Availability
Showing In Stock Items. Show All 20 Items.
Fox Racing Shox QSE (Quick Switch Electric) sway bar disconnect links are bolt-on solutions featuring links, a wiring harness, and a dash switch. You will be able to rapidly disconnect or connect the sway bar on the fly from the cab. Experience a new sense of control through technical terrain and reduce head toss with the flip of a switch. Select the front and/or rear QSEs designed for your off-road machine. Features: * Connect or disconnect the sway bar in any vehicle position * Digressive tune provides stability while the sway bar's disconnected * High-speed response time -- Disconnect the sway bar in less than a second * Plug-and-play wiring harness * LED back-lit dash switch * One-piece, aluminum spherical bearings * Impact extruded, CNC-machined 6061 T-6 aluminum Type III anodized aluminum body * 1/2 in. hard chrome shaft * External reservoir with internal floating piston (IFP) * Application specific fitment * Corrosion resistant Note: Front links do not come with a power harness. A rear kit must be purchased to obtain it.
Not Yet Reviewed
$1,199.99
—
$1,399.99
Arnott Ultimate Ride Series shocks help to prevent rider fatigue and strain. These shocks are FOX street performance monotube construction, and they are an exceptional upgrade to your ride. They feature advanced high-flow, deflective disk, velocity-sensing dampening, and the air bladder is made from a multi-ply Goodyear rubber. The protective cans shield the air bladder from dust and debris. Some kits will include a powerful air compressor with vehicle specific mounting hardware, and a handlebar or remote mounted inflation switch. Optional rebound control enables the rider to adjust the internal dampening of the shock for a smoother ride. All shocks and inflation switches come in black or chrome finishes.
( 3 )
$1,137.59
—
$1,563.29
On Sale
Fully assembled and bench-tested ARB on-board high performance air compressors install into your vehicle and include a full, snap-together, fuse-protected wiring loom with solenoid plug-in contacts, mounting hardware with reinforcing bracket, and an OEM-quality compressor isolating switch. With the addition of an ARB-171302 pump-up kit (sold separately), they can be used to activate ARB Air Lockers, and perform other functions such as inflating camping gear. So what makes these compressors special? They're small enough to fit into even the tightest space and quiet enough to mount in the cab. They have enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes. And, they work. ARB has tested these units in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and they continue to perform. Features of ARB on-board high performance air compressors include: * Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply * Fully sealed components for moisture and dust protection * Over-pressure safety valve-equipped * Pressure switch-controlled air manifold system specially designed for ARB Air Lockers * Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life * Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing * Motor is internally thermal-protected against extreme temperature damage * Comprehensive-photo illustrated installation guide * Range of accessories available
( 9 )
$1,113.55
$1,002.20
On Sale
Lower your ride, improve your handling, and get control over your suspension with these Air Lift air management systems. They are the most versatile choice for suspension on today's market. Go from the strip to the street to the show floor with the push of a button. Air Lift's air strut kits are designed to give you maximum performance with their 9-way adjustable dampening system previously found only on high-end coilovers. Do you want to adjust your spring rate as well? No coilover will ever offer this option! Adjust your spring rate with the flip of a switch. When style matters just as much as performance, Air Lift's air struts won't let you down. Wheel gap never helped anyone win a car show! Tuck those rims up where they're supposed to be. These kits will set you on the ground and let you clear speed bumps and get in and out of driveways without scraping your ride--not to mention offering you the remarkably smooth ride that air provides.
Not Yet Reviewed
$1,740.00
$1,392.00
RideTech RidePro Analog compressor systems use a 5-gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 5-gallon tank and dual compressor design is recommended for vehicles 3500 pounds or more. This system includes a separate aluminum 5-gallon tank, RidePRO air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. RidePro analog compressor systems utilizes a high-quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.
Not Yet Reviewed
$1,620.00
QA1 lowering kits achieve the ideal lowered look for your truck. Available for 2WD and 4WD models, each kit features QA1's front Pro Coil coilovers and Rear Drop Kit, which provide adjustability to achieve the perfect stance, while providing significant improvements to ride quality and performance. For an all-in-one solution to upgrade the suspension of your truck, choose the QA1 lowering kit designed for your vehicle. Features: * Easy bolt-in installation * Adjustable ride comfort and handling ability -- QA1 Proma Star single and double adjustable shocks deliver exceptional ride quality and performance with the simple turn of a dial, allowing you to effortlessly switch between a comfortable cruise and a more aggressive feel for daily driving or twisty backroads * Adjustable front and rear ride height -- Fully threaded front coilover shock bodies provide adjustment without the use of clumsy shims or spacers, while the rear drop kits offer 2 in. of adjustment to dial in the final rake of the truck. * Heavy-duty shock design -- Upgraded shock with polyurethane bushings (specifically chosen to withstand the daily use of trucks) and a 1 in. chromoly T-bar. * Lifetime warranty -- Lifetime coverage of the QA1 shocks * Rear flip kit, shackle and hanger kits -- Lower the rear of your truck without compromising ride quality -- Heavy-gauge steel construction, powdercoated finish, and top-notch hardware guarantee long-lasting performance in any driving conditions
( 1 )
$1,351.95
—
$1,527.95
Fox Racing Shox offers Performance Series 2.0 QS3 shocks for a variety of applications, including select Polaris and Can-Am utility vehicles from 2008 and up. Fox has taken the baseline stock suspension platform of the RZR 900 and bumped up the technology to provide a better tune for trail riding. Extra adjustability is provided in three simple clicks of the compression switch, and the piggyback reservoirs add extra damping for more control. The Performance Series 2.0 Podium quick-switch 3 (QS3) front and rear coilover shock kits are designed to be bolt-on ready. These monotube shocks are an upgrade from the stock twin tubes, which can't take the heat from repeated abuse. Performance Series 2.0 kits are also rebuildable, providing peace of mind and performance at the same time. A simple click of the switch allows for three manual settings to tackle any terrain. Enjoy riding more with the proven trail tune upgrade from Fox. Product features: * High-flow velocity-sensitive damping * Fully re-buildable and re-valvable * Ultra-durable bottom-out bumper * Type III hard-anodized aluminum body and reservoir * Hard-chromed shaft * Standard or heavy-duty spring rate * Spring Type * Progressive single coil * What's in the box? -- 2 shocks -- Spring preload spanner wrench -- Alignment kit -- Instructions and user manual -- Fox sticker
Not Yet Reviewed
$1,399.99
RideTech RidePro Analog compressor systems use a 3 gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 3 gallon tank and single compressor design is recommended for vehicles under 3500 pounds. This system includes a separate aluminum 3 gallon tank, RidePRO air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. RidePro analog compressor systems utilizes a high quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.
( 4 )
$1,370.00
Fox Racing Shox offers QS3 QSR remote reservoir shocks for a variety of applications, including many Harley-Davidson© street bikes from 1984 and up. These rear shocks feature 3-position compression and rebound switches for easy adjustments. Quick Switch compression (QS3) 3-position adjustments on the piggyback reservoirs allow you to select between three specific settings: maximum comfort, extra support during hard acceleration, or most responsive and precise handling. Quick Switch rebound (QSR) settings make it easy to dial in the correct rebound for different riding situations: comfort on bumpy backroads, "any road" balance of control and comfort, and a "glued to the asphalt" feeling on smooth twisty roads. Available with a standard weight spring for rider weight up to 240 lbs., or a heavyweight spring for rider weight up to 389 lbs. Features include: * Model-specific optimized ride tune * Spring preload setting guide marks * Aluminum remote reservoirs with custom mounting brackets * Gas-charged mono-tube with internal floating piston (IFP) design * 6061-T6 aluminum Type III hard-anodized bodies * Fully rebuildable and re-valvable * Advanced high-flow, deflective disc velocity-sensitive damping * Low-friction, super-finished hard chrome shafts * Matte black springs and black-anodized preload rings * What's in the box? -- 2 Shocks -- 2 mounting brackets for 2014+ HD touring models -- Mounting hardware -- Spring preload spanner wrench -- Instructions and user manual -- Fox sticker (Combine with the new FOX GRIP Street Performance Fork Cartridge Kit to achieve ultimate comfort and control.)
( 1 )
$1,599.99
Fox Racing Shox offers Factory Race Series 1.5 Zero QS shocks for a variety of applications, including many Polaris, Lynx, and Ski-Doo snowmobiles from 2011 and up. These Quick Switch (QS) coil shocks are the next generation of lightweight mountain sled suspension technology. Ride harder in the backcountry with less fatigue without a compromise of durability—and experience a new sense of control on top of the snow due to less outboard weight. Fox's QS technology allows you to adjust the compression and rebound damping with ease to suit the conditions. Three positions keep the adjustment simple, so you focus on the ride instead of counting clicks. The rear track is also equipped with a lockout mode to prevent trenching the next time you get in the deep snow or climbing steep faces. Fox designed the coil-sprung mountain shocks with two primary objectives: weight reduction and ride performance. They optimize the 1.5 Zero coil-sprung shocks through material reduction without a sacrifice of ride quality or structural integrity. Additionally, the coil springs were redesigned to retain the same spring rate but with fewer coils and built from a lighter steel alloy. The shocks maintain a linear feel regardless of temperature fluctuation, which keeps your sled setup quick and simple. The new coils result in a spring with the same performance at half the weight. Fox's position-sensitive damping technology, with origins in desert truck racing, is now applied to the Factory Race Series coil-sprung shocks. Spiral grooves inside the shock allow the oil to flow around the main piston, reducing damping force in the ride zone for a plush feel. The bypass grooves terminate through the final 30 percent of the travel, forcing oil to only flow through the main piston and providing a significant increase of bottom-out resistance to cushion any hard hits. Maximize the power-to-weight ratio of your sled by bolting on Fox's new mountain shocks! * Adjustments: -- Spring preload -- QS3: 3-position compression (track front), with lockout mode (track rear only) -- QSR: 3-position rebound (track front) Features: * Optimized lightweight spring and shock design * Spiral groove bypass * Fox Ice Scraper Technology (FIST) * One-piece, aluminum spherical bearings * High-flow velocity-sensitive damping * Fully re-buildable and re-valvable
Not Yet Reviewed
$1,299.99
—
$1,699.95
Maximize your sled's performance by bolting on Fox's trail/crossover shocks equipped with Rifle Bore position-sensitive technology and QS3 adjustment. Providing the performance advantage Fox is known for, Fox Racing Shox Factory Race Series 2.0 QS3 shocks enable you to ride harder with less fatigue, without compromising durability, and providing a new sense of control on the snow due to velocity and position-sensitive damping technology. Fox Quick Switch (QS) coil shocks adjust between three compression settings to provide maximum comfort, extra support, and precise handling. You can quickly adjust the compression damping to suit snow conditions—with your gloves on. Fox Factory Race Series 2.0 QS3 shocks are available for front (ski) or rear (track), and Fox's position-sensitive damping technology, Rifle Bore, is now applied to the Factory Race Series rear track shock. Spiral grooves inside the shock allow the oil to flow around the main piston, reducing the damping force in the ride zone for a plush feel. The grooves terminate through the final 30 percent of the travel, forcing oil to flow through the main piston. The result is a significant increase in bottom-out resistance to cushion hard hits. Select the Fox 2.0 QS3 shocks designed for your snowmobile. Additional features: * Optimized lightweight spring and shock design * Fox ice scraper technology (FIST) * One-piece, aluminum mounting hardware * High-flow velocity-sensitive damping * Rifle Bore technology (rear track shock only) * Fully rebuildable and re-tunable * Internal floating piston (IFP)
Not Yet Reviewed
$1,299.99
Fox Racing Shox offers QS3 QSR piggyback shocks for a variety of applications, including many Harley-Davidson© street bikes from 1991 and up. These rear shocks feature 3-position compression and rebound switches for easy adjustments. Quick Switch compression (QS3) 3-position adjustments on the piggyback reservoirs allow you to select between three specific settings: maximum comfort, extra support during hard acceleration, or most responsive and precise handling. Quick Switch rebound (QSR) settings make it easy to dial in the correct rebound for different riding situations: comfort on bumpy backroads, "any road" balance of control and comfort, and a "glued to the asphalt" feeling on smooth twisty roads. Features include: * Model-specific optimized ride tune * QS3: 3-position quick-switch compression adjustment * QSR: 3-position quick-switch rebound adjustment * Spring preload setting guide marks * Aluminum piggyback reservoirs * Gas-charged mono-tube with internal floating piston (IFP) design * 6061-T6 aluminum Type III hard-anodized bodies * Fully rebuildable and re-valvable * Advanced high-flow, deflective disc velocity-sensitive damping * Low-friction, super-finished hard chrome shafts * Matte black springs and black anodized preload rings * What's in the box? -- 2 shocks -- Spring preload spanner wrench -- Alignment kit -- Instructions and user manual -- Fox sticker (Combine with the new FOX GRIP Street Performance Fork Cartridge Kit for Harley Dyna to achieve ultimate comfort and control.)
Not Yet Reviewed
$1,399.95
QA1's modern truck suspension kits provide your truck with a better stance and improved performance. Whether you're looking for a mild 2/3 in. drop or a more aggressive 4/6 in. drop, QA1 rear drop kits offer the perfect solution for lowering the rear suspension of your Silverado or F-150. These are fully bolt-in kits that include powdercoated shackles, hangers, and QA1 Stocker Star shocks (single or double adjustability), ensuring hassle-free installation and superior ride quality. Achieve a sleek, sporty look for your truck, matched with an incredible ride quality with QA1 kits. (F-150 kits include flip brackets). Features: * QA1 single and double adjustable shocks deliver exceptional ride quality and performance to your truck. With the simple turn of a dial, you can effortlessly switch between a comfortable cruise and a more aggressive feel, making them ideal for daily driving or twisty backroads. * QA1 rear flip kit (F-150) and shackle and hanger kits are the ultimate solution for lowering the rear of your truck without compromising ride quality. Made from heavy-gauge steel with a powdercoated finish and top-notch hardware, QA1 kits guarantee long-lasting performance in any driving conditions.
Not Yet Reviewed
$1,059.32
—
$1,260.83
The Fox Racing Shox Performance Series 1.5 QS3 shocks are a direct bolt-on replacement for your stock shocks and springs. Take your Honda® Pioneer from a capable utility vehicle to a full-on sport vehicle to tackle the kind of off-road terrain that will leave you grinning ear to ear. These shocks replace your stock emulsion shocks with an internal floating piston (IFP) system housed in the piggyback reservoirs to keep the gas charge from mixing with the shock oil. This keeps the oil from effectively thinning out and losing damping control as the shocks get worked over washboards, rocks, and big dips. The Quick Switch 3-position compression damping adjustment allows you to quickly set your shocks to adapt to your riding conditions with three different settings. Set the QS3 to Setting 1 for the softest ride on smoother trails or rock crawling. Setting 2 firms things up a bit if carrying extra passengers or gear. Setting 3 gives you bottom-out protection when you put your foot down and catch some air off a dune or decide to sprint off into the desert. Beyond the extra capability you gain after bolting on a set of the Fox Racing Shox 1.5 QS3 shocks, you'll have peace of mind knowing that they're ruggedly built with hard-anodized aluminum bodies and reservoirs that resist corrosion, 5/8-inch hard chromed shafts for smooth operation and longer seal life. Plus, they are fully rebuildable if you ever damage a part or want to get them custom-valved for a specific riding application. Key features: * Sold as a pair for the front or rear (please specify application needed) * Type III hard-anodized aluminum body and reservoir * Internal Monotube design—gas charged * Spherical bearing/PTFE bushing material * High-flow velocity-sensitive damping * Reservoir and coilover springs included * Standard or heavy-duty spring rate * 5/8 in. hard-chromed shaft * Internal Floating Piston (IFP) * Ultra-durable bottom-out bumper * Upper and lower eyelet for mounting
Not Yet Reviewed
$1,299.99
On Sale
All-Pro Off-Road Extreme suspension lift kits gather everything into one package that has all the "trick" parts for your factory solid axle toy. That means flexy off-road performance, positive control on the highway—and stable, predictable suspension in all driving conditions, on or off-road. This is far more than a simple bolt-on kit. It provides up to 4.5 to 7.5 in. of lift, depending on the springs used. The front axle is moved forward 1.5 in. as compared to stock; and with just minor fender trimming, it provides room for 35 in. x 12.50 tires mounted on 10 in. wide wheels. With some additional firewall work, it's possible to fit up to 38 in. tires. Due to the extra flex, All-Pro recommends switching to the wider rear axle from a 1986-95 Toyota Pickup or 4Runner. These axles have larger drum brakes and are 3 in. wider than the 1979-85 rear axles. This allows for more clearance between the tire and frame that can otherwise be a problem when running tires larger than 33 in. All-Pro offers 1.5 in. wheel spacers (not included) to use on the front axle to match these wider rear axles. Order the Extreme lift kit with the options preferred for your application.
Not Yet Reviewed
$1,499.99
$1,274.99
RideTech RidePro E5 Air Ride Suspension leveling control systems adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. Whether you are driving alone to work or on your way to a show with a car or truck load of friends, RidePro E5 will calculate proper air spring rate and balance, then work diligently in the background to maintain proper spring pressures and vehicle height. RideTech RidePro E5 leveling systems feature: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Includes ECU, control panel, air pressure sensors, wiring harnesses, and instructions
Not Yet Reviewed
$1,555.00
AccuAir Suspension high duty-cycle helper air compressors feature three programmable settings and a sleek easy-to-mount module. The industry's only 100 percent duty-cycle compressor features an on-board air port, allowing you to connect a tank for on-board air storage or direct inflation of tires, paddle boards, toys, and more. Features: * Regulates to three user-defined programmable pressures * Automatically adjusts to and maintains set pressures * Dual path control allows for the difference in pressure between the left and right air spring * 200 psi maximum pressure * 100 percent duty cycle at 100 psi * 55 percent duty cycle at 200 psi * 1.58 cfm at 0 psi
Not Yet Reviewed
$1,099.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
