Availability
Showing In Stock Items. Show All 132 Items.
UMI Performance tunnel mounted torque arms are a proven fourth-generation setup designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage. They also work great for transmission swaps when a clamshell torque arm is not feasible. These torque arms include instant center adjustment brackets and can be purchased with or without a front driveshaft loop. They bolt into existing floor pan holes with no drilling or welding required.
( 39 )
$329.99
—
$499.99
UMI Performance transmission mounted torque arms eliminate unwanted traction problems and transfer your power to the wheels. UMI Performance transmission mounted torque arms bolt on directly in place of the factory unit using existing mounting holes and require no drilling or welding. These torque arms are designed to eliminate wheel hop under hard acceleration and reduce 60 ft. times instantly. UMI Performance transmission mounted torque arms are supplied with a low-deflection front bushing designed to replace the stock rubber bushing and bolt in the existing clamshell. The rear torque arm mount is constructed entirely of 0.375 in. thick, CNC-machined mild steel and is fully MIG-welded. These torque arms feature on-car adjustability for easy pinion angle adjustments using a 4140 heat-treated adjuster and 3/4 in. rod ends. Additional features include: * Constructed from 1.250 in. x 0.120 in. DOM seamless steel tubing * TIG-welded 4140 chromoly tube adapters * On-car adjuster built using 4140 chromoly steel and heat-treated for maximum strength * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Rear mounting plates use 0.375 in. thick mild steel and are designed to fit stock as well as 12-bolt and 9 in. rear-end housings * Rear mounts feature solid 3/4 in. rod ends and are attached using Grade 8 hardware * Durable powdercoated finish
( 19 )
$303.98
—
$339.99
If you've increased the power level of your 3rd Gen, damaged transmission tail housings can be a common and costly issue. QA1 has designed a solution with their Tunnel mounted torque arms and dedicated transmission crossmember to provide greater strength and peace of mind. This increases traction, reduces wheel hop, and reduces dive during braking. The torque arms are a direct-fit with several popular rear end housings. Additionally, QA1's Tunnel mounted torque arms feature pinion angle adjustability, allowing for precise tuning based on your vehicle's setup. The Tunnel mounted torque arms are available to fit OEM, Strange 12-bolts, and aftermarket 9 in. housings, as well as Strange S60 and Moser 12-bolt housings. Select the QA1 Tunnel mounted torque arms designed for your vehicle's application needs. Features and benefits: * Enhanced strength for high horsepower cars * Relocates mounts off the transmission * The torque arm has been rigorously tested to withstand up to 1,000 lbs.-ft. of torque, making it suitable for high-performance builds * The QA1 torque arm installs cleanly with a new transmission crossmember, fitting snugly in the tunnel without compromising ground clearance or exhaust clearance * It utilizes QA1 X-Series chromoly rod ends for mounting to the differential, ensuring strength * A polyurethane bushing at the front mount reduces noise and vibration while maintaining strength and durability * Pinion angle adjustability * Bolt-in design for easy installation
Not Yet Reviewed
$419.95
RideTech has upgraded the traditional notion of sway bars with their MuscleBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MusceBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions
( 24 )
$260.00
—
$495.00
QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.
( 138 )
$292.95
—
$489.95
Clearance
Unity Automotive air spring to coil spring conversions solve the problems associated with troublesome air spring suspension and electronic suspension. These kits include parts and hardware, allowing you to convert to a more conventional setup. Improve handling and consistency without the sacrifice of ride height or quality with the Unity Automotive air spring to coil spring conversions designed for your application.
( 5 )
$264.99
—
$476.99
OER offers a wide selection of steering components for many make and model vehicles, including steering gearboxes. The gearbox in your vehicle makes it possible for you to steer the vehicle to the desired direction. Steering can become a matter of concern if your steering gearbox starts to fail. If you're sure the gearbox is the culprit for poor driving performance, you need a compatible replacement to help you regain steering control. OER steering gear boxes are manufactured with all new tooling replicating the original ratio for a correct replacement. Restore the steering performance of your vehicle with the OER steering gear box designed for your application.
( 2 )
$283.99
Complete your suspension upgrade with Eibach anti-roll sway bar kits. They reduce body roll over stock bars through increased design stiffness. The result is better handling and cornering grip in any performance-driving situation. Eibach sway bars are manufactured from cold-formed steel alloy for precision performance, and finished with a long-lasting red powdercoat. Order the Eibach anti-roll kit designed to fit your application. Product features: * Depending on application, some kits come complete with all mounting hardware, while others may require separate mounting kits * Unimpaired spring comfort at bilateral spring deflection * Decreasing the load difference between the wheels inside and outside the curve * Impacting the under- or over-steering tendency positively (auto-steering behavior)
( 72 )
$255.00
—
$350.00
Rust Buster frame repair sections help you replace those rusted or damaged frame rail areas on your truck or SUV. The EZ slip design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. Rust Buster uses the latest in CAD to model each repair section before it is laser-cut, formed and finish welded. Keep your ride on the road for years to come with Rust Buster frame repair sections.
( 35 )
$279.99
—
$389.99
The rear control arm crossmember on Toyota 4Runners and FJ Cruisers are prone to cracking over time in the center where it supports the fuel tank. Not an ideal situation for such an important structural piece of the frame, considering it also houses the upper control arm brackets, along with the evaporator canister support bracket. When this breaks, it leaves your vehicle undrivable. Thankfully, Rust Buster Frameworks has the solution. Rust Buster rear control arm crossmembers are designed and built to be exact OEM replacements with all the brackets and components to fit perfectly right out of the box. No more having to source your own tube and fabricate all the intricate brackets. Get your Toyota back on the trail where it belongs, not on jack stands in your garage, with help from Rust Buster rear control arm crossmembers. Select the crossmember designed for your model. Features and benefits: * Built to OE specifications * Made from heavy-duty 11-gauge steel * Includes: -- Rear upper control arm brackets -- Evaporator canister bracket -- Fuel tank center support bracket -- Exhaust hanger(s) -- Grade 8.8 hardware -- Tube weld rings OR side boxing plates (depending on kit)
Not Yet Reviewed
$299.99
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$289.95
—
$429.95
Rock Jock Currectlync tie rod tubes enable you to have serious off-road fun with your Jeep—without the worries of breaking the factory steering components. These tubes let you build your own drag link setup for your Wrangler, Cherokee, or Comanche. Upgrade or replace your worn-out original steering parts; order the Rock Jock tie rod tubes recommended for your application.
Not Yet Reviewed
$423.00
Racers know that wheelies may look awesome but they kill performance. Summit Racing™ wheelie bars control wheel stands without over unloading the rear tires. This puts the maximum power potential towards launching and propelling your car forward. These wheelie bars feature a fixed upper stainless steel rod for maximum strength and triangulation, a lower 6061 T-6 aluminum flat bar for fatigue resistance, and natural rubber wheels with aluminum Delrin hubs. These wheelie bar kits include all necessary mounting hardware for a quick and easy bolt-on installation, which also allows you to set clearance of the wheelie bar wheels before you lock them down to the rear housing—no welding is required.
( 16 )
$259.99
UMI Performance sway bars are designed to reduce body roll and understeer and increase cornering capabilities, resulting in a more balanced suspension. The front sway bar is more rigid than the factory model and comes complete with new polyurethane end links and greaseable sway bar bushings. The rear sway bar is supplied with new Grade 8 mounting hardware and locknuts. UMI Performance sway bars are manufactured from 4140 chromoly steel—and formed as one piece to ensure maximum strength and performance. Each rear sway bar is heat-treated and heat-formed to maintain longer memory than a cold bent bar, while the front sway bar is CNC-bent for a precise and accurate fit every time. Order the kit recommended for your vehicle.
( 72 )
$356.82
—
$419.99
PSC Quick Ratio replacement rack and pinions are for your street rod or hot rod. Available in three variations, these Ford power rack and pinion units feature polished aluminum racks with 15 1/2 in. center-to-center mounting.
( 4 )
$399.99
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$359.95
—
$375.95
$323.95
—
$338.35
Instant Rebate
MaxTrac Suspension lowering spindles maintain the factory ride quality. They're designed by taking an OEM spindle and raising the wheel mounting position up, allowing the A-arms to keep the same angles as factory. MaxTrac Suspension spindles are offered in different materials, are simple to install, and retain all factory hardware. They're available for hundreds of applications from 1973 and up. Additional details: * 6082 T-6 aircraft grade aluminum or ductile iron construction * All necessary hardware * Easy bolt-on installation
( 10 )
$297.00
—
$498.80
Get one of these Rhodes Race Cars Pro Series anti-roll bar/sway bar kits for your ride, and let the performance begin! They are available in 24 in. and 36 in. frame rail widths and feature 1 1/2 in. diameter, .188 in. wall 4130 chromoly shafts that pivot on PTFE bushings for smooth and controlled body roll. The 4130 weld-on arms in these RRC kits will not slip or become loose like bolt-on arms. They work on cars up to 1,500 hp and up to 4,000 lbs. RRC Pro Series anti-roll kits come complete with all mounting tabs, rod ends, and Grade 8 hardware.
( 8 )
$340.00
Made from heat-treated 4140 chromoly spring steel, these Hellwig anti-sway bars reduce body roll, even during tight cornering. They come with high-durometer polyurethane bushings to ensure superior performance—and install easily with basic hand tools. Mounting hardware is included.
( 573 )
$277.17
—
$496.19
Crown Automotive steering kits remain an affordable way to eliminate slack in your old OE linkage. Each kit includes tie rod ends, adjusters, and mounting hardware, as well as a steering stabilizer. Crown steering assemblies are engineered to exactly match the factory design, so they're guaranteed to bolt in place of your original linkage without any hang-ups. Order the kit tailored for fitment on your vehicle.
( 11 )
$318.99
Are you looking for a torque arm that will stand up to your 10.50 or lower ET? Look no further. BMR Suspension Xtreme torque arms are constructed from TIG-welded 4130 chromoly tubing to take the punishment of that 8, 9, or 10-second motor, BMR torque arms provide less wheel hop for stronger performance. Additional features: * Gusseted rear mounting bracket made from 3/8 in. laser-cut plate * Solid 4130 rod eyes * Reinforced front bushing mount * Additional cross bracing
( 34 )
$329.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$449.95
$403.95
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$329.95
—
$449.95
These Competition Engineering universal frame rails provide the perfect foundation for just about any race suspension. Available for 4-link and ladder bar suspensions, these mandrel-bent rails provide solid mounting for your suspension and rear axle components, while allowing you to run a low ride height or taller race tires.
( 7 )
$417.99
—
$499.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
