Availability
When servicing your RideTech suspension, be sure to use the right parts. RideTech offers a wide variety of replacement air line fittings to ensure secure connections. They're manufactured from quality materials and install easily with no modifications. The push-to-connect fittings are available in a variety of sizes and configurations.
( 24 )
$10.00
Haltech offers a variety of data acquisition components and accessories to facilitate automotive performance and engine management. These weld fittings enable you to make secure connections when plumbing key paths for the data streams. The fittings are machined from aluminum and are available popular sizes.
( 2 )
$16.00
Low Range Off-Road weld-in bungs are great for those using FJ80 tie rod ends for panhard bars and steering linkages. They are also useful for international customers who can save money on shipping by making a do-it-yourself kit using their own tubing. These weld-in insert bungs are available with a round head or new Hex head design. The hex shoulder allows you to easily adjust linkage length with only a wrench. The large shoulder on hex bungs also reduces the chance of damaging them while welding. These weld-in bungs are available in left and right hand thread. Sold individually.
Not Yet Reviewed
$18.48
Control the flow of your power steering fluid. General Motors style power steering pumps exceed the recommended flow for a Ford rack, resulting in quick turning and a twitchy feel while turning. Borgeson universal power steering pump pressure-reducing kits are designed to correctly reduce the flow, allowing for smooth, precise turning every time.
( 79 )
$16.88
Air Lift offers a variety of union fittings for use with their systems. The right hardware ensures a correct installation. You can count on Air Lift for the quality parts you need.
( 10 )
$11.99
If your Johnny Joints need to be rebuilt or your damaged parts need to be replaced, here's the hardware required to service your special rod ends. Rock Jock Johnny Joint rod end bolts include a greasable bolt with a Zerk fitting installed in its head, two flat washers, and a crush nut. Order the size needed for your application. Keep your Johnny Joints in great working order with rebuild parts from Rock Jock.
( 1 )
$15.00
—
$19.00
Summit Bucks
ACDelco oil cooler connectors provide a tight, leak-free bridge between the oil cooler lines and cooler. These are factory-recommended replacements for your vehicle's OE components. The fittings are machined for a variety of GM applications, providing the same performance, durability, and service life you expect from original equipment.
Not Yet Reviewed
$11.99
—
$20.99
On Sale
Artec Industries universal link bushings are the perfect multi-functional product for your fabrication needs. Whether you are using these link bushings for suspension joints, motor mounts, or any number of other uses, the Artec Industries universal link bushings are built with strength in mind.
( 1 )
$26.49
$19.87
Increasing or decreasing ride height can put a strain on your truck's driveshaft. To eliminate this problem, use Old Man Emu driveshaft spacer kits. The spacers will lower the risk of encountering a slip yoke, as well as driveline vibrations, so you can crawl the toughest trails and terrains in complete comfort. Kits include spacers, bolts, and washers.
Not Yet Reviewed
$19.95
Old Man Emu coil spring spacers are designed to fit between the coil spring and the vehicle body, acting as a cushion to help eliminate spring-related squeaking and clunking. They're made from durable polyurethane. Whether you're traveling on harsh outback roads, using your vehicle for competition racing, or towing a camper trailer, the importance of a fully-integrated 4x4 suspension is paramount. Old Man Emu suspension parts can significantly enhance performance for a more enjoyable driving experience.
Not Yet Reviewed
$11.95
—
$22.95
These Light Racing Schrader valve extensions are required to adjust the nitrogen pressure in your Light Racing JounceShocks. The JounceShock fill valve is recessed in the foot end of the shaft, underneath the threaded contact foot. Just install the Light Racing Schrader valve extensions and make the necessary adjustments in seconds.
Not Yet Reviewed
$14.99
Old Man Emu anti-inversion kits are a must if you are not fitting greasable shackles for your leaf spring suspension. These plates will prevent the springs from inverting. OME kits are available for a variety of applications. Choose the plates designed for your vehicle.
Not Yet Reviewed
$19.95
Certain suspension upgrades may require relocating brake line and ABS wire. Old Man Emu ABS bracket hardware packs are must-haves in these situations. Their brake line/ABS wire bracket kits allow you to move the wires to a better location to prevent the factory lines from being stretched too tight (or damaged) when the suspension is fully extended. Choose the kit designed for your vehicle.
Not Yet Reviewed
$12.95
—
$20.95
Level your vehicle with Old Man Emu leaf spring trim packers. Manufactured from mild steel, these 5mm leveling plates correct left to right trim problems. They are offered in several sizes (width, length, and hole diameter). Choose the ones designed for your vehicle.
Not Yet Reviewed
$18.95
Fox Racing Shox offers a variety of replacement components for their shock absorbers. From damping and bar pin assemblies, to check valves and hardware, you can repair or rebuild your suspension without the expense of complete replacement.
( 1 )
$10.00
—
$22.00
Gabriel air shock fill hose kits let you mount valves in a convenient place for pumping up those air shocks. There might just be a little more bounce in your step when you're finally able to add air and lift to your shock absorbers with ease! Kits include: * Four tube nuts * Four tube clamps * Ten packing O-rings * Tube * Tee block with air valve fitting * Valve core * Washer * Two hex nuts * Seal
( 39 )
$22.99
Good vehicle handling starts with proper shock absorber installation. UMI Performance shock installation hardware kits include all the parts you need for correct fitting of your Viking or AFCO shocks. Order the UMI Performance shock installation hardware kit designed to fit your vehicle.
( 5 )
$11.99
—
$15.99
Summit Bucks
Monroe Air Shock adapter kits have the hardware that you need to fit your air adjustable shocks. The kits are available in different styles--and typically include T-fittings, O-rings, hose, hose clips, and shock air fittings to install your Max-Air shocks.
( 25 )
$19.99
If you have a Jeep, you need OMIX-ADA! Their leaf spring shackles are rugged, quality-made OE replacements to keep you rolling over your terrain of choice safely. OMIX-ADA offers left hand shackle thread, right hand shackle thread, and unthreaded styles to meet your needs. These factory-style shackles may include seals, retainers, fittings, and shackle bushings. You're driving the toughest 4-letter word on wheels--make sure that you buy replacement parts to match. OMIX-ADA leaf spring shackles are the ones that you need.
( 18 )
$11.50
—
$21.99
If you've got spherical rod ends on your vehicle, you'll probably need jam nuts, right? You might also need them for tie-rod ends or other types of fittings and connectors. Summit Racing™ jam nuts are made from premium steel (zinc-coated for corrosion prevention) and aluminum, and they're available with either right hand or left hand threads.
( 7 )
$10.99
—
$20.99
Eibach spring perch adapters will enable you to extend the available range of your coilover spring rates. If your suspension has metric springs, it may limit the use of other rate springs. To compensate, these perch adapters allow the fitting of U.S. standard sized springs—providing better selection of rates and sizes for lowering the car. CNC-machined from aluminum to be durable, lightweight, and accurate, these hardware units allow you to adapt from 60mm to 2.50 in. SAE springs.
Not Yet Reviewed
$21.00
Heavy-duty rod ends are ideal for today's flexible suspension systems. Super-strong creeper joints are designed to hold up to years of punishment. However, over time rod ends will become worn and their performance deteriorates. Make an upgrade with the Trail-Gear creeper joint rebuild kits. These assemblies include one snap ring, two bushings, two washers, and grease zerk fitting. Note: You will need a press to install Trail-Gear's creeper joint rebuild kits, and will need to grease the joint after installation. Maintain your off-road machine with Trail-Gear!
( 2 )
$19.99
RideTech replacement air line tubing is available in a variety of lengths and diameters, with or without fittings included. The durable black plastic tubing is DOT-approved and is an ideal replacement for your air spring suspension. Order just the tubing or an entire kit designed to fit your application.
( 12 )
$20.00
GSI Machine and Fabrication brake hose mounting tabs are laser-cut from thick stainless steel. Available in different styles, these bolt-on tabs are a great way to attach bulkhead fittings to your chassis. Select the style needed for your application.
Not Yet Reviewed
$14.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
