip kit turns the U-bolts upside down so the bolt ends face up, away from the rocks. This mod both prevents damage to U-bolt threads and increases ground clearance. The kit comes complete with new heavy-duty U-bolts, plus hardened U-bolt nuts and washers. Tapped plates are also included in every kit. All-Pro rear extended brake lines: * These steel braided brake lines are great for your lifted Toyota. The rear brake lines are 24 in. and designed for stock ride up to a 4 in. lift. U.S. DOT-approved, they exceed all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106.
Not Yet Reviewed
$499.99
Rough Country heavy-duty steering kits provide incredible durability for vehicles that travel unpaved trails. Off-road obstacles such as rocks and logs can wreak havoc on your factory steering components. These handy steering upgrades replace the weaker factory tie-rod and drag link with a massive 1 1/2 in. DOM tube replacement that is ready to withstand off-road torment. Once installed, they provide greater clearance between the tie-rod and differential cover. Beef up your vehicle's steering setup and be ready to face the gauntlet of off-road obstacles ahead of you with the Rough Country heavy-duty steering kit best suited for your application. More product features and items include: * Rotational non-articulating joints to prevent bump steer while providing a tighter steering feel * Tie-rod ends feature easy-access winch flats to aide in installation and adjustments * Hardware kit with detailed instructions that include a list of components and torque specifications
( 1 )
$389.95
On Sale
For safer load carrying, Rough Country air spring modular kits keep your ride level when towing with their durable powdercoated steel mounting brackets and double-convoluted air bags. They can be used on stock height vehicles (the included spacers and related hardware won't be used) as well as lifted models. The air bags feature an internal bump stop and installation is simplified with the push-to-connect air fittings. Versions include those with and those without an onboard air compressor, plus complete kits with a wireless remote system. Transform your vehicle into a legend with an assist from the Rough Country air spring kit best suited for your application. More product features and items include: * Optional onboard air compressor kits and wireless remote systems can be added later * DOT-approved air line * Fittings (90-degree) * (2) Air bags (5-100 psi minimum-maximum) * Inflation valves (manual Schrader) can be hidden inside fuel door or used as license plate hold-downs * U-bolt plates * Block shims * Hardware kit with detailed instructions that include a BOM (Bill of Material) and torque specifications * Some kits will include headlight frame and air bag brackets (application dependent) * This product will not increase any vehicle's towing capacity
Not Yet Reviewed
$297.95
—
$314.95
On Sale
It's a known fact; during acceleration, cornering, and braking your chassis will flex and twist. The more power you add or the stiffer the suspension, the worse it becomes. All this movement uses up valuable horsepower, decreases handling characteristics, and reduces ride quality. So why spend time and money improving your engine and suspension when it's attached to a flaccid frame? Stifflers Suspension F-150 chassis stiffening systems bridge the front and rear sections of the F-150 frame to significantly increase its stiffness and reduce the twisting and bending caused by suspension inputs and drivetrain torque. The systems are designed for ease of installation with minimal drilling--all other mounting locations use existing holes. Stifflers F-150 chassis stiffening systems are complete with integrated brackets for optional driveshaft safety loops (sold separately). So what does this mean for you? * Straighter launches * Less wasted horsepower * More responsive suspension tuning * Improved handling under cornering and braking * Better ride quality * Fewer squeaks and rattles NOTE: Other manufacturers' long bars cannot be used with these systems.
Not Yet Reviewed
$549.95
$494.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
