Availability
Showing In Stock Items. Show All 207 Items.
SPC Performance ball joints are quality replacements for worn ball joints on your control arms. The ball joints are offered in a variety of configurations, and will work perfectly with SPC Performance control arm components. Order the SPC Performance ball joint suited to fit your application needs.
( 19 )
$176.99
—
$212.99
Trail-Gear FJ-80 knuckle rebuild kits are available with or without wheel bearings. The kits contain all of the replacement parts you need to service your steering knuckles. Trail-Gear FJ80 knuckle kits will service both left and right knuckles. Trail-Gear FJ-80 knuckle rebuild kits typically include: * Gaskets, felts, seals, washers and shims * Inner axle seals and outer felt covers
( 5 )
$129.99
—
$199.99
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$899.99
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 103 )
$382.99
—
$497.99
Looking for a steering box for your Toyota's steering system? Trail-Gear IFS remanufactured steering boxes are thoroughly flushed and rebuilt. All boxes are completely tested before shipping.
( 3 )
$699.99
Has it been a while since you serviced your knuckles? Trail-Gear knuckle rebuild kits contain all standard replacement parts, including gaskets, felts, seals, washers, and shims to do the job done right. They even include outer felt covers--a Trail-Gear exclusive! If you're using your truck in the rocks you will want to replace these covers when you service the knuckles. Kits are offered with or without wheel bearings. Service your knuckles with Trail-Gear knuckle rebuild kits.
( 4 )
$149.99
—
$199.99
After years of development and testing, Trail-Gear fully loaded Six Shooter kits have set a new standard for Toyota knuckle strength and reliability. They totally eliminate the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker-than-stock material, and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC-machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail-Gear can deliver. These kits include a special 6-hole shim pack for use between the top of the knuckle and the steering arm assembly. A minimum of four additional steering arm studs are required for installation.
( 3 )
$499.99
—
$699.99
Trail-Gear pitman arms are designed from solid forged steel construction, and are ideal for use with crossover steering. Replacing your pitman arm is recommended if the original is worn-out or, in most cases, if your steering box is being changed out. These strong, extra-wide one-piece arms will allow the use of FJ80 tie rod ends. They're available in flat style or with the same drop as the factory pitman arm.
( 1 )
$129.99
Trail-Gear solid axle steering kits support your determination to put together your own SAS kit to lift your first-generation Tacoma. How, you ask? When you have trouble finding the right parts to link your steering to an IFS steering box, you know the answer--Trail-Gear. These TG solid axle kits utilize the same steering parts from their own SAS kits to take the guesswork out of making your own steering linkage. You'll receive an adjustable-length double-D steering shaft, a firewall plate, a steering shaft seal, and U-joints for both ends of the shaft. Trail-Gear is ready to lend a hand with their solid axle steering kits.
Not Yet Reviewed
$379.99
Edelmann Elite power steering filters solves the shortcomings of P/S filters that came before them. They raise the bar on filtering performance to protect the power steering system from contaminates while providing coverage for over 99 percent of vehicles with hydraulic power steering. Incorporating materials such as aircraft-grade anodized aluminum, these universal power steering filters encapsulate Edelmann's Elite philosophy of delivering first-class quality problem-solving products. Connectors and hose clamps are included. Features and benefits: * High capacity stainless steel mesh filter * Larger, more powerful magnet captures additional metal fragments * Dual filtration technology captures metal and non-metallic debris * Built-in safety bypass ensure flow is not inhibited * Aircraft-grade, anodized aluminum body * Serviceable body for a lifetime of use * Easy to clean * Engineered to fight against premature power steering pump and rack failure * Works great in automatic transmission cooler lines, tool * Interchangeable connectors for 3/8 in., 1/2 in., and 5/8 in. hoses
( 4 )
$39.99
Energy Suspension tie rod end dust boots resist damage from dirt, rocks, sand, water, road salt, and oils, while adding a colorful touch to your steering linkage. Each boot has an important 5-point sealing action that prevents contamination and loss of lubricant—the major cause of rod wear. Your factory originals are likely molded rubber, which will dry rot, crack, and split over time. Energy Suspension bushings are constructed from durable polyurethane in a variety of shapes and sizes to fit countless vehicles. Order them by the pair, the dozen, or in larger quantities!
( 130 )
$5.44
—
$5.60
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
Low Range Off-Road steering knuckle rebuild kits contain the replacement parts needed to successfully service steering knuckles. Available for a variety of makes, models, and axles, LROR has chosen the best quality components and does not sacrifice quality for price. While competitors' kits may include only the bare essentials, Low Range Off-Road includes the parts often missing from other kits. Their Ultimate knuckle rebuild kits include upgraded seals, high-quality Koyo bearings, and more. LROR even includes the specialty tools needed to complete the job. Simply put, they are the best, most complete knuckle rebuild kits available. One kit covers both sides of the axle and most kits are available with or without wheel bearings. Low Range Off-Road knuckle rebuild kits typically include (varies by application): * Gaskets * Inner axle seals * Bearing seals * Knuckle seals * Hub seals * Trunnion (kingpin) bearings * Backing plates or backing plate eliminators * Spindle bushings * Spindle nuts and washers * Trunnion shims * Steel outer felt covers—not found in most other kits * Hub dial O-rings Notes: * Since they're not included in all kits, wheel bearings and spindle bushings should be checked when rebuilding the axle. * Some kits may contain Timken or Schaeffler/FAG bearings when Koyo bearings are not available. * Hub gaskets are sold separately for some applications.
Not Yet Reviewed
$453.88
Trail-Gear heavy-duty steering kits solve feedback issues caused through the stock steering setup. Bigger tires and a lifted suspension are necessities for off-roading today—unfortunately, the combination can cause problems. TG kits will reduce steering vibrations, so you can enjoy a more comfortable driving experience. They offer kits for multiple applications that will strengthen your setup for more assurance on the trails. Trail-Gear steering kits include right and left-hand thread heavy-duty FJ80 tie rod ends, drag link, and hardware. The tie rods and drag link are made from hefty 1/4 in. thick wall DOM tubing. Your choice of kit may also include steering stabilizer with 9 in. stroke and hardware, or a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm and steering arms.
Not Yet Reviewed
$399.99
Rancho RS5000 steering stabilizers reduce steering shimmy, improve tire control, and give you more control over your vehicle if a tire should blow out. The single stabilizers protect front-end suspensions and are used with tires up to 35 in. tall. Dual stabilizers are for off-roaders with tires 35 in. and taller.
( 134 )
$65.99
SPC camber/caster bolt kits replace your non-adjustable or corroded bolts. These kits provide more adjustment to achieve the proper alignment for your application. Do you have negative camber/caster problems? Think positive! Achieve proper alignment on your vehicle with SPC camber/caster bolt kits.
( 21 )
$29.99
—
$104.99
Cardone new rack and pinion units are built better from the start. Cardone uses what they've learned from remanufacturing, as to where--and why--original parts fail. Their engineers then incorporate improvements into the Select rack and pinions, making them better than the originals. Cardone new rack and pinion units feature: * 100 percent computerized testing at load to ensure reliable performance * All rotating and actuating components are properly hardened, ground, and polished to ensure longevity of the components and their respective seals * Cardone Select Engineered (CSE) Technology ensures that all rack and pinion/gearbox units meet or exceed OE-form, fit, and function * Computerized spool valve balancing ensures exceptional feel and return-ability * Environmentally-friendly coating provides a clean appearance and prevents rust * Supplied with OE-grade seals, O-rings, and boots to provide optimal sealing performance and longevity
( 33 )
$325.99
—
$598.99
Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.
( 6 )
$399.99
—
$899.99
If you're installing crossover steering, the time you'll save with one of these mounting kits is well worth the investment. They make swapping to the Trail-Gear IFS steering box much easier. The heavy-duty kits feature 3/16 in. inner and 1/4 in. outer frame reinforcing plates, with angled leading and trailing edges to avoid frame cracking. You'll also receive Grade 8 bolts, crimp nuts, and dependable DOM tubing to complete the project.
( 3 )
$89.99
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 131 )
$96.99
—
$218.99
Old Man Emu steering stabilizers are designed to reduce the effect of wheel vibration and to improve the feel, handling, and control of the vehicle. They will also reduce the aggressive rotation of the steering wheel over rough roads, without affecting steering wheel return. OME steering stabilizers feature: * 9-stage coil spring valving for optimum performance * 15mm piston rod is stronger than the original * Steel stone guard protects the piston rod against stone damage * 35mm piston and bore provides increased oil volume * Twin tube design protects the internal components against stone damage * Multi-lip seal prevents oil loss * Utilizes original stabilizer mounts for ease of installation (where appropriate)
( 6 )
$104.95
Edelmann power steering filter kits can help restore your steering control and responsiveness. With over 50 years of manufacturing experience and a commitment to OE form, fit, and function, Edelmann is an ideal choice for replacement power steering filters. Additional features include the following: * Polycarbonate casing * Fits standard 3/8 inch or 10 mm power steering return lines * Internal magnet attracts the fine particles
( 3 )
$13.99
SPC Performance EZ cams are designed for non-slotted struts and allow for positive and negative camber change by replacing the OEM upper strut/spindle bolt. They are available for today's most popular lowered vehicles. If you're installing new coil springs or lowering your vehicle, then you'll need a set of these SPC Performance EZ cams.
( 10 )
$22.99
—
$31.99
Protect your inner joints with Moog replacement rack and pinion bellows. These rubber bellows keep road debris and water from entering the inner tie rod and rack and pinion shaft. The kits create a perfect seal that helps guard against premature wear and adds to the life expectancy of your steering rack. Update your damaged bellows with replacement parts from Moog.
( 16 )
$17.99
—
$25.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
