Availability
Showing In Stock Items. Show All 108 Items.
SPS Performance offers a wide range of specialty tools for maintenance and repair for both domestic and imported passenger vehicles, including bushing extractor tools that provide significant benefits in terms of time savings, cost reduction, safety, and efficiency. The specialized design of the bushing extractor tools allows for easy access to tight spaces, making jobs that would otherwise require a full disassembly much more manageable.
Not Yet Reviewed
$242.99
Rock Jock Johnny Joint assembly/disassembly tools are designed to make the servicing of Rock Jock's popular 2 in. and 2 1/2 in. Johnny Joint rod ends simple! The tools can be used either in a bench vise or on the vehicle for repairs and rebuilds of Johnny Joints. Construction is CNC-machined heat-treated steel components, all-thread, and premium thrust bearings. These tools are completely rebuildable, and all parts are available through Rock Jock.
( 1 )
$150.00
Rock Jock Johnny Joint front-end housing kits replace the upper control arm bushings of your factory differential housing for maximum articulation of your suspension. These kits include Johnny Joint inserts to switch out with the rubber bushings on the axle housing, greasable bolts, and installation tool. Rock Jock's Johnny Joints are durable high-articulation urethane suspension joints featuring a smooth steel ball that pivots inside a proprietary urethane shell to provide over 30 degrees (per joint) of quiet, shock dampening articulation--without the excessive deflection found in soft rubber-based "flex joints". Johnny Joints deliver a smooth, comfortable on-road ride with the ultimate in off-road capability.
Not Yet Reviewed
$226.00
Your car's bushings are dried-out and in need of replacing, but keeping your favorite ride in top form can drain your wallet. No worries, now you can maintain your investment and get the best value for your money with RESTOPARTS® Manufactured body bushing kits. These kits are still produced in custom case-hardened steel tools—expensive, but the right way to do it—ensuring a precise, injection-molded rubber bushing every single time. Plus, each steel insert is stamped the right way—in authentic zinc. The bushing kits are available with or without hardware for many applications from the 1950s thru the 1980s. Get time-tested and proven quality for your dollars with quality parts by RESTOPARTS®.
( 51 )
$109.99
—
$199.99
SPC Performance xAxis control arm bushing replacement kits are designed to fine tune your handling and alignment on your vehicle. These kits include the xAxis bushings to service two control arms and includes a press tool. Important Note: You will need access to a shop press to install these parts.
( 4 )
$174.99
—
$203.99
Made from heat-treated 4140 chromoly spring steel, these Hellwig anti-sway bars reduce body roll, even during tight cornering. They come with high-durometer polyurethane bushings to ensure superior performance—and install easily with basic hand tools. Mounting hardware is included.
( 569 )
$209.50
—
$277.95
aFe Control leveling kits are made from 6061 billet aluminum and provide a lift in the front for better off-road performance while also eliminating the "nose-down rake" notorious on stock trucks. Choose the set to fit your specific application. Features: * High-quality hardware for strength and durability * Red anodized finish for great looks * Increases front ground clearance * Easy bolt-on installation, requires no modifications, can be done at home with the proper tools and safety precautions * Installing these spacers does not require disassembly of the strut/spring
( 6 )
$117.60
—
$215.25
Gene Smith Quality Reproductions heavy-duty sway bars are quite simply the single largest handling improvement you can make to your classic 1955-1957 Chevy. Using quality tooling, these 1 in. diameter bars feature a heavy-duty solid steel construction with a powdercoat black finish and utilize the same excellent hardware—GM designed hardened steel brackets, and Grade 5 and Grade 8 bolts, not single bolt mounting hardware with chopped off angle iron brackets. The bars are designed to fit all Tri-Fives, disc brake conversions, and Heidts control arms and provide excellent tire clearance.
( 2 )
$236.99
BMR sway bars are the most significant handling upgrade you can make to your vehicle. With hand tools and about an hour or so of your time, BMR sway bars will deliver the most noticeable handling improvement to your ride. BMR chooses to cold form their tubular sway bars instead of the conventional hot formed process. For you that means better resistance to torsional fatigue, more consistent "memory" retention, and money well spent for lasting performance and driving enjoyment. BMR put countless hours into developing and testing the ideal rates for their bars, so feel their passion for perfection by installing one of their sway bar kits--you're in control with BMR Suspension.
( 102 )
$129.95
—
$269.95
Gabriel Ultra ReadyMount struts will make your big job a much smaller task. These exceptional struts are precision-engineered, one-piece designs that save you valuable time during installation. The suspension strut assemblies offer extensive testing and all-new components, along with a premium strut to provide the perfect fit and safety. These struts feature Gabriel's G-Force technology and super-finished chromed piston rods to deliver enhanced ride performance. There are no missing parts, no special tools or equipment—just top-quality, well-tested durability and performance. There's a lot riding on your struts. Make your choice Gabriel Ultra ReadyMount fully loaded strut assemblies, available in many configurations for vehicles from 1985 and up.
( 165 )
$100.99
—
$253.99
Competition Engineering bump steer kits are designed for vehicles that have been raised or lowered and have unwanted toe changes and bump steer during suspension travel. These fully adjustable kits replace non-adjustable stock components with precision, aircraft-quality components that bolt into place with common hand tools. Made from a strong billet aluminum these kits are built to perform.
Not Yet Reviewed
$158.99
RT Off-Road creates steering shafts with benefits. They're an affordable way to regain and improve your vehicle's street and trail performance—a definite improvement over the factory design to enhance responsiveness and handling. The increased material thickness and shaft component construction lends added durability and rigidity. They install into the factory location with simple hand tools. Choose the model designed for your specific vehicle, then equip your rig with the benefits of RT Off-Road steering shafts.
( 4 )
$149.99
—
$206.99
BMR cradle bushing lockout kits reduce wheel hop, deflection, and cradle movement—with virtually no change in NVH. They're specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum "bullet" inserts. The kits are finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. These bolt-on kits use existing holes and hardware, allowing for easy installation with simple hand tools. Choose the model designed for fitment with your vehicle. When subframe performance is a must, rely on BMR Suspension!
( 7 )
$109.95
—
$239.95
BMR Level 2 cradle bushing lockout kits reduce wheel hop, bushing deflection, and cradle movement. The kits contain CNC-machined 6061 T-6 billet aluminum upper bushing lockout rings, CNC-formed stainless steel lower bushing support plates, and heavy-duty 1 5/8 in. DOM steel tubing cradle braces. BMR Level 2 cradle bushing lockout kits are 100 percent bolt-in, utilizing existing bolt holes and hardware. BMR Level 2 cradle bushing lockout kits: * No fabrication needed * Installs with simple hand tools * Laser-cut lower bushing support washers * Positively locates the rear IRS subframe * Greatly reduces stock subframe bushing deflection and wheel-hop * Uses factory bolt-holes and hardware * Adds a solid rear jacking point to each side of the vehicle * Durable powdercoat finish in black hammertone and red
( 9 )
$199.95
Avoid costly trips to the dealership by repairing steering issues with these Dorman steering shafts. They feature precision U-joints to give your vehicle tighter, more responsive steering. Best of all, they install easily with basic hand tools. Take control of your steering with one of these Dorman steering shafts.
( 59 )
$105.99
—
$256.99
OER offers a wide selection of steering components for many make and model vehicles, including steering gearboxes. The gearbox in your vehicle makes it possible for you to steer the vehicle to the desired direction. Steering can become a matter of concern if your steering gearbox starts to fail. If you're sure the gearbox is the culprit for poor driving performance, you need a compatible replacement to help you regain steering control. OER steering gear boxes are manufactured with all new tooling replicating the original ratio for a correct replacement. Restore the steering performance of your vehicle with the OER steering gear box designed for your application.
( 1 )
$232.99
—
$261.99
These lightweight, tubular steel panhard bars let you precisely adjust the location of the rear-end housing in relation to the chassis to compensate for lowered ride heights. They also have forged ends for strength and a tough powdercoated finish. Hardware is included and they install in the stock location with basic hand tools.
( 2 )
$140.99
Steeda Ford Mustang subframe bushing support systems will tighten up your muscle car's rear-end for enhanced performance. Crafted from CNC-machined 6061 aluminum, the bushing kits eliminate the rear subframe movement notorious in 2015 and later Mustangs--and allow your car to increase traction to the rear wheels. They're also the first step towards eliminating wheel hop. Install a much more solid feel with Steeda Ford Mustang subframe bushing support systems. Benefits include: * No increase in NVH * Easy-to-install with basic hand tools * No permanent modifications required * Lifetime warranty
( 3 )
$184.95
These Slam Specialties air tanks can be used in conjunction with an on-board compressor system to reduce air suspension fill times. They're ideal for filling air shocks, tires, operating air tools, or performing simple tasks around the garage and house. The heavy-duty steel tanks are available in a range of capacities to suit your needs.
Not Yet Reviewed
$119.01
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$119.95
—
$259.95
Enhance your Jeep Wrangler's handling and performance with JKS quicker disconnect sway bar end links. The quicker disconnects have a heavy-gauge steel construction and computer-controlled MIG-welding to ensure unsurpassed strength and quality. Powdercoated finish offers added durability. The quicker disconnect sway bar end links are sold in pairs and are available in applications to accommodate vehicles lifted for 0 to 2-inch lift or vehicles 2.5 in. to 6 in. lift. Select the quicker disconnect sway bar end links designed for your vehicle's specific application needs. Product features and details: * Heavy-gauge steel construction and computer-controlled MIG-welding ensures unsurpassed strength and quality * Durable, black powdercoat finish for long-lasting corrosion resistance * Allows you to easily correct the sway bar geometry of lifted Jeep Wranglers for better handling * Available in applications for vehicles lifted for 0 to 2-inch lift or vehicles 2.5 in. to 6 in. lift * The quicker disconnect sway bar end links for 0 to 2-inch lifted vehicles include a pair of frame mounted retention brackets to keep the links and sway bar in place when disconnected * Quicker disconnect sway bar end links for JL or JT Jeeps with 2.5 in. to 6 in. lift feature quick-release pins that make it easy to decouple and reconnect your front sway bar * Dramatically improves off-road performance on stock or modified Jeeps low-profile grease fittings to ensure easy bushing lubrication and protection from trail damage * Variable length design adapts to your vehicle and future modifications * Straightforward, bolt-on design makes installation easy using basic hand tools * Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
Not Yet Reviewed
$176.95
Chassis flex is one of the primary enemies of good handling and efficient suspension. The front tires can't stay planted if your strut towers lack the rigidity they need. Now, you can stiffen and reinforce the front-end of your chassis with Steeda strut tower braces! These chromoly steel bars are available in 2- and 3-point configurations for fitment on a variety of Ford Mustang, Focus, and Fusion models, as well as the Lincoln MKZ. Each brace is black powdercoated to resist rust and corrosion, and the easy bolt-in installation takes only minutes with common hand tools. You'll notice immediate improvement in ride quality and control. Order the Steeda strut tower brace designed for your specific vehicle.
( 18 )
$124.95
—
$239.95
Hotchkis Sport Suspension Performance Series shocks by FOX are one of the easiest modifications you can make to your ride, dramatically improving grip, steering response, and control. They're manufactured by Fox and tuned by Hotchkis engineers to be the ultimate single adjustable shocks for your muscle car. The shocks are built using the most advanced development tools available; the valving is fine-tuned to deliver a smooth, comfortable ride on their softest setting—and a more aggressive, race-oriented ride on the stiffest setting. Created as part of a balanced system, Hotchkis Sport Suspension adjustable Performance Series shocks by FOX give your vehicle more control and balanced handling, especially when installed in conjunction with a Hotchkis Total Vehicle System. They're built with heavy-duty billet aluminum end caps, polyurethane bushings, and hard chrome plated, heat-treated alloy shafts, ensuring years of trouble-free operation.
( 3 )
$211.79
—
$260.99
BMR Suspension cradle chassis braces provide an affordable way to lessen wheel hop and cradle movement on your vehicle. These lightweight, 100 percent bolt-on "stiffeners" use existing bolt holes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the steel braces greatly reduce cradle deflection. BMR cradle braces are offered in various powdercoat finishes for long-lasting good looks and service life. Available individually or in pairs, choose the braces designed for fitment on your vehicle application.
( 4 )
$149.95
—
$229.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
