Availability
Showing In Stock Items. Show All 78 Items.
Build your project exactly how you want with QA1 Level 2 Big Wheel kits! Get the perfect look by easily adjusting your ride height with front and rear coilovers. Raise or lower your car 2 in. the front. Raise it up to 2 in. or lower it by up to 3 in. in the rear. QA1 Level 2 Big Wheel kits allow you to dial-in the exact style you want in minutes with the included spanner wrench. These complete bolt-on suspension kits are designed to fit up to 28 in. wheels on your vehicle and include everything needed to get your Box sitting right, while giving you a better ride and improved handling. Product features and benefits: * Double-adjustable coilovers give you the ability to individually tune your shock compression and rebound to get the perfect ride and get more grip off the line for drag racing * Adjustable upper and lower trailing arms allow your wheel and tire package to fit with adjustable trailing arms that center your rear axle in the wheel well to gain more clearance for up to 28 in. wheels * Tubular control arms are much lighter and stronger than stock and will upgrade front-end geometry for better drivability—and are designed specifically for big wheel cars with corrected suspension angles for large wheels and tires * Tubular sway bars help reduce body roll and improve stability with front and rear sway bars to reduce handling issues that come from big wheels and raised ride heights * Easy, bolt-in installation * Parts come powdercoated and ready-to-install with all necessary hardware to allow you to bolt up the kit right in your garage or work with your local shop * Works with original factory rear axle housings or Quick Performance 9 in. rear axle housings
( 2 )
$5,094.95
—
$5,371.95
QA1 1988-98 C1500 front and rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 front control arms and rear torque arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long lasting durability. Topped off with performance ball joints and low-friction, maintenance-free bushings. Complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This kit will add more stability and allows for optimum camber adjustment in a lowered truck. Easily bolt in this system--no welding or bed removal required. Everything needed is included, all the way down to the hardware.
Not Yet Reviewed
$5,328.95
QA1 1988-98 C1500 rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 torque arm suspension with C-notch bracket is manufactured from 12-gauge HSLA steel tubing for increased strength and powdercoated for long-lasting durability. Systems come complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This easy bolt-on kit will add more stability and allows for optimum camber adjustment in a lowered truck. Everything needed is included, all the way down to the hardware; no welding or bed removal required.
( 3 )
$2,749.95
—
$2,953.95
QA1 Level 1 Big Wheel kits contain everything to give your GM B-body or G-body the ideal stance, plus improved ride quality. Each kit will include front and rear single adjustable Pro Coil system coilovers and an aluminum spanner wrench to dial in the exact style you want. The single adjustable valving allows you to firm up or soften the ride with the simple twist of a knob. QA1 Level 1 Big Wheel kits also include adjustable upper and lower trailing arms that center your rear axle in the wheel well, granting more clearance for larger wheels. Additionally, tie rod adjuster sleeves and a thrust bearing kit complete the kits. The components are powdercoated and ready to install with the necessary hardware, making your installation hassle-free. Choose the kit designed for your vehicle.
( 1 )
$2,529.95
—
$2,884.95
RideTech 1959-64 GM B-body coilover suspension systems are specifically designed for the Impala, Bel Air, Biscayne, Brookwood, El Camino, Kingswood, Nomad, and Parkwood. They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. Get the benefit of a complete suspension system that takes all of the guesswork out of your upgrade with a RideTech 1959-64 GM B-body coilover suspension kit. Features, items, and specs: * Tubular upper StrongArms feature corrected ball joint angles and are fully assembled with ball joints, injection-molded Delrin bushings and cross shafts; powdercoated satin black * Upper ball joint moved back allowing for additional caster settings for improved speed stability and steering feel * Tubular lower StrongArms feature a double-sheer lower mount for increased strength, and are fully assembled with ball joints, injection-molded Delrin bushings and cross shafts; powdercoated satin black * HQ Series coilovers utilize impact-forged aluminum body and monotube design to deliver excellent ride quality and handling; standard 1,000,0001 mile warranty included * Rebound knob located at top of shock for under hood access; allows fine-tuning of ride quality and handling * Hyperco springs provide consistent spring rate that will last a lifetime * Rear StrongArms provide added strength; utilize R-joint technology to provide smooth operation and reduce roll bind * Lower arms feature a double-sheer mount for coilovers, locating them in place of the stock springs and keeping load where it belongs. * Adjustable panhard bar allows axle to be centered at new ride height * Front and rear MuscleBars replace tiny factory sway bars, where applicable; they feature significantly higher rates, performance end links, and Delrin-lined bushings
( 1 )
$5,145.00
RideTech 1978-88 GM G-body coilover suspension systems include everything needed to provide modern drivability for your classic muscle. The rear StrongArm R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing. RideTech 1978-88 GM G-body coilover suspension systems are as comfortable on the street as they are on the racetrack! Features, items, and specs: * Upper StrongArms feature tall ball joints for increased camber gain * Upper ball joints have been moved back to allow for additional caster setting (improves high speed stability and steering feel; offset slugs available for additional caster) * Injection-molded Delrin bushings with 13 percent PTFE used to reduce deflection and stiction * Lower StrongArms feature a double-sheer lower mount for increased strength * Dropped lower shock mount to increase suspension travel * Lower ball joint moved forward to increase caster settings, while keeping the wheel centered in the wheel opening * HQ Series coilovers allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of front coilovers for underhood access) * Brackets included with rear coilovers for easy attachment to the frame and the 10/12 bolt rear-end * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink end links that provide immediate engagement between chassis and control arms) * Rear MuscleBar * Rear StrongArms provide added strength to help get the power to the pavement
Not Yet Reviewed
$5,420.00
QA1's 4-link conversion and narrowed Ford 9 in. axle kits are an all-in-one solution that gives you everything you need to get your First-Gen Camaro or Firebird project on the road—fast. QA1 paired their 4-link suspension kit with a custom narrowed 9 in. rear housing for enthusiasts seeking top-tier performance and hassle-free installation. Your time is valuable, so say goodbye to hunting for junkyard rear ends or struggling with endless measurements and mismatched components—every component in this package is tested by QA1 to fit the first time. These QA1 upgrade kits have been engineered to deliver the performance, ride quality, and adjustability you need to handle serious power and aggressive driving—without the hassle of having to outsource each part. Ultimate shock performance: Ditch your leaf springs for QA1 MOD Series coilovers, triangulated 4-link suspension and an all-new narrowed 9 in. rear end. QA1's MOD shocks are designed to provide the ultimate in tunability and performance. With their four-way adjustable valving, remote nitrogen canisters, and huge dampening forces, QA1 MOD shocks deliver in any driving scenario. QA1 4-link kits are fully engineered to provide ride height, ride quality and instant center adjustability. Whether you're after a lowered, aggressive look or need clearance for wider wheels and tires, QA1 systems deliver. Easy installation: QA1 is committed to delivering products that make upgrading your car as simple as possible, and their 4-link kits with 9 in. housing are designed for a bolt-on installation, eliminating the need for custom fabrication. Key Features: * Narrowed housing to accommodate wide wheel and tire packages in mini tubbed cars * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets reduce flex under high loads, ensuring your suspension remains rigid * Heavy-duty 3 in. OD, 1/4 in. wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Durable semi-gloss powder coat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and Jack Pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability
Not Yet Reviewed
$4,223.95
—
$5,261.95
AEV Conversions first introduced OE-level suspension engineering to the aftermarket over a decade ago. They continue to build on that legacy today, while also broadening their spectrum of suspension performance with the introduction of DualSport XP Suspension System for a variety of Jeep and RAM applications. The factory suspension on many vehicles is soft, lightly damped and with a low suspension frequency. This "soft tuning" can make the handling feel a bit loose and uncontrolled—not the ideal suspension formula for overland enthusiasts who also need to manage lots of cargo and gear when traveling off the grid. As with all AEV expedition-ready suspension systems, coil spring and shock tuning was essential to provide the optimal balance of load-carrying capacity and ride quality that customers have come to expect from AEV. The DualSport XP Suspension System includes a set of frequency-tuned, triple-rate coil springs to provide 2.5-3 in. of additional front and rear ride height. Customers can now fine tune their DualSport XP Suspension System even further by choosing one of two available coil spring options: * 2.5 in. Standard Load Coil Springs are optimized for a vehicle with typical gear/cargo inside. This means the ideal ride height, handling and overall performance will be achieved on a vehicle with steel bumpers, winch, full-size spare and recovery gear (+0-400 lbs. over factory weight). * 3 in. High-Capacity Coil Springs are specifically designed for overland enthusiasts who have a fully outfitted vehicle that is also consistently loaded with heavier gear (+400-700 lbs. over the standard load spring), such as modular cargo systems or roof rack/rooftop tent combinations. These coil springs are then paired with a set of AEV-tuned, Bilstein 8100 Series reservoir shocks for improved performance and consistency over rough terrain at higher speeds. The AEV/Bilstein coil spring and shock combination used in this suspension increases both up travel and down travel, while also providing better articulation and improved off-road speed potential and bottoming control. Even when towing, the suspension feels stable, planted, and confidence inspiring. AEV optimizes front and rear suspension geometry throughout the entire range of motion, tightening up the handling and road feel, resulting in a great ride and performance without introducing harshness or driver fatigue. In the front, a pair of AEV's heavy-duty, stamped control arm geometry correction brackets are included for improved ride quality and reduced nose-dive under hard braking. A rear track bar tower extension is included to raise the rear roll center, reduce body-roll and generate a better turn-in response. Extended-length front and rear sway bar end links compensate for the additional lift height, while new front and rear bump stop spacers improve bumper/axle contact under full articulation and jounce. Due to this suspension system's lower lift height, there is no need to swap out any of the OE track bars, control arms or steering components. Order the AEV Conversions DualSport XP suspension kit recommended for your vehicle!
Not Yet Reviewed
$3,266.74
—
$3,664.47
Tremendous front grip and a host of features can be yours with UMI Performance Competition front-end kits. The included A-arm kit enables 10 degrees caster while maintaining standard track width and wheelbase. Lower A-arms are assembled with tall lower ball joints to optimize roll center, camber gain, and center of gravity. Lower A-arms feature Delrin bushings for smooth travel and bind-free performance. The new lower A-arm works in conjunction with the included adjustable upper arm—which features minimum shim adjustability, Pro Forged ball joints, and super-smooth PTFE lined rod ends. The front sway bar attaches using UMI's swivel-style end link design and double shear mounting system. The included Viking Crusader coilover shocks mount to the lower A-arm in double shear quick-change brackets. The lower shock mount is removable to allow spring and shock changes at the track. UMI's kit features Viking Crusader shocks with AT pro-touring valving (high rebound tie-down for road race and autocross) and a true 2.5 in. racing coilover. The upper stud mount fits in the factory location, while the lower is optimized to fit UMI's 3057-1 coilover lower A-arm. Some grinding is required for installation in the upper frame spring bucket. Other spring rates and valve codes are available. The Competition kits have been battle-tested on the iconic UMI Green Machine. Kits are available in red or black powdercoat; and are 100 percent designed, manufactured, and raced with pride in the USA.
( 1 )
$2,259.99
—
$2,289.99
RideTech 1967-70 GM B-body coilover suspension systems include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These complete kits contain StrongArms, MuscleBar sway bars, and HQ Series coilovers, removing the guesswork out of purchasing the right components that will deliver the best performance and ride quality. Features include: * Upper StrongArms--powdercoated black and fully assembled with ball joints, bushing, and cross shafts. They feature corrected ball joint angles and the upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. * Lower StrongArms--double sheer lower mount for increased strength. They are powdercoated black and fully assembled with ball joints, bushing, and cross shafts. * HQ Series coilovers--utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via rebound knob located at the top of the shock for underhood access. * Hyperco springs are used to provide a consistent spring rate that will last a lifetime. * Front MuscleBar helps reduce body roll and includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. * Rear MuscleBar allows for fine tuning by sliding the arm on the bar to increase or decrease rate * Rear StrongArms provide added strength to get power to the pavement. R-Joint technology provides smooth operation and reduced roll bind. Lower is double sheer mount for coilovers, locating them in place of the stock springs. Upper arm and panhard bar are adjustable, allowing axle to be centered and pinion angle to be set.
Not Yet Reviewed
$5,330.00
Transform your Fox Body's handling with a RideTech 1979-93 Mustang Independent Rear Suspension System. It's no secret that independent rear suspensions (IRS) are superior in almost every way over a stick axle. The biggest concerns are cost and ease of installation. This independent rear suspension system replaces the stock live design with tubular upper and lower control arms utilizing custom-made spindles with S550 Mustang hubs. Camber, roll center, and toe angles were also optimized for greatly increased handling. The bolt-in design requires no welding for installation, as the IRS cradle is designed to mount to the rear frame rails and modified factory mounting points. If you want to optimize the rear suspension of your Fox Body Mustang, do it with this highly engineered IRS system so you can hit the track or street with confidence. Key features and benefits: * High-quality, no compromises manufacturing * Durable powdercoat finish for great looks and corrosion resistance * 100 percent bolt-in design requires minimal modifications * Lowers stance approximately 2 inches—reduces center of gravity without adversely affecting suspension geometry * Reduces upsprung weight creates premium ride quality * Low roll center (5 in.)—one degree of camber gain and zero bump steer inspires confident cornering for improved suspension geometry over OE suspension design and much more enjoyable to drive * 50 percent anti-squat provides excellent traction * Delrin control arm bushings eliminate deflection—no wheel hop, and no noise and no lubrication of bushings required * Retains factory track width * Compatible with mini-tubs (cradle attaches to the inside of the frame rails) * Modular design—works with Ridetech coil-overs or ShockWaves (sold separately), HQ and TQ (Triple Adjustable) versions are also available * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance Fitment Information: * Uses S550 (2015+) Mustang differential (not included)—new units can be purchased from Ford Performance, and Takeout units are also available * Uses shortened S550 (2015+) Mustang axles (not included)—standard strength are available from RideTech * Allows direct bolt-on of both stock SN95 Cobra (1999-2004) or S550 (2015+) rear OE or aftermarket brakes via Ridetech caliper brackets. * Works with 1999-2004 Cobra cat-back exhaust * Requires shortened drive shaft and pinion flange to U-joint adapter (use Sonnax part T35-ALFY-09 or T35-ALFY-10) * Works with Ridetech coilovers or Shockwaves, sold separately * Optional adjustable rate rear sway bar is available for additional fine-tuning
Not Yet Reviewed
$4,500.00
RideTech TruTurn steering systems resolve poor suspension geometry, bad bump steer, and clearance issues on your early Camaro/Nova front-end. These packages include taller overall spindles to improve camber gain, steering arms designed to correct bump steer, and drag link brackets that bolt to your OEM drag link. They relocate your inner tie rod and minimize bump steer, and their tie rod assemblies are designed to integrate with your new steering arms and center link for a bolt-on system. RideTech also offers upgrade packages with the same components minus the spindles. Choose a "Tru" no-fab steering system for your muscle car. They're available for a variety of cars from the 1960s and '70s
( 6 )
$3,415.00
KW HLS lift systems are designed to lift your sports car or lowered vehicle to safely negotiate obstacles such as speed bumps, railroad crossings, road construction, garage approaches, and underground car parks. Due to the low center of gravity, many performance cars have less ground clearance than is needed to get over obstacles in the road, and can risk bottoming out--doing damage to aero components, underbody parts, or the oil sump. To prevent the possible risk of damage, these lift systems will hydraulically raise either the front or all four corners, providing extra ground clearance. The KW HLS systems are available for many factory struts and coilovers, as well as upgrades for your KW coilovers (sold separately).
Not Yet Reviewed
$5,364.00
RideTech 1979-93 Mustang bolt-in SLA (Short-Long-Arm) front suspension systems replace the stock McPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry. This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. These suspension systems are compatible with either Ridetech coilovers or Shockwave air suspension (sold separately). SLA front suspension systems are available in two fitment styles: * To fit STOCK K-Members (except 84-86 SVO) * To fit many AFTERMARKET K-Members, including Maximum Motorsports, Team Z, AJE and UPR Additional product features: * Incorporates an upper control arm to induce much-needed negative camber gain * Caster, roll center, bump steer and Ackerman angles are optimized * Bolt-in frame surrounds create attachment points for the upper control arms and the shocks. This keeps the load on the frame rails for maximum strength and reduced NVH * Upper and lower arms feature Delrin© bushings infused with PTFE to minimize stiction and eliminate the need for lubrication * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance * Lower control arm design improves tire clearance and steering angle 30 degrees with up to a 275mm wide tire Fitment: * Uses S550 (15-23) or SN95 (94-04) Mustang brake systems (caliper brackets sold separately) * 17 in. minimum wheel diameter * Compatible with stock and most aftermarket sway bars Specifications: * Negative camber gain: 1.25 degrees/in. * Positive caster: 7-9 degrees * Bump steer: under .050 in. * Lowers ride height: 1-2 in. * 50 lbs. lighter than stock suspension * Stock track width
( 1 )
$3,300.00
—
$3,650.00
Flaming River 1962-64 Galaxie rack and pinion cradle kits are designed for Ford Galaxie and other full size Fords. They provide power steering for modern driving comfort, especially when parking. The cradle mounts in the original chassis location with no chassis modification and the center support does not have to be removed. Kits are available with a choice of either paintable mill or polished stainless steel columns. Kits are available with or without a steering column. Kit includes: * Billet aluminum reservoir * Power rack and pinion cradle system * All Grade 8 mounting hardware
( 1 )
$2,396.99
—
$3,201.99
Bilstein B16 suspension kits can equip your vehicle with a race-inspired system that delivers unsurpassed driving performance and high performance tuning. Kits reveal monotube gas shocks with manually adjustable 9 or 10-stage precision compression and rebound settings to take your vehicle from comfort mode to competition-ready with the turn of a dial. Their threaded bodies permit the accurate adjustability of the front and rear progressive rate springs to achieve the vehicle ride height, center of gravity, and the level of handling you desire. Whether you're cruising or competing, Bilstein B16 suspension kits put performance control in your hands. Features and benefits: * Threaded body adjustable range of 20mm at both axles * Lowering of approximately 30-50mm at front and rear * Road-tested and fine-tuned by Bilstein ride engineers--under extreme motorsports conditions * Spring plates and locknuts made from a special aluminum alloy * Triple-C-Technology surface coating--long-lasting corrosion resistance * Round threads for easy adjustment * Quality sport springs made from highly durable material * Gas pressure technology * Bilstein monotube technology--made in Germany
( 3 )
$2,001.00
—
$3,589.00
QA1's 4-link conversion and standard Ford 9 in. axle kits give you everything you need to get your 2nd Gen Camaro or Firebird project on the road—fast. QA1 paired their 4-link suspension kit with a custom 9 in. rear housing for enthusiasts seeking top-tier performance and hassle-free installation. Your time is valuable, so say goodbye to hunting for junkyard rear ends or struggling with endless measurements and mismatched components—every component in this package is tested by QA1 to fit the first time. Each kit is engineered to deliver the performance, ride quality, and adjustability you need to handle serious power and aggressive driving—without the hassle of having to source each part. Ultimate shock performance: Ditch your leaf springs for QA1 MOD Series coilovers, triangulated 4-link suspension and an all-new narrowed 9 in. rear end. QA1's MOD shocks are designed to provide the ultimate in tunability and performance. With their four-way adjustable valving, remote nitrogen canisters, and huge dampening forces, QA1 MOD shocks deliver in any driving scenario. QA1 4-link kits are fully engineered to provide ride height, ride quality and instant center adjustability. Whether you're after a lowered, aggressive look or need clearance for wider wheels and tires, QA1 systems deliver. Easy installation: QA1 is committed to delivering products that make upgrading your vehicle as simple as possible, and their 4-link kits with 9 in. housing are designed for a bolt-on installation, eliminating the need for custom fabrication. Performance housing features: * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets reduce flex under high loads, ensuring your suspension remains rigid * Heavy-duty 3 in. OD, 1/4 in. wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Durable semi-gloss powder coat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and Jack Pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability
Not Yet Reviewed
$4,223.95
—
$5,261.95
Rock Krawler X Factor No Limits mid-arm suspension lift kits are specifically designed for Rubicon drivers who want a complete bolt-in installation, maximum articulation from a mid-arm kit, and the durability and off-road performance you expect from Rock Krawler Suspension. The No Limits front sway bar links allow Rubicon owners to use the factory sway bar disconnect function and still achieve maximum articulation. The X Factor Series adjustable lower control arms offer a total of 90 degrees of misalignment for less binding. Rock Krawler's industry-leading triple rate coils give you plenty of lift and improve the on-road ride over the factory linear rate springs. All Rock Krawler systems include two rear spring seats, as well as the corresponding two front spring pads. The provided track bar geometry corrections, both front and rear, let you perfectly center the axles so there is no compromise in on-road handling. Tackle the trails and the streets with a Rock Krawler X Factor No Limits mid-arm suspension lift kit.
Not Yet Reviewed
$2,968.02
—
$3,015.52
Vintage-styled, yet modern, Johnson's Hot Rod Shop rear ladder bars evolve the age-old design of rear radius rods to perfection. Their ladder bars firmly locate the rear-end housing of your hot rod while achieving a smoother ride and better traction under hard acceleration. The bars have been engineered for use on either a transverse Model A buggy spring, or a coilover rear suspension. Johnson's ladder bars are manufactured from T6061 aluminum with a machined or show-quality polished finish. They measure 42.75 in. center-to-center and are sold as a pair complete with hardware, weld-on rear end housing brackets, and a weld-on ladder bar crossmember for center K-members. A variety of distinctive styles are available, along with matching front radius rods (sold separately). Johnson's rear ladder bars deliver superior strength and clean lines for your hot rod.
Not Yet Reviewed
$2,208.00
—
$2,808.00
KW Variant 1 coilover kits are optimally adjusted for sporty driving, comfort, and safety. They enable you to drop your ride's center of gravity and customize the height at all four corners. KW Variant 1 twin tube coilover kits are designed with shorter INOX-Line stainless steel strut housings for more spring travel, anodized aluminum spring collars for durability, and high-tensile racing springs for strong support and comfort. Order the model with options recommended for your vehicle.
( 1 )
$2,044.00
—
$3,344.00
Elevate your truck or Jeep to new heights with Belltech's all-new suspension lift kit systems. They're precision-engineered to ensure every aspect was considered to provide you with the highest quality and best performance. Through innovative design with the focus on performance, these suspension systems are the best-riding lift kits on the market, period—built to ride, handle, and tackle off-road obstacles with ease! Here are details for Kit 152650BK: Give your truck the off-road look you desire with Belltech's new Ford Bronco Sport 1.5 in. Lift Kit. It allows the ideal amount of lift to add larger wheels to your vehicle, which not only improves its appearance and capability, but can also provide increased traction and grip while driving. This product was designed with straightforward installation, making for a quick and simplified change to your Ford. Included in the lift kit, are custom-designed, adjustable end links which are zinc coated to prevent rust. The end links ensure your OE sway bar does not make contact with any parts of your vehicle in its newly modified condition. To provide lift, the kit includes front strut spacers (which attach directly to the top of your OE front struts) and coil spacers for the rear. To maintain proper suspension geometry and keep your wheels centered within the fenders, this kit includes rear trailing arm drop brackets. All components are powdercoated to prevent rust and reduce wear. Furnish your new Ford with a unique look that will last with the new Belltech Ford Bronco Sport 1.5 in. Lift Kit.
Not Yet Reviewed
$2,195.00
—
$3,597.00
Speedtech Performance USA torque arm rear suspensions dramatically improve performance handling and everyday drive quality of your leaf spring car. Unique in their design, the suspensions virtually eliminate the inherent change in geometry and possible traction issues commonly associated with leaf spring and 3- or 4-link type systems. Relatively easy to install and reasonably priced, they're perfect rear suspension upgrades to a well-matched performance front suspension. Speedtech Performance USA torque arm rear suspension facts and features: * Adjustable ride height, roll center, pinion angle, instant center, and wheelbase * Articulate lower control arms aid in eliminating suspension bind * Panhard bar mounting system accurately locates rear axle and allows for instant center adjustability * Delrin bushings eliminate the flex of rubber and squeak of poly bushings * QA1 double adjustable coil-over shocks with thrust washers * Coilover shocks allow 2 1/2 in. of ride height adjustment * Available for 9 in. Ford, 12-bolt and 10-bolt GM differentials * Optional complete rear axle with all brackets installed
Not Yet Reviewed
$2,859.99
—
$3,349.00
BMR torque arm suspension kits are designed to eliminate the rear leaf springs, replacing them with a custom upper crossmember, adjustable control arms, and adjustable coilover shocks. They will provide lateral stability for acceleration and traction, and centered suspension articulation for bind-free handling. The kits feature a precision side-to-side axle positioning Watts link. The Watts link pivot is machined from 6061 billet aluminum and utilizes greasable, internally fluted Delrin bushings for a long, trouble-free life. Best of all, the Watts link is double-shear supported, unlike any other designs on the market today. Every component in the BMR torque arm suspension kits is completely adjustable. The torque arm itself provides pinion adjustability. The control arms are adjustable in length and have multiple mounting holes plotted in an arc to provide adjustment for anti-squat characteristics, giving your ride superior handling and traction. Help your street machine or track car realize its full potential with these BMR torque arm suspension kits.
( 2 )
$2,249.95
Detroit Speed offers Fox Body short long arm conversion systems for a variety of applications, including many Ford Mustang and Mercury Capri models from the 1970s, '80s, and '90s. These suspension kits redefine Fox Body handling with a no-compromise double wishbone design. They system replace the outdated factory suspension with modern geometry, increased strength, and race-proven adjustability—delivering premium fit, finish, and performance. * SUPERIOR SUSPENSION GEOMETRY and STABILITY: Detroit Speed's exclusive frame rail insert optimizes camber gain and roll center height, significantly improving front-end stability. The tubular upper and lower control arms reduce deflection, providing precise suspension movement and sharper handling response. * FORGED UPRIGHTS & EXPANDED BRAKE OPTIONS: Lightweight forged aluminum uprights feature modern hub-pack bearings for durability and reduced maintenance. This setup provides access to high-performance braking solutions for superior stopping power. * MAXIMIZED TIRE CLEARANCE: Designed for serious performance applications, these systems allow clearance for 275/35R18 tires on a 10 in. rim while maintaining full steering lock. Whether on the street or track, this setup ensures maximum grip without compromise. * FACTORY COMPATIBILITY, PERFORMANCE UPGRADE: These systems are optimized for factory 1987-93 V8 K-members and aftermarket K-members, ensuring seamless integration into high-performance builds. Some fabrication is required, but the result is a modernized, precision-tuned suspension that outperforms factory limitations. Available versions: * Single-Adjustable Coilover Control (032096-SDS): Detroit Speed/JRi aluminum coilovers offer Detroit Tuned valving for precision damping control with a single adjustment to fine-tune rebound. Combined with a 1 7/16 in. diameter adjustable-rate sway bar, this system delivers unmatched street and track performance. * Double-Adjustable Coilover Control (032096-DDS): Detroit Speed/JRi double-adjustable aluminum coilovers feature Detroit Tuned valving, allowing independent tuning of high and low speed rebound for maximum control. Paired with a 1 7/16 in. adjustable-rate sway bar, this system delivers fully customizable handling for both street and track applications. * Non-Adjustable High Performance Coilover Control (032096DS): Detroit Speed/JRi non-adjustable aluminum coilovers feature Detroit Tuned valving, delivering precision damping. Paired with a 1 7/16 in. diameter sway bar, this system provides optimized handling and stability for both street and track applications. FEATURES AND BENEFITS: • Optimized camber gain and roll center height for better handling stability • Tubular upper and lower control arms improve suspension geometry and reduce deflection • Forged aluminum uprights with modern hub-pack bearings for durability and reduced maintenance • Adjustable 1 7/16 in. diameter sway bar for improved front-end response • Clearance for up to 275/35R18 tires while maintaining full steering lock • Detroit Speed/JRi aluminum coilover shocks for precision damping (options): -- Single-adjustable -- Double-adjustable -- Non-adjustable
Not Yet Reviewed
$5,199.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
