Availability
Showing In Stock Items. Show All 26 Items.
Dorman power steering racks are newly manufactured power steering rack and pinion assemblies that are an upgrade to the factory unit. Each rack features improved seals, free programming and pre-loaded software with a calibration tool. With this software and tool you don't have to take your vehicle to the dealer just to get it programmed. All this convenience—and you get Dorman top-of-the-line quality by each power steering rack unit going through rigorous testing to meet all federal motor safety standards.
( 1 )
$2,020.99
BMR Level 2 suspension handling packages are matched and developed to handle the twists and turns of your favorite road. Installation of these American-made components takes only a few hours of your time with basic hand tools. You can install superior handling on your ride today with BMR Level 2 Suspension handling packages. These BMR Level 2 handling packages include: * Lowering springs * Front and rear sway bars * Bilstein shocks * Upper and lower A-arms * Rear upper and lower control arms * Control arm mount braces
( 8 )
$2,349.00
RideTech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with RideTech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck
Not Yet Reviewed
$3,995.00
—
$4,315.00
Flaming River Chevelle power rack and pinion cradle kits offer classic bolt-in technology. These power cradle kits mount in your chassis' existing factory holes--no cutting, drilling, or welding is required--and basic hand tools get the job done easily! Add a lighter, more responsive steering system with a full turning radius to your classic vehicle, with American-made Flaming River Chevelle power rack and pinion cradle kits. Many Chevelle rack and pinion kits are delivered with: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints * Power steering pump * Pulley * Shafting * Reservoir * Billet swivel floor mount * Sway bar for added stability * On some models, painted or polished tilt steering columns are available options
( 1 )
$2,302.99
—
$3,239.99
QA1 1961-71 D100 independent front suspensions update your classic 2WD Dodge truck with coilover shocks and rack-and-pinion steering. The IFS kits instantly transforming the old-school feel of leaf springs and a straight axle to greatly enhanced truck performance with late-model drivability and the perfect lowered stance. QA1 coilovers make it easy to achieve the ideal look while tuning ride characteristics to meet your unique needs. Choose from kits that offer 3 to 4 in. of drop or 5 to 6 in. of drop to lower the front of your truck while gaining much better geometry. You also have the choice of single or double-adjustable coilovers. Kits come complete with everything you need to bolt in the system. Contents and features of QA1 D100 IFS kits: * Front crossmember * Tubular control arms * Steering rack * Spindles * Ball joints * Inner/outer tie rods * All necessary installation hardware * The kits can be bolted in with simple hand tools without any cutting, welding, or the use of a lift, and can be completed without removing the inner fender aprons * Single-adjustable shocks are recommended for trucks that will be used primarily on the street * Double-adjustable coilovers are recommended for trucks that will consistently be used for drag racing, autocross, or road racing
Not Yet Reviewed
$3,977.95
—
$4,257.95
Flaming River 1968-72 Chevelle power rack and pinion cradle kits modernize and strengthen your current steering system. The precision JIG-welded units install with basic hand tools into your stock steering mounting holes, beefing up your rack gear and still allowing for a full turning radius. Whether you have a small or big block engine, these kits use a unique travel bar system that connects new tubular inner tie rod ends to the original pivot points to reduce bump steer. Numerous kits are available with or without a tilt column and steering pump; and most include wiring connectors, universal joints and shafting, mounting hardware, a billet swivel floor mount, and a polished aluminum mounting reservoir. Enjoy an updated steering system that's lighter and stronger with a Flaming River 1968-72 Chevelle power rack and pinion cradle kit.
( 1 )
$2,731.99
—
$4,813.99
Flaming River 1960-65 Comet/Falcon power rack and pinion cradle kits add modern steering to your classic! These conversion kits require no cutting, drilling, or welding; they simply bolt into your vehicle's original mounting holes using basic hand tools. The units provide more than 6 in. of travel and a full turning radius—and are available with a floor shift or column shift tilt steering column, or no column at all. Flaming River power rack and pinion cradle kits are fluid- and pressure-tested before shipping. Order the model recommended for your Comet, Falcon, or Mercury application. Kits include: * Rack and pinion cradle system * Mounting hardware required for installation * Wiring connector * Universal joints and shafts * Power steering pump and pulley * Polished aluminum mounting reservoir
( 4 )
$2,859.99
—
$3,534.99
Now you can easily give your C20 or R20 truck adjustable ride height, adjustable shock valving and improved geometry with QA1's 1967-1991 C20/R20 front coilover conversion systems. Each kit comes with QA1's proven single or double adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 upper and lower control arms are manufactured from steel tubing for increased strength and powdercoated for long-lasting durability; topped off with performance ball joints and low-friction, maintenance-free bushings. You can easily install the kit in your driveway or garage using basic hand tools. No welding required. Everything is included, all the way down to the hardware. Select the QA1 C20/R20 coilover conversion system for your application needs. Features of 1967-1991 C20/R20 front coilover conversion systems: * Kits are available with single or double adjustable coilover shocks (please specify kit needed when ordering) * Adjustable ride height with up to 1 in. to 3 in. of drop and up to 6 in. with aftermarket spindles * Retains 8-bolt wheels * Improves ride and handling * Single-adjustable shocks with 18 clicks of valving adjustment gives you a very simple way to adjust your shocks without taking them off the truck—you can simply soften or stiffen the ride by turning one knob * Double-adjustable shocks with 18 clicks of independent compression and rebound valving adjustment are great if you really want to fine-tune your shocks on the street or plan to track your truck * No welding required Fitment Notes: Total amount of ride height drop depends on wheel and tire fitment. Requires spindles that use 1971-1986 C20 ball joints.
Not Yet Reviewed
$2,668.95
—
$2,878.95
Replace the early long-shaft steering box in your 1962-67 Nova with Flaming River power rack and pinion cradle kits! These cradle kits mount right into the original chassis locations--no suspension modifications are needed! Flaming River Nova power kits provide a full turning radius, more responsive steering, and install using simple hand tools. You can choose kits with or without columns and for front or rear steer. The front steer reverses the OE steering arms and adds clearance for the use of almost any oil pan. Most power rack and pinion cradle kits include a power steering pump and pulley, a polished aluminum mounting reservoir, and they are pressure/fluid-tested and certified. Get a direct fit with everything you need to upgrade your classic with Flaming River 1962-67 Nova power rack and pinion cradle kits.
Not Yet Reviewed
$2,985.99
—
$3,959.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1963-64 Impala power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These kits feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—no cutting, drilling, or welding is required. (Some models do not include column and/or power steering pump.) Power rack and pinion kits, designed for a floor shift column, include: * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Aluminum mounting reservoir (hoses sold separately) * Tilt column (available on some models)
Not Yet Reviewed
$2,420.99
—
$3,774.99
Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.
Not Yet Reviewed
$2,118.99
—
$3,405.99
Flaming River Impala/Caprice power rack and pinion cradle kits help deliver precision steering on your restoration vehicle. They have a full lock-to-lock turning radius and an adjustable pinion angle. These assemblies also utilize a travel bar design to properly position the steering pivot points to the original location and turning radius. The stabilizer guide clamp provides added stability while driving. Flaming River rack and pinion systems use the factory tie rods to connect the travel bar to your vehicle's spindles. These kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—and no cutting, drilling, or welding is required. Impala/Caprice kits include: * Floor shift tilt steering column * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley
Not Yet Reviewed
$3,598.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1965-69 Impala/Caprice power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These systems feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly--no cutting, drilling, or welding is required. (Some models do not include a column and/or power steering pump.) Most kits include: * Mounting hardware * Wiring connector * Universal joints and shafts * Rack and pinion cradle system * Fluid reservoir * Power steering pump and pulley * Floor shift tilt steering column (available on some models)
Not Yet Reviewed
$3,476.99
QA1 MOD Series coilover conversion systems put the ability to re-valve your shocks—on your car—into the palm of your hand. These innovative shocks feature QuickTune Technology, an industry-first that provides the ability to adapt to any track, any conditions, any time. The technology consists of interchangeable, dry modular valve pack assemblies, that can be thought of as dozens of finely tuned shocks you can hold in the palm of your hand. They define the valving curve of the shocks, and can be changed without interrupting the oil pathways. Simply unscrew from the shock, bolt-in another one with a new pre-determined valving range—and you're ready to go. There's no mess, no contamination, no air intrusion, and no downtime waiting on someone to re-valve your shocks. Ideal for Circle Track and Street/Strip applications, the shocks are available in a variety of extended and collapsed length models to best fit your vehicle. You get everything you need with these QA1 Rear MOD systems, from shocks to nuts and bolts, complete installation instructions, and even decals! Additional benefits and features of QA1 MOD Series shocks: * All new design delivers force, control, and unmatched tenability * Hard anodized aluminum bodies with PTFE—durable, non-galling surface * Double-adjustable shocks with low-speed bleed adjustments * Large solid piston (with blow-off valve)—improved driver feel and control with up to 1,600 lb. force * High-speed valving adjustment (coarse adjustment)—relates to shock operation during impact events, like hitting a pothole or curb * 24 clicks/settings—wider range of adjustment than comparable shocks * Indexable base eyelet—multiple mounting position to optimize knob access and provide more mounting flexibility * Low-speed valving (fine-tune adjustments)—adjusts ride quality and weight transfer on corner entry/exit; more bleed for softer feel and less bleed for stiffer feel * Piggyback or remote canister options * Unique spring adjuster nut and tool * Thrust bearings included * Superior thermal performance, as oil is in constant contact with outer body * One base shock can be upgraded over time to keep up with increased performance levels of your vehicle
Not Yet Reviewed
$2,068.95
—
$2,253.95
Icon Vehicle Dynamics 2.5 VS Omega RR shocks provide your vehicle with outstanding performance off-road and a smooth ride on the street. They feature Icon's bypass valve, externally adjustable, that restricts oil flow through the bypass tube and provides 28 settings of compression and rebound adjustment with no tools required. Icon Omega Series shocks are 100 percent rebuildable and revalvable. Choose the ones designed for your vehicle. Features: * Bypass tubes are replaceable in the event of damage * Remote reservoir (RR) design improves heat dissipation to reduce shock fade during prolonged use * Premium grade 5W shock oil for consistent suspension damping along a wide temperature range * One-piece digressive piston design with vehicle specific valving * 7/8 in. diameter induction hardened, chrome plated shock shaft * PTFE-lined spherical bearings and application specific mounting hardware * CNC-machined 6061 aircraft-grade aluminum components * One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Not Yet Reviewed
$2,060.05
Flaming River Chevelle manual rack and pinion cradle kits offer your American classic modern steering enjoyment! Flaming River manual cradle kits mount in your vehicle's existing steering box and idler arm assembly mounting holes--no cutting, drilling, or welding is required! And basic hand tools get the job done easily! These kits utilize a travel bar design for proper positioning of the steering pivot points to deliver the original turning radius, and they feature a stabilizer clamp for added stability while driving. Your factory tie rods connect the travel bar to your spindles. Add a lighter, more responsive steering system with these Flaming River Chevelle manual rack and pinion cradle kits. These Chevelle cradle kits include: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints * Shafting * Billet swivel floor mount * Sway bar for added stability * Tilt Column (available option on some models)
Not Yet Reviewed
$2,565.99
—
$2,605.99
Flaming River's rack and pinion cradle system for the 1966-67 Chevelle uses a travel bar design to properly position the steering pivot points to the original location and deliver original turning radius. The travel bar system features a stabilizer clamp that provides added stability while driving. This kit uses the factory tie rods to connect the travel bar to the vehicle's spindles. It installs (using basic hand tools) in the original mounting holes for the steering box and idler arm assembly, and does not require any cutting, drilling, or welding. Power Rack and Pinion Kit includes: * Tilt column * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Power steering pump and pulley * Shafting * Aluminum mounting reservoir (hoses sold separately) * Billet swivel floor mount * Sway bar for added stability
Not Yet Reviewed
$2,783.99
Flaming River 1969-74 Nova power rack and pinion cradle kits are direct bolt-in steering systems that upgrade your classic muscle car. They mount right into the original chassis locations—no suspension modifications are needed! These cradle kits provide a full turning radius, more responsive steering, and install using simple hand tools. Most models also include a power steering pump and pulley, and polished aluminum mounting reservoir. Nova systems are fluid- and pressure-tested and certified. Let Flaming River provide the power steering you want for your 1969-74 Chevy Nova.
Not Yet Reviewed
$3,077.99
—
$3,222.99
BDS Suspension steps up the performance and capability of your truck or Jeep with their Fox 2.0 lift kits. Designed to improve stance, each kit includes the necessary components to set your vehicle up right with clearance for larger tires at an affordable price. Featuring a set of Fox 2.0 IFP (internal floating piston) gas shocks, BDS lift kits may also include either ProRide coil springs for improved ride quality and more articulation, Glideride leaf springs to provide full lift height and increased capacity, or steel blocks and add-a-leaf for a level stance from front to rear. Some kits may contain other upgrades along with the Fox 2.0 shocks/struts for improved strength and handling. Select the BDS lift kit engineered for your vehicle. Fox 2.0 Performance Series shocks: * 2 in. impact extruded aluminum body * Internal floating piston (IFP) monotube design * CNC-machined 6061 T-6 aluminum mounting ends * Massive 5/8 in. hard chrome plated heat-treated alloy steel shaft * Race-developed high-flow piston design * Application-specific valving to maximize performance * Long-lasting clear anodized finish
Not Yet Reviewed
$2,178.55
—
$3,699.55
BDS Suspension steps up the performance and capability of your truck or Jeep with their NX2 Nitro shock lift kits. Designed to improve stance, each kit includes the necessary components to set your vehicle up right with clearance for larger tires at an affordable price. Featuring a set of NX2 Nitro Series shocks, BDS lift kits will also include either ProRide coil springs for improved ride quality and more articulation, Glideride leaf springs to provide full lift height and increased capacity, or steel blocks and add-a-leaf for a level stance from front to rear. They may also include other upgrades that add strength and improved handling. Select the BDS NX2 Nitro shock lift kit engineered for your vehicle. NX2 Nitro Series shocks: * Nitrogen-charged * Twin-tube design * 10-stage velocity-sensitive valving * Dual-welded ends for increased strength * 1 3/8 in. high-flow piston * Self-lubricating seals * Silver powdercoat finish
( 1 )
$3,076.55
—
$3,099.55
Up the ante in your truck with the style and performance of BDS Suspension Fox 2.5 Elite coilover lift kits. Designed to improve stance, performance, and capability, kits include everything necessary to set your truck up right with clearance for big tires. Fox 2.5 Elite coilovers include a Dual Speed Compression (DSC) adjuster that allows easy high-speed and low-speed compression tuning for optimal performance in any terrain. Each kit will also include Fox performance rear shocks available in different options, heavy-duty control arms for increased suspension travel, and other matched components to take your truck to the next level. Select the kit designed for your truck.
Not Yet Reviewed
$4,738.65
—
$4,796.60
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
