Availability
A lightweight setup capable of handling everyday street abuse! UMI Performance front non-adjustable lower A-arms remove 5 1/2 lbs. from of the front of your vehicle, while adding increased ride quality and reducing bushing deflection. These suspension control arms are supplied with new greaseable ball joints installed, polyurethane or Delrin® bushings, and sway bar mounting provisions. The A-arm replacements are fabricated using 1.250 in. drawn-over-mandrel tubing and CNC-machined ball joint holders. They feature both MIG and TIG welding for the utmost in product strength. Order the pair recommended for your vehicle. Additional features: * 1.250 in. x 0.120 in. mild steel tubing * Shock mounts are CNC-machined from 0.188 in. steel plate * Supplied fully assembled and ready to install * Durable black or red powdercoat finish * Use OEM hardware
( 10 )
$729.99
—
$859.99
Tame those turns and upgrade your handling with a set of Summit Racing™ premium front control arms. Constructed from CNC-bent DOM tubing, these replacement arms are designed with optimized ball joint angles for proper suspension travel, plus optimized arm lengths to improve alignment and handling. Their black powdercoat finish provides equal amounts of protection and attitude, and they bolt on just like the original equipment. All of the ball joints and bushings that you need are included, so you can spend less time installing and more time enjoying the ride! Order the pair recommended for your vehicle.
( 57 )
$464.99
QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.
( 22 )
$604.95
—
$815.95
UMI Performance front adjustable upper A-arms were designed to outperform the stock setup. Whether you use them at the race track or as added improvements to your daily driver, they've been tested and improved to handle both applications. UMI Performance front adjustable upper A-arms are designed to add front-end rigidity, improved handling and strength, and to eliminate the flex found with stock A-arms. UMI Performance A-arms are built using strong DOM steel tubing and 0.188 in. CNC-machined ball joint mounts and are supplied with XM Endura series rod ends. These A-arms are supplied with high-quality spherical bearing rod ends. These rod ends replace the stock rubber bushings found in the OEM arms. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined 0.188 in. ball joint mounts * Adjustment for cast and camber * -3 degree improved ball joint angle for lowered vehicles * Durable powdercoated finish * Use OEM hardware
( 5 )
$569.99
—
$729.99
Designed for the specific needs of drag racing, QA1 GM 2.0 drag racing control arms are bolt-in upgrades to the original suspension or outdated tubular control arms. Besides improving overall handling, ride quality, and vehicle stance, these arms improve factory suspension geometry and pave the way for planning additional upgrades. The increased positive caster design improves straight line stability. QA1 arms are compatible with OE-style sway bars and come with droop stops on the upper arms with bump stops on the lowers. The droop stops are adjustable to enable the perfect front-end rise for optimized launches. These arms feature ultra-low friction composite bushings for smooth bind-free movement and optimal weight transfer during launch. The high-strength low alloy steel enables a thinner wall construction and results in an overall lightweight package. Note: GM 2.0 drag race arms are not compatible with factory coil springs and must be used with a coilover system.
( 2 )
$739.95
—
$900.95
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$575.00
—
$795.00
Global West Suspension TLC drag series upper control arms are fully assembled with billet aluminum cross shafts, special Delrin bushings, and shortened bump stops. They are made out of 4130 chromoly and shave almost a full 10 lbs. off of the front-end over stock control arms. In addition, bump steer is reduced through new geometry induced by the control arm. One of the biggest problems that most production cars have is not enough caster. Caster provides straight-line stability and reduces wandering at high speeds. It is part of the front-end self-aligning force. For this reason, caster is essential on drag cars. Unfortunately, there is never enough caster available using stock front-end components. Too many alignment shims are needed and possible camber problems can occur. TLC upper control arms are built with additional positive caster, and setting camber is never a problem.
( 7 )
$592.62
Designed for the pro-touring GM enthusiasts, QA1 GM 2.0 pro-touring control arms are a simple upgrade over original suspension or worn and outdated tubular control arms. The pro-touring arms are also for those wanting to improve their overall handling, ride quality, and vehicle stance. These arms will improve suspension geometry over the factory configuration and pave the way for planning additional upgrades. The high-strength, low alloy steel enables optimized thinner wall construction and results in overall lighter weight. The increased positive caster design improves straight line stability. Pro-touring arms also feature QA1's stronger, low maintenance, and rebuildable ball joints which feature integrated dust boots. Note: These control arms are not compatible with OE-type springs, a coilover system must be installed. QA1's arms will accept factory type sway bars and include upper and lower bump stops.
( 14 )
$706.95
—
$900.95
UMI Performance front non-adjustable upper A-arms are designed to add front-end rigidity, increase strength, and eliminate the flex found with stock A-arms. UMI Performance front non-adjustable upper A-arms are built using strong DOM steel tubing and 0.188 in. thick CNC-machined ball joint mounts and are supplied with greasable polyurethane bushings. These upper A-arms also feature a -3 degree improved ball joint angle for lowered vehicles. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * Adjustment for cast and camber * Brilliant durable powdercoated finish * Use OEM hardware
( 1 )
$599.99
—
$679.99
Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.
( 182 )
$1,095.95
—
$1,319.99
UMI Performance complete front adjustable upper and lower A-arms were built with this in mind--to offer the strongest manufactured item on the market, while adding great weight savings over the stock piece. UMI Performance complete front adjustable A-arms are built using strong DOM steel tubing, 0.188 in. CNC-machined shock mounts, Moog Problem Solver greasable ball joints, and QA1 XM Endura series rod ends. A-arms can be installed on the stock K-member or any aftermarket K-member. They are designed to reduce front-end weight, as well as "unsprung" weight, providing improved handling performance to the front of your vehicle. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined ball joint cups * Grade 8 shock mounting hardware included * Durable powdercoated finish * Use OEM hardware
( 1 )
$1,529.99
RideTech TruTurn StrongArms packages are upgraded control arm systems that include tubular StrongArms, tall ball joints, Delrin bushings, and tie rods. What can you expect from these systems? Resolved bump steer and camber gain issues. Your tires will lean into the turn, the bump steer is optimized to under 0.065 in. through 5 in. of suspension travel, and you have the clearance to run up to a 275mm tire. These packages are available for hundreds of vehicles; order the kit recommended for your application. Features: * Taller upper ball joints to increase camber gain * Integrates with OEM spindles * Centers the wheels in the wheelwell with increased caster settings * Includes upper and lower StrongArms, outer tie rods, and billet tie rod adjusters
( 2 )
$1,775.00
G-Plus control arms from Global West are suspension components with high performance angles! From street applications to drag and road racing, these black powdercoated tubular arms improve geometry by changing their length, or specific angle, to improve your vehicle's handling. They combine increased caster and improved camber curve to keep your tires flatter on the pavement. A bump stop is installed that allows for a limiter and eliminates the stock bump stop on the frame. They can be used with stock or 2 in. drop spindles, as well as ATS spindles—and are offered with either efficient polyurethane bushings, or Del-a-lum bushings that allow for smooth pivoting without bind or deflection. Order the front and/or rear G-Plus control arms recommended for your vehicle.
( 128 )
$634.00
—
$766.39
Global West Suspension TLC Drag Series lower control arms are similar to their line of G-Plus lower control arms, but with modifications designed just for drag racing. They have been "beefed-up" to handle wheel stands and extreme loads and are considered to be load carriers. Weight savings are minimal, though, when upgrading to TLC Drag Series control arms, due to the wall thickness of the tubing used to construct them. To help offset this, all sway bar attaching points have been removed.
( 6 )
$665.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
